Activating HTTPS causes black screen

sdetweil

@karsten13 the changelog says it should work

nzrunner

@sdetweil said in Activating HTTPS causes black screen:

@karsten13 the changelog says it should work

I had read the Changelog as well, and noticed the following entry: -

Add HTTPS support and update config.js.sample

@karsten13 I am happy to wait for the v2.12.0 release. 1st July isn’t that far away ;-)

sdetweil

@nzrunner July 1, every 3 months a new release

rafhtl

@sdetweil
Hi Sam
just wanted to tell you that I am using devel and https works fine
BUT
it took me some time to understand this:
in js/electron.js
in line
18
should be
app.commandLine.appendSwitch(“autoplay-policy”, ‘true’);
app.commandLine.appendSwitch(“no-user-gesture-required”, ‘true’);
app.commandLine.appendSwitch(“disable-site-isolation-trials”, ‘true’);
app.commandLine.appendSwitch(“ignore-certificate-errors”, ‘true’);
app.commandLine.appendSwitch(‘allow-insecure-localhost’, ‘true’);

and ofcourse in config also add tls: true
let me know if this turns out to be correct
as soon as I did this it started working
thanks
r

br4tt3

@rafhtl - could you elaborate on the part of the tls: true in the config file? I cant seem to find any reference to that specific config param. I added the changes that you mention in the electron.js file - with the same result as previously, pitch black screen as soon as i am running on https.

checking the “output” from a remote connection (e.g remote control module) it works over htpps - but for the physical screen its pitch black!

thanks!

karsten13

There are 2 use cases for which was https implemented:

serveronly
clientonly

This use case with output from the pi on the screen and accessing the mm url’s with https was never implemented.

The above hack from @rafhtl seems not to work with the current electron version.

You can get it working if you put the following lines under the line with mainWindow = new BrowserWindow(electronOptions); in js/electron.js:

mainWindow.webContents.session.setCertificateVerifyProc((request, callback) => {
    callback(0); //this means trust this domain
})

And electron must use https so you have to change the prefix in the following lines to https in the else section or put tls: true, in the config.js.

I’m interested in this usecase because I see nothing what could be protected with https. Everybody who knows your url e.g. https://192.168.0.33:8080/ has full access to your config calling https://192.168.0.33:8080/config/ and can see all your secrets, so I would never run MM in public without protection.