Today the MIRASTAR glas came.
Had a look again at the Display. Its a glossy one. Always thought its a non glossy. Maybe i will change this.

Here ist the different between the glas:

MIRROPANE

Without light

MIRASTAR

Without light

The mirror starts every day automatically with pm2 throw a smart plug and the raspberry shuts down throw corn every day.
At the first start, he wont run with the log above, when i reboot the pi he is working without any problems till he shuts down at the end of the day.

All updates were made by me, none automatically.

@thedk said in Mirror starts not correct:

Jusat am month ago, it starts again, but with an other fault

0|mm  | > magicmirror@2.8.0 start /home/pi/MagicMirror
0|mm  | > sh run-start.sh
0|mm  | /home/pi/MagicMirror/node_modules/electron/dist/electron: relocation error: /home/pi/MagicMirror/node_modules/electron/dist/libffmpeg.so: symbol cnprantf, version GLIBC_2.4 not defined in file libc.so.6 with link time reference
0|mm  | npm
0|mm  |  ERR! file sh
0|mm  | npm ERR! code ELIFECYCLE
0|mm  | npm ERR! errno ENOENT
0|mm  | npm ERR! syscall spawn
0|mm  | npm