A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
OrangePi Zero 2 installation issues
-
@michelw ok, you are running the desktop graphical version of the OS, right? you must , browser draws in graphics mode.
the number next to uptim ein the pm2 status is the restart count…
so, pm2 stop all
pm2 flush
pm2 start 0wait 15 seconds
then pm2 logs --lines=100
-
@michelw mm installs and runs on other aarch64 systems… , ubuntu 64 on arm, Jetson Nano and Raspi with the 64bit beta OS…
-
@sdetweil said in OrangePi Zero 2 installation issues:
@michelw ok, you are running the desktop graphical version of the OS, right? you must , browser draws in graphics mode.
Dang, that might be the issue…
I’ve installed this image now: https://redirect.armbian.com/orangepizero2/Buster_legacy then. That one should have desktop. https://www.armbian.com/orange-pi-zero-2/Ran your script again, but now it has issues with the missing chromium browser…
touch: cannot touch '/etc/chromium-browser/customizations/01-disable-update-check': No such file or directory tee: /etc/chromium-browser/customizations/01-disable-update-check: No such file or directoryinstall starting - Fri Dec 10 21:09:23 CET 2021 installing on aarch64 processor system the os is Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster Installing helper tools ... Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.6). curl is already the newest version (7.64.0-4+deb10u2). git is already the newest version (1:2.20.1-2+deb10u3). pv is already the newest version (1.6.6-1). unzip is already the newest version (6.0-23+deb10u2). wget is already the newest version (1.20.1-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Updating packages ... Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 http://deb.debian.org/debian buster-backports InRelease Hit:5 http://armbian.12z.eu/apt buster InRelease Reading package lists... apt-get update completed ok apt-get upgrade started apt upgrade result =rc=0 Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Check current Node installation ... Node.js is not installed. Installing Node.js ... Node release info = ## Installing the NodeSource Node.js 14.x repo... ## Populating apt-get cache... + apt-get update Hit:1 http://deb.debian.org/debian buster InRelease Hit:2 http://deb.debian.org/debian buster-updates InRelease Hit:3 http://security.debian.org buster/updates InRelease Hit:4 http://deb.debian.org/debian buster-backports InRelease Hit:5 http://armbian.12z.eu/apt buster InRelease Reading package lists... ## Confirming "buster" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_14.x/dists/buster/Release' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor | tee /usr/share/keyrings/nodesource.gpg >/dev/null ## Creating apt sources list file for the NodeSource Node.js 14.x repo... + echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_14.x buster main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_14.x buster main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 http://deb.debian.org/debian buster-backports InRelease Get:5 https://deb.nodesource.com/node_14.x buster InRelease [4,584 B] Hit:6 http://xogium.performanceservers.nl/apt buster InRelease Get:7 https://deb.nodesource.com/node_14.x buster/main armhf Packages [779 B] Get:8 https://deb.nodesource.com/node_14.x buster/main arm64 Packages [770 B] Fetched 6,133 B in 3s (1,867 B/s) Reading package lists... ## Run `sudo apt-get install -y nodejs` to install Node.js 14.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo tee /usr/share/keyrings/yarnkey.gpg >/dev/null echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn v14.18.2 Node.js installation Done! version=v14.18.2 Check current NPM installation ... NPM currently installed. Checking version number. Minimum npm version: V6.0.0 Installed npm version: V6.14.15 No npm upgrade necessary. Cloning MagicMirror ... Cloning MagicMirror Done! Installing dependencies ... > electron@13.6.3 postinstall /home/michel/MagicMirror/node_modules/electron > node install.js > magicmirror@2.17.1 install /home/michel/MagicMirror > echo "Installing vendor files ... " && cd vendor && npm install --loglevel=error Installing vendor files ... > @fortawesome/fontawesome-free@5.15.4 postinstall /home/michel/MagicMirror/vendor/node_modules/@fortawesome/fontawesome-free > node attribution.js Font Awesome Free 