Read the statement by Michael Teeuw here.
MMM-NLDepartureTimes - Shows departure times of all line numbers grouped by destination of a group of stops.
-
Hello,
I’ve created a second module called MMM-NLDepartureTimes. This module shows the departure time at hubs and or group of stops where the departure time is grouped by destination in the Netherlands. Ideal if you use a hub that has multiple lines to your destination.
Here you see the hub Leidschenveen with the departures time of light-rail 3 and 4, Metro E, and street car 19. You can directly see when a light-rail or metro to Den Haag, or the street car to Leidschendam leaves.
Configuration opions
You can configure of which stops a hub exists and which lines to group on wich order.A hub is what you define as a hub. You select the stops in an area you want to use and give it a name. In this example line 3,4 to Den Haag, line 3,4 to Zoetermeer, line E to Den Haag, and line E to Rotterdam are 4 stops on different locations.
The destination is also what you want. You can give the destination a name you like and select the lines that you want to see there. Here the stop for line 3,4 and the stop for line E to Den Haag are grouped. Even though all 3 lines have a different end point, they have a stop around Den Haag Centraal. Line E to Slinge is grouped in Rotterdam alone.
I think I managed to write down how to find your proper codes called TPCs. Configuration is very quirky because the data supplied is raw and extended.
Any feedback is welcome!
Cheers,
George
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login