Read the statement by Michael Teeuw here.
First Build.
-
Finished my first Magic Mirror build this weekend.
My build:Raspberry Pi 3B
Older Dell monitor that I had in storage
Ikea Edsbruk 19 ¾x27 ½ frameI built a support frame using 1x2inch boards and attached that to the back of the Ikea frame with 1 inch corner brackets
I initially tried to use mirror film on the Ikea plexiglass but that was a giant fail so I ended up buying a two way mirror plexiglass sheet from Canal Plastics in NYC.
Initial programming
Frame-- I cleaned up the wiring with some zip ties and brackets before securing the support frame to the Ikea frame permanently.
Final setup… with dog.
On the wall.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login