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license/free (Icons: CC BY 4.0, Fonts: SIL OFL 1.1, Code: MIT License) added 9 packages from 17 contributors and audited 9 packages in 10.954s found 0 vulnerabilities > magicmirror@2.17.1 postinstall /home/michel/MagicMirror > npm run install-fonts && echo "MagicMirror installation finished successfully! " > magicmirror@2.17.1 install-fonts /home/michel/MagicMirror > echo "Installing fonts ... " && cd fonts && npm install --loglevel=error Installing fonts ... added 1 package from 1 contributor and audited 1 package in 2.736s found 0 vulnerabilities MagicMirror installation finished successfully! added 292 packages from 243 contributors and audited 923 packages in 174.077s 19 packages are looking for funding run `npm fund` for details found 0 vulnerabilities Dependencies installation Done! fixing sandbox permissions setting up initial config.js Check plymouth installation ... plymouth is not installed. install and setup pm2 pm2 not installed, installing pm2 install result npm WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. /usr/bin/pm2 -> /usr/lib/node_modules/pm2/bin/pm2 /usr/bin/pm2-docker -> /usr/lib/node_modules/pm2/bin/pm2-docker /usr/bin/pm2-dev -> /usr/lib/node_modules/pm2/bin/pm2-dev /usr/bin/pm2-runtime -> /usr/lib/node_modules/pm2/bin/pm2-runtime npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/pm2/node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"}) + pm2@5.1.2 added 180 packages from 200 contributors in 48.379s get the pm2 platform specific startup command startup command = sudo env PATH=$PATH:/usr/bin:/bin /usr/lib/node_modules/pm2/bin/pm2 startup systemd -u michel --hp /home/michel ------------- __/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____ _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___ _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__ _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___ _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____ _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________ _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________ _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_ _\///______________\///______________\///__\///////////////__ Runtime Edition PM2 is a Production Process Manager for Node.js applications with a built-in Load Balancer. Start and Daemonize any application: $ pm2 start app.js Load Balance 4 instances of api.js: $ pm2 start api.js -i 4 Monitor in production: $ pm2 monitor Make pm2 auto-boot at server restart: $ pm2 startup To go further checkout: http://pm2.io/ ------------- [PM2] Init System found: systemd Platform systemd Template [Unit] Description=PM2 process manager Documentation=https://pm2.keymetrics.io/ After=network.target [Service] Type=forking User=michel LimitNOFILE=infinity LimitNPROC=infinity LimitCORE=infinity Environment=PATH=$PATH:/usr/bin:/bin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin Environment=PM2_HOME=/home/michel/.pm2 PIDFile=/home/michel/.pm2/pm2.pid Restart=on-failure ExecStart=/usr/lib/node_modules/pm2/bin/pm2 resurrect ExecReload=/usr/lib/node_modules/pm2/bin/pm2 reload all ExecStop=/usr/lib/node_modules/pm2/bin/pm2 kill [Install] WantedBy=multi-user.target Target path /etc/systemd/system/pm2-michel.service Command list [ 'systemctl enable pm2-michel' ] [PM2] Writing init configuration in /etc/systemd/system/pm2-michel.service [PM2] Making script booting at startup... [PM2] [-] Executing: systemctl enable pm2-michel... [PM2] [v] Command successfully executed. +---------------------------------------+ [PM2] Freeze a process list on reboot via: $ pm2 save [PM2] Remove init script via: $ pm2 unstartup systemd pm2 startup command done configure the pm2 config file for MagicMirror the user is not pi change mm.sh save copy of mm.sh change relative home path to hard coded path change pm2_MagicMirror.json now using this config file pm2_MagicMirror_new.json start MagicMirror via pm2 now save MagicMirror pm2 config now stop MagicMirror via pm2 now We're ready! Run pm2 start MagicMirror from the ~/MagicMirror directory to start your MagicMirror. install completed - Fri Dec 10 21:15:14 CET 2021I really need this to run on the orange pi zero 2 as I have no other option available. :(
-
@michelw that chrome issue is nothing. try to disable the click to update, if u have no mouse! duh.
