Read the statement by Michael Teeuw here.
LVDS controller cable
-
Hello, thank you to accept me in this forum,
I start to work with LDSV controller but i have an issue.
I bought a controller PCB800099 V0.9 who are normally compatible with screen HSD100IFW1 - A0 but my screen are little different HSD100IFW1 - F01
The only difference i found it’s about two pins on connector. (28 and 30).
Do you knwo if it’s possible to modify the cable for work ?A-0
F01
Cable shema
Thank you for your help.
-
I am not really sure how correct I am but it looks to me that those pins are for the LED backlight of the LCD panel. As far as I can see the LCD controller board doesn’t have an in-build LED driver. VDD and V(LED_EN) are both 3.3V. Maybe combine those pins with pin 2 and 3 and see what happens.
Of course there is always a risk of frying your panel so I am not taking any responsibility! It’s just a suggestion of what you could try to do. Please report once you got it to work.
-
@MadScientist I tried but screen just flickering (screen flash blank)
I have a good power 4A, not easy , but it’s better before there was nothing :) -
@Daiki Do you have an extra LED driver for LCDs? You could take the connections from there. Kinda like in this picture:
-
Yes i have on the controller it’s use with 5V :/
on the picture below the power supply for led are connected on item 9
-
Maybe try a MOSFET to get 3.3V. However, I am not very confident that would work. I don’t understand why it didn’t work when you combined the pins 28 and 30 with 2 and 3.
What happens when you only put 3.3V on pin 30, leaving 28 (VDD) disconnected? And what happens if you reverse it (28 = 3.3V, 30 = 0V)?Maybe somebody else with more experiences with LCDs could join the conversation?
-
hello sorry for my late answer, i think i will leave it , put alll in a bag and put in trash , too much problem for a small thing.
Thank you to help me ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login