restart loop without error

efevee

Yes.
Was suprised process takes so long especially I have it all upgraded recently:

install starting  - Sun Dec 29 12:57:18 CET 2019
installing on armv7l processor system
the os is Distributor ID: Raspbian Description: Raspbian GNU/Linux 9.11 (stretch) Release: 9.11 Codename: stretch
^[[96mUpdating packages ...^[[90m
Get:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB] Get:2 http://archive.raspberrypi.org/debian stretch InRelease [25.4 kB] Get:3$
apt-get update  completed ok
install starting  - Sun Dec 29 13:23:04 CET 2019
installing on armv7l processor system
the os is Distributor ID: Raspbian Description: Raspbian GNU/Linux 9.11 (stretch) Release: 9.11 Codename: stretch
^[[96mUpdating packages ...^[[90m
Hit:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease Get:2 http://archive.raspberrypi.org/debian stretch InRelease [25.4 kB] Hit:3 https://d$
apt-get update  completed ok

sdetweil

@efevee said in restart loop without error:

stretch

stretch is pretty old now… lots of updates

efevee

C’mon… Buster is only for a few months… :)
Nevertheless upgrade at 6%, will let you know how it looks like after it finishes.

sdetweil

@efevee ok, thx…

efevee

Upgraded to buster, took ages, but seems OK, already had two restarts to check if works constantly. Made sd card dump just in case…

pi@magicpi:~ $ pm2 status
┌─────┬────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id  │ name   │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├─────┼────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 1   │ mm     │ N/A         │ N/A     │ fork    │ 1541     │ 15h    │ 89   │ online    │ 0%       │ 1.4mb    │ pi       │ disabled │
│ 0   │ pir    │ N/A         │ N/A     │ fork    │ 1515     │ 15h    │ 0    │ online    │ 0%       │ 1.5mb    │ pi       │ disabled │
└─────┴────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘

wonder for how long will it work…

sdetweil

@efevee woohoo!.. thanks for the update…

keep an eye on the restarts
│ 1 │ mm │ N/A │ N/A │ fork │ 1541 │ 15h │ 89

efevee

think, yesterday after update was 87, two were done on purpose by me to check if it will bring up mm.

number is so high as I used pm2 resurrect to bring pir & mm sessions back from “old” stretch set-up as I have also upgraded pm2 itself…

will report anything suspicious :)