but won’t affect you
-
@michelw show the pm2 logs --lines=50 output
should have been ok…
-
@sdetweil said in OrangePi Zero 2 installation issues:
pm2 logs --lines=50 output
michel@magicmirror:~/MagicMirror$ pm2 logs --lines=50 [TAILING] Tailing last 50 lines for [all] processes (change the value with --lines option) /home/michel/.pm2/pm2.log last 50 lines: PM2 | 2021-12-10T21:25:51: PM2 log: Stopping app:MagicMirror id:0 PM2 | 2021-12-10T21:25:51: PM2 log: App [MagicMirror:0] exited with code [0] via signal [SIGINT] PM2 | 2021-12-10T21:25:51: PM2 log: pid=19681 msg=process killed PM2 | 2021-12-10T21:25:51: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:25:51: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:25:56: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:25:56: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:25:56: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:00: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:00: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:00: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:05: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:05: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:05: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:09: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:09: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:09: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:14: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:14: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:14: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:18: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:18: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:18: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:23: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:23: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:23: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:27: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:27: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:27: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:32: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:32: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:32: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:36: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:36: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:36: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:41: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:41: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:41: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:46: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:46: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:46: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:50: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:50: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:50: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:55: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:55: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:55: PM2 log: App [MagicMirror:0] online PM2 | 2021-12-10T21:26:59: PM2 log: App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | 2021-12-10T21:26:59: PM2 log: App [MagicMirror:0] starting in -fork mode- PM2 | 2021-12-10T21:26:59: PM2 log: App [MagicMirror:0] online /home/michel/.pm2/logs/MagicMirror-error.log last 50 lines: 0|MagicMir | npm ERR! A complete log of this run can be found in: 0|MagicMir | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_26_41_486Z-debug.log 0|MagicMir | The futex facility returned an unexpected error code. 0|MagicMir | /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT 0|MagicMir | npm ERR! code ELIFECYCLE 0|MagicMir | npm ERR! errno 1 0|MagicMir | npm ERR! magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 0|MagicMir | npm ERR! Exit status 1 0|MagicMir | npm ERR! 0|MagicMir | npm ERR! Failed at the magicmirror@2.17.1 start script. 