Mirror starts not correct

mumblebaj

@thedk Have you upgraded your installation of Raspbian before updating the MM? You would also have to check every module folder that has a package.json and run npm install in the module folder. This has generally worked for most of the guys with the same issue as you have.

thedk

I didnt upgrade, i made an complete new installation cause of the issue i had before.

Since two days the mirror has no error and everything goes fine, dont know why. I made no upgrade or similar but will do this now. Maybe the issue is gone with that.

Thanks for your help.

mumblebaj

@thedk Please remember to check every module folder that has a package.json in it and run npm install in those folders as well.

thedk

I will do this.

Thanks.

thedk

@thedk said in Mirror starts not correct:

Jusat am month ago, it starts again, but with an other fault

0|mm  | > magicmirror@2.8.0 start /home/pi/MagicMirror
0|mm  | > sh run-start.sh
0|mm  | /home/pi/MagicMirror/node_modules/electron/dist/electron: relocation error: /home/pi/MagicMirror/node_modules/electron/dist/libffmpeg.so: symbol cnprantf, version GLIBC_2.4 not defined in file libc.so.6 with link time reference
0|mm  | npm
0|mm  |  ERR! file sh
0|mm  | npm ERR! code ELIFECYCLE
0|mm  | npm ERR! errno ENOENT
0|mm  | npm ERR! syscall spawn
0|mm  | npm
0|mm  |  ERR! magicmirror@2.8.0 start: `sh run-start.sh`
0|mm  | npm ERR! spawn ENOENT
0|mm  | npm
0|mm  |  ERR!
0|mm  | npm ERR! Failed at the magicmirror@2.8.0 start script.
0|mm  | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|mm  | npm ERR! A complete log of this run can be found in:
0|mm  | npm ERR!     /home/pi/.npm/_logs/2019-08-12T05_54_45_996Z-debug.log

I didnt changed anything, the error came from one day to the other an i just see the startscreen and the mirror wont start.

Could somebody help?

About a month ago and now again…
Everything is up to date but the issue is still there. Each day when the Mirror starts, the error comes second for second. A reboot solves the problem the mirror is runinng without problems.

Are there people where the Mirror is working für ober two months without issues? ^^

sdetweil

@thedk said in Mirror starts not correct:

About a month ago and now again…
Everything is up to date but the issue is still there. Each day when the Mirror starts, the error comes second for second. A reboot solves the problem the mirror is runinng without problems

sorry, I am not quite sure I am understanding…

you start the mirror (with pm2? or manually?), and it fails, with the above message

and then you reboot

and it runs ok…

and runs ok for how long?

i have 5 mirror instances, and all have been running for months without issues like this

did u put updates onto your operating system, or were some applied automatically?
libc.so.6 is a system library

thedk

The mirror starts every day automatically with pm2 throw a smart plug and the raspberry shuts down throw corn every day.
At the first start, he wont run with the log above, when i reboot the pi he is working without any problems till he shuts down at the end of the day.

All updates were made by me, none automatically.