MMM-bergfex not working

[sdetweil]

@MajorC of course

[MajorC]

sorry, I am totaly new to this world, my first Raspberry project.

pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ npm install async --save
npm WARN MMM-bergfex@ license should be a valid SPDX license expression

+ async@3.2.0
added 1 package from 1 contributor and audited 66 packages in 2.709s

2 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ npm install sys -- save
npm WARN MMM-bergfex@ license should be a valid SPDX license expression

+ sys@0.0.1
+ save@2.4.0
added 13 packages from 11 contributors and audited 79 packages in 8.763s

2 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $

[sdetweil]

@MajorC and then start mm

[MajorC]

well, I have my mirror back, including Bergfex Snow Report. At the moment there is only “loading…” visible.

I will double check my config.

Maybe you can include the help to the git? Would be nice to have it working as smooth as the rest in this wonderful project.

[sdetweil]

@MajorC he hasn’t updated in 2 years… so unlikely

[MajorC]

And it is working.

This is important:

This is an array with strings of the skiareas to display. String must exactly match the name on http://www.bergfex.at/oesterreich/schneewerte/

[sdetweil]

@MajorC yes, precise config is required in each module. some don’t document well…

[MajorC]

Thanks for your very fast help. Maybe someone will rewrite this MMM. Winter is coming!

[Suboshi]

Hi ,

sorry for bringing this up again. I also have the bergfex “loading…” issue. However, in the logs I can see the values are retrieved. They just don’t show in the mirror:

0|mm     | 83 snow reports from bergfex.at retrieved.
0|mm     | [2020-11-12 21:40:29.367] [LOG]    searching for Koralpe
0|mm     | [2020-11-12 21:40:29.369] [LOG]    searching for Hintertuxer Gletscher / Hintertux
0|mm     | [2020-11-12 21:40:29.370] [LOG]    searching for Ischgl
0|mm     | [2020-11-12 21:40:29.373] [LOG]    searching for Obergurgl - Hochgurgl
0|mm     | [2020-11-12 21:40:29.375] [LOG]    searching for Seefeld/Rosshütte
0|mm     | [2020-11-12 21:40:29.376] [LOG]    searching for Sölden
0|mm     | [2020-11-12 21:40:29.377] [LOG]    searching for Stubaier Gletscher / Stubaital
0|mm     | [2020-11-12 21:40:29.377] [LOG]    
0|mm     | [
0|mm     |   null,
0|mm     |   {
0|mm     |     skiarea: 'Hintertuxer Gletscher / Hintertux',
0|mm     |     tal: '-',
0|mm     |     berg: '135 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   {
0|mm     |     skiarea: 'Ischgl',
0|mm     |     tal: '-',
0|mm     |     berg: '20 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   {
0|mm     |     skiarea: 'Obergurgl - Hochgurgl',
0|mm     |     tal: '-',
0|mm     |     berg: '75 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   null,
0|mm     |   {
0|mm     |     skiarea: 'Sölden',
0|mm     |     tal: '19 cm',
0|mm     |     berg: '72 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   {
0|mm     |     skiarea: 'Stubaier Gletscher / Stubaital',
0|mm     |     tal: '35 cm',
0|mm     |     berg: '110 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   }
0|mm     | ]

So the names of the resorts seem to be correct.
Any ideas on this one?

thanks
Chris

[Suboshi]

Argh… just 2 minutes after posting I found the issue:

I had 2 values “Koralpe” and “Seefeld/Rosshütte”, which were displayed in the log as NULL. Removing these entries made bergfex work…

Again, it was a typo ;)

thanks
Chris