0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|MagicMir | 0|MagicMir | npm ERR! A complete log of this run can be found in: 0|MagicMir | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_26_46_011Z-debug.log 0|MagicMir | The futex facility returned an unexpected error code. 0|MagicMir | /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT 0|MagicMir | npm ERR! code ELIFECYCLE 0|MagicMir | npm ERR! errno 1 0|MagicMir | npm ERR! magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 0|MagicMir | npm ERR! Exit status 1 0|MagicMir | npm ERR! 0|MagicMir | npm ERR! Failed at the magicmirror@2.17.1 start script. 0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|MagicMir | 0|MagicMir | npm ERR! A complete log of this run can be found in: 0|MagicMir | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_26_50_521Z-debug.log 0|MagicMir | The futex facility returned an unexpected error code. 0|MagicMir | /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT 0|MagicMir | npm ERR! code ELIFECYCLE 0|MagicMir | npm ERR! errno 1 0|MagicMir | npm ERR! magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 0|MagicMir | npm ERR! Exit status 1 0|MagicMir | npm ERR! 0|MagicMir | npm ERR! Failed at the magicmirror@2.17.1 start script. 0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|MagicMir | 0|MagicMir | npm ERR! A complete log of this run can be found in: 0|MagicMir | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_26_54_958Z-debug.log 0|MagicMir | The futex facility returned an unexpected error code. 0|MagicMir | /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT 0|MagicMir | npm ERR! code ELIFECYCLE 0|MagicMir | npm ERR! errno 1 0|MagicMir | npm ERR! magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 0|MagicMir | npm ERR! Exit status 1 0|MagicMir | npm ERR! 0|MagicMir | npm ERR! Failed at the magicmirror@2.17.1 start script. 0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|MagicMir | 0|MagicMir | npm ERR! A complete log of this run can be found in: 0|MagicMir | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_26_59_382Z-debug.log /home/michel/.pm2/logs/MagicMirror-out.log last 50 lines: 0|MagicMir | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js 0|MagicMir | 0|MagicMir | [10.12.2021 21:26.58.491] [LOG] Starting MagicMirror: v2.17.1 0|MagicMir | [10.12.2021 21:26.58.507] [LOG] Loading config ... 0|MagicMir | [10.12.2021 21:26.58.521] [LOG] Loading module helpers ... 0|MagicMir | [10.12.2021 21:26.58.526] [LOG] No helper found for module: alert. 0|MagicMir | [10.12.2021 21:26.58.564] [LOG] Initializing new module helper ... 0|MagicMir | [10.12.2021 21:26.58.567] [LOG] Module helper loaded: updatenotification 0|MagicMir | [10.12.2021 21:26.58.570] [LOG] No helper found for module: clock. 0|MagicMir | [10.12.2021 21:26.58.905] [LOG] Initializing new module helper ... 0|MagicMir | [10.12.2021 21:26.58.907] [LOG] Module helper loaded: calendar 0|MagicMir | [10.12.2021 21:26.58.910] [LOG] No helper found for module: compliments. 0|MagicMir | [10.12.2021 21:26.58.912] [LOG] No helper found for module: weather. 0|MagicMir | [10.12.2021 21:26.58.960] [LOG] Initializing new module helper ... 0|MagicMir | [10.12.2021 21:26.58.962] [LOG] Module helper loaded: newsfeed 0|MagicMir | [10.12.2021 21:26.58.963] [LOG] All module helpers loaded. 0|MagicMir | [10.12.2021 21:26.59.187] [LOG] Starting server on port 8080 ... 0|MagicMir | [10.12.2021 21:26.59.221] [LOG] Server started ... 0|MagicMir | [10.12.2021 21:26.59.224] [LOG] Connecting socket for: updatenotification 0|MagicMir | [10.12.2021 21:26.59.227] [LOG] Connecting socket for: calendar 0|MagicMir | [10.12.2021 21:26.59.229] [LOG] Starting node helper for: calendar 0|MagicMir | [10.12.2021 21:26.59.231] [LOG] Connecting socket for: newsfeed 0|MagicMir | [10.12.2021 21:26.59.233] [LOG] Starting node helper for: newsfeed 0|MagicMir | [10.12.2021 21:26.59.234] [LOG] Sockets connected & modules started ... 0|MagicMir | 0|MagicMir | > magicmirror@2.17.1 start /home/michel/MagicMirror 0|MagicMir | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js 0|MagicMir | 0|MagicMir | [10.12.2021 21:27.03.032] [LOG] Starting MagicMirror: v2.17.1 0|MagicMir | [10.12.2021 21:27.03.053] [LOG] Loading config ... 0|MagicMir | [10.12.2021 21:27.03.070] [LOG] Loading module helpers ... 0|MagicMir | [10.12.2021 21:27.03.076] [LOG] No helper found for module: alert. 0|MagicMir | [10.12.2021 21:27.03.121] [LOG] Initializing new module helper ... 0|MagicMir | [10.12.2021 21:27.03.125] [LOG] Module helper loaded: updatenotification 0|MagicMir | [10.12.2021 21:27.03.129] [LOG] No helper found for module: clock. 