Read the statement by Michael Teeuw here.
Wich controller board for my lcd screen?
-
Hello!
Dus anyone know Which controller Board to buy for my display?
I got my display out of my old Sony PCG-5J5M laptop.
Regards!
-
This is the back of the display I took Out Of My Old Sony laptop:
https://www.dropbox.com/s/rvazpvuf0ejlf3j/IMG_20200629_114035.jpg?dl=0
-
Here is the datasheet of your LCD panel. It’s a single channel 6-bit LCD which runs at 3.3V.
That means you can use any universal LCD controller board with LVDS interface. Back when I build my mirror I bought the V56 boards. The T53.03 is a newer version I think. The advantage is that you can flash the firmware via USB and it has a TV tuner. The disadvantage is that it’s not powering back on after it went into standby mode (- can be solved with a relay if wanted).
If you want it super simple and VGA is enough for you, you can go with a MT561-B. Those things are tiny and dirt cheap.
-
Thank you!
I would like a controller board with HDMI.
is this one fine:
It is t53.03.
-
"
The disadvantage is that it’s not powering back on after it went into standby mode (- can be solved with a relay if wanted).
"🤔, this is not fine either…
So Maybe there is an alternative? Or I have to buy a vga tot HDMI convertor 🤔
-
The board you’ve linked is correct.
A VGA to HDMI will work just fine. A VGA board with inverter, cables, and keypad should be around 3.50€ to 5€ and a VGA-HDMI adapter around 2.50€
-
Thanks Again!
I’ll go for the MT561-B
Will This one be fine?:
How will the LCD display get its power? My LCD display has a two pole power plug 🤔
-
That controller board is for a AUO B156XW02 panel. It’s also 1-CH 6-bit but with LED backlight. In principle it should work but it runs a higher resolution.(*) It’s best to order these boards specifically for the panel you have.
I was referring to this kind of controller board plus VGA-HDMI adapter (only an example!). You configure those boards via jumpers.
- That shouldn’t be a problem. You just have to configure the resolution within your operating system yourself.
-
I’ll go for the aliexpress controller board. Only thing that worries me is that I don’t see a power cable. How will my display get power?
And where does the controller board itself get its power from?
Do I have to buy additional power cables at the local electronic hardware store?
-
You see the red 6-pin connector? You apply 5V to them.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login