Read the statement by Michael Teeuw here.
MMM-NetworkScanner-loading...indefinitely
-
@jthirasilpa ok, after looking thru the code, I dont see the mac addresses in the modulename.js…
so, can u open a terminal window on the pi and do
sudo arp-scan -l -
@sdetweil Here is the scan result:
Interface: enp1s0, datalink type: EN10MB (Ethernet) Starting arp-scan 1.9 with 256 hosts (http://www.nta-monitor.com/tools/arp-scan/ ) 192.168.1.1 f4:f2:6d:9f:72:89 TP-LINK TECHNOLOGIES CO.,LTD. 192.168.1.15 c0:3f:d5:65:06:6f Elitegroup Computer Systems Co.,Ltd. 192.168.1.50 e0:2f:6d:62:b6:d5 Cisco Systems, Inc 192.168.1.52 00:15:65:70:6b:f9 XIAMEN YEALINK NETWORK TECHNOLOGY CO.,LT D 192.168.1.53 00:15:65:bb:a0:8d XIAMEN YEALINK NETWORK TECHNOLOGY CO.,LT D 192.168.1.101 7c:2f:80:6e:56:ff Gigaset Communications GmbH 192.168.1.103 78:3e:53:40:9b:97 BSkyB Ltd 192.168.1.105 d8:cb:8a:71:a5:f5 Micro-Star INTL CO., LTD. 192.168.1.108 08:05:81:f5:8c:2e Roku, Inc. 192.168.1.109 10:62:e5:ac:b9:f7 Hewlett Packard 192.168.1.111 f0:1d:bc:8e:da:fa Microsoft Corporation 13 packets received by filter, 0 packets dropped by kernel Ending arp-scan 1.9: 256 hosts scanned in 4.391 seconds (58.30 hosts/sec). 11 re sponded -
@jthirasilpa change showUnknown: to true in config.js…
ip addresses 11, 17, and 70 are not known according to the arp scan
-
Hi Sam - they were not at the time of the scan, but they have been picked up in console messages previously. For example:
Shouldn’t that then show up on the Mirror?
-
@jthirasilpa not my module. Trying to help
-
@sdetweil Hi Sam - I appreciate your assistance. I am actually asking that question legitimately out of ignorance. I assume that if it appears in the console as follows:
Object { ipAddress: “192.168.1.11”, name: “Champagne”, icon: “server”, color: “#ffffff”, showOffline: true, online: true }then it would be show up in the Mirror, but maybe there are several steps in between…
In any case - thanks for your help.
-
@jthirasilpa it matches the IP address with the scanned Mac addresses.
If not in the Mac addresses it is not shown.In debug mode I get a big blast of the Mac address info displayed every time there is a scan
-
@sdetweil OK - do not have access to machine now, but will have a look later. Thanks.
-
@sdetweil
This is one of the devices from the config.js{ ipAddress: "192.168.1.11", name: "Champagne", icon: "server"} MMM-NetworkScanner received a notification: IP_ADDRESS Object { ipAddress: "192.168.1.11", name: "Champagne", icon: "server", color: "#ffffff", showOffline: true, online: true }This is from the console:
MMM-NetworkScanner.js:70:30 MMM-NetworkScanner IP_ADDRESS device: Array [ "Champagne", true ] MMM-NetworkScanner.js:80:31 MMM-NetworkScanner is updating device status. Array [ "Champagne", true ] MMM-NetworkScanner.js:284:31 MMM-NetworkScanner Champagne is onlineStrangely when I run sudo arp -scan -l, this device doesn’t appear. But doesn’t the information from the console suggest that it should be displayed?
Conversely, the arp scan does find 192.168.1.15, but console displays this:
MMM-NetworkScanner received a notification: IP_ADDRESS Object { ipAddress: "192.168.1.15", name: "Millie", icon: "server", color: "#ffffff", showOffline: true, online: false } MMM-NetworkScanner.js:70:30 MMM-NetworkScanner IP_ADDRESS device: Array [ "Millie", false ] MMM-NetworkScanner.js:80:31 MMM-NetworkScanner is updating device status. Array [ "Millie", false ]I would think that one of these would be displayed on the MM.
Any further thoughts? Thanks.
-
@jthirasilpa are those wireless? The arp scan only did Ethernet connected devices