0|MagicMir | [10.12.2021 21:27.03.543] [LOG] Initializing new module helper ... 0|MagicMir | [10.12.2021 21:27.03.546] [LOG] Module helper loaded: calendar 0|MagicMir | [10.12.2021 21:27.03.549] [LOG] No helper found for module: compliments. 0|MagicMir | [10.12.2021 21:27.03.552] [LOG] No helper found for module: weather. 0|MagicMir | [10.12.2021 21:27.03.609] [LOG] Initializing new module helper ... 0|MagicMir | [10.12.2021 21:27.03.611] [LOG] Module helper loaded: newsfeed 0|MagicMir | [10.12.2021 21:27.03.613] [LOG] All module helpers loaded. 0|MagicMir | [10.12.2021 21:27.03.893] [LOG] Starting server on port 8080 ... 0|MagicMir | [10.12.2021 21:27.03.939] [LOG] Server started ... 0|MagicMir | [10.12.2021 21:27.03.943] [LOG] Connecting socket for: updatenotification 0|MagicMir | [10.12.2021 21:27.03.947] [LOG] Connecting socket for: calendar 0|MagicMir | [10.12.2021 21:27.03.950] [LOG] Starting node helper for: calendar 0|MagicMir | [10.12.2021 21:27.03.953] [LOG] Connecting socket for: newsfeed 0|MagicMir | [10.12.2021 21:27.03.955] [LOG] Starting node helper for: newsfeed 0|MagicMir | [10.12.2021 21:27.03.958] [LOG] Sockets connected & modules started ... 0|MagicMirror | The futex facility returned an unexpected error code. 0|MagicMirror | /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT 0|MagicMirror | npm 0|MagicMirror | ERR! code ELIFECYCLE 0|MagicMirror | npm ERR! 0|MagicMirror | errno 1 0|MagicMirror | npm ERR! 0|MagicMirror | magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 0|MagicMirror | npm ERR! Exit status 1 0|MagicMirror | npm ERR! 0|MagicMirror | npm ERR! Failed at the magicmirror@2.17.1 start script. 0|MagicMirror | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|MagicMirror | npm ERR! A complete log of this run can be found in: 0|MagicMirror | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_27_04_227Z-debug.log PM2 | App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | App [MagicMirror:0] starting in -fork mode- PM2 | App [MagicMirror:0] online 0|MagicMirror | > magicmirror@2.17.1 start /home/michel/MagicMirror 0|MagicMirror | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js 0|MagicMirror | [10.12.2021 21:27.07.756] [LOG] 0|MagicMirror | Starting MagicMirror: v2.17.1 0|MagicMirror | [10.12.2021 21:27.07.774] [LOG] 0|MagicMirror | Loading config ... 0|MagicMirror | [10.12.2021 21:27.07.790] [LOG] 0|MagicMirror | Loading module helpers ... 0|MagicMirror | [10.12.2021 21:27.07.796] [LOG] 0|MagicMirror | No helper found for module: alert. 0|MagicMirror | [10.12.2021 21:27.07.835] [LOG] 0|MagicMirror | Initializing new module helper ... 0|MagicMirror | [10.12.2021 21:27.07.839] [LOG] 0|MagicMirror | Module helper loaded: updatenotification 0|MagicMirror | [10.12.2021 21:27.07.843] [LOG] No helper found for module: clock. 0|MagicMirror | [10.12.2021 21:27.08.182] [LOG] 0|MagicMirror | Initializing new module helper ... 0|MagicMirror | [10.12.2021 21:27.08.184] [LOG] 0|MagicMirror | Module helper loaded: calendar 0|MagicMirror | [10.12.2021 21:27.08.188] [LOG] No helper found for module: compliments. 0|MagicMirror | [10.12.2021 21:27.08.191] [LOG] 0|MagicMirror | No helper found for module: weather. 0|MagicMirror | [10.12.2021 21:27.08.241] [LOG] 0|MagicMirror | Initializing new module helper ... 0|MagicMirror | [10.12.2021 21:27.08.243] [LOG] 0|MagicMirror | Module helper loaded: newsfeed 0|MagicMirror | [10.12.2021 21:27.08.245] [LOG] All module helpers loaded. 0|MagicMirror | [10.12.2021 21:27.08.471] [LOG] 0|MagicMirror | Starting server on port 8080 ... 0|MagicMirror | [10.12.2021 21:27.08.505] [LOG] 0|MagicMirror | Server started ... 0|MagicMirror | [10.12.2021 21:27.08.508] [LOG] Connecting socket for: updatenotification 0|MagicMirror | [10.12.2021 21:27.08.512] [LOG] 0|MagicMirror | Connecting socket for: calendar 0|MagicMirror | [10.12.2021 21:27.08.515] [LOG] Starting node helper for: calendar 0|MagicMirror | [10.12.2021 21:27.08.518] [LOG] Connecting socket for: newsfeed 0|MagicMirror | [10.12.2021 21:27.08.520] [LOG] Starting node helper for: newsfeed 0|MagicMirror | [10.12.2021 21:27.08.522] [LOG] Sockets connected & modules started ... 0|MagicMirror | The futex facility returned an unexpected error code. 0|MagicMirror | /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGABRT 0|MagicMirror | npm 0|MagicMirror | ERR! code ELIFECYCLE 0|MagicMirror | npm ERR! 0|MagicMirror | errno 1 0|MagicMirror | npm ERR! 0|MagicMirror | magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 0|MagicMirror | npm ERR! Exit status 1 0|MagicMirror | npm ERR! 0|MagicMirror | npm ERR! Failed at the magicmirror@2.17.1 start script. 0|MagicMirror | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|MagicMirror | npm ERR! A complete log of this run can be found in: 0|MagicMirror | npm ERR! /home/michel/.npm/_logs/2021-12-10T20_27_08_775Z-debug.log PM2 | App [MagicMirror:0] exited with code [1] via signal [SIGINT] PM2 | App [MagicMirror:0] starting in -fork mode- PM2 | App [MagicMirror:0] online 0|MagicMirror | > magicmirror@2.17.1 start /home/michel/MagicMirror 0|MagicMirror | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js -
@michelw do
pm2 stop all export DISPLAY=:0 cd ~/MagicMirror npm start -
@michelw your xwindows might have a different numbering, so use that
-
@sdetweil said in OrangePi Zero 2 installation issues:
@michelw your xwindows might have a different numbering, so use that
Not sure what you mean. I am not a linux expert ;)
michel@magicmirror:~$ pm2 stop all [PM2] Applying action stopProcessId on app [all](ids: [ 0 ]) [PM2] [MagicMirror](0) ✓ ┌─────┬────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐ │ id │ name │ namespace │ version │ mode │ pid │ uptime │ ↺ │ status │ cpu │ mem │ user │ watching │ ├─────┼────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤ │ 0 │ MagicMirror │ default │ 2.17.1 │ fork │ 0 │ 0 │ 396 │ stopped │ 0% │ 0b │ michel │ disabled │ └─────┴────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘ michel@magicmirror:~$ export DISPLAY=:0 michel@magicmirror:~$ cd ~/MagicMirror michel@magicmirror:~/MagicMirror$ npm start > magicmirror@2.17.1 start /home/michel/MagicMirror > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js [10.12.2021 22:32.33.528] [LOG] Starting MagicMirror: v2.17.1 [10.12.2021 22:32.33.544] [LOG] Loading config ... [10.12.2021 22:32.33.558] [LOG] Loading module helpers ... [10.12.2021 22:32.33.563] [LOG] No helper found for module: alert. [10.12.2021 22:32.33.600] [LOG] Initializing new module helper ... [10.12.2021 22:32.33.603] [LOG] Module helper loaded: updatenotification [10.12.2021 22:32.33.606] [LOG] No helper found for module: clock. [10.12.2021 22:32.33.953] [LOG] Initializing new module helper ... [10.12.2021 22:32.33.955] [LOG] Module helper loaded: calendar [10.12.2021 22:32.33.958] [LOG] No helper found for module: compliments. [10.12.2021 22:32.33.960] [LOG] No helper found for module: weather. [10.12.2021 22:32.33.997] [LOG] Initializing new module helper ... [10.12.2021 22:32.33.999] [LOG] Module helper loaded: newsfeed [10.12.2021 22:32.34.001] [LOG] All module helpers loaded. [10.12.2021 22:32.34.223] [LOG] Starting server on port 8080 ... [10.12.2021 22:32.34.255] [LOG] Server started ... [10.12.2021 22:32.34.258] [LOG] Connecting socket for: updatenotification [10.12.2021 22:32.34.260] [LOG] Connecting socket for: calendar [10.12.2021 22:32.34.262] [LOG] Starting node helper for: calendar [10.12.2021 22:32.34.264] [LOG] Connecting socket for: newsfeed [10.12.2021 22:32.34.266] [LOG] Starting node helper for: newsfeed [10.12.2021 22:32.34.268] [LOG] Sockets connected & modules started ... /home/michel/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! magicmirror@2.17.1 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the magicmirror@2.17.1 start script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/michel/.npm/_logs/2021-12-10T21_32_34_516Z-debug.log michel@magicmirror:~/MagicMirror$Found this somewhere:
michel@magicmirror:~/MagicMirror$ ps -u $(id -u) -o pid= \ > | xargs -I PID -r cat /proc/PID/environ 2> /dev/null \ > | tr '\0' '\n' \ > | grep ^DISPLAY=: \ > | sort -u DISPLAY=:0 michel@magicmirror:~/MagicMirror$ -
@michelw xwindows has logical displays, using numbers for the ‘identifiet’
:0
etc…
some systems use different numbering
my zorin system uses :10
electron expects that I’d to be in the DISPLAY environment variable
so, open a terminal window and do
envshow the result
