Read the statement by Michael Teeuw here.
LCD not Displaying
-
I am new to Magic mirror, i am building magic mirror from old laptop LCD 15.6" panel
after connecting the screen I see the LCD is lit as follows & not replicating the screen
White banding all around & no display content seen
I have the following Panel:
http://www.panelook.com/modeldetail.php?id=2160&fbclid=IwAR3Fdh0ZYUOI4p07lju-r3EklabRbrEYNVNUFzieq2QfYiKVSOZ1FGWCQTEMy LCD Controller board : Model No: hdvx9-as v4.2 (https://www.kazmielecom.com/2018/10/12/hdvx9-as-v59-software-free-download.html)
I have set the jumper to 3.3 V (As per panel & Board datasheet)
I have set resolution setting to 1366x768
Laptop Old LCD was working fine in the laptop till i disassembled it. (So i dont think LCD has an issue)
https://imgur.com/FxOzW9s
Please help me to resolve the issue.
Thanks in advance. -
-
Do you have the LVDS cable? A 6bit-1CH LVDS has different pin population that for instance a 8bit-2CH. Vcc and GND are at different locations and a wrong cable could potentially fry your LCD.
I am on my phone without my glasses, so I can’t see very well but on the imgur picture it looks like a 8bit-2CH cable while a 1366 resolution seems more like 6bit-1CH (just a guess from my little experience with LCD panels, don’t take it as a fact).
Have you tried to hook it back up to the old laptop to see if it’s still working?
Also, have you flashed the right firmware for the controller board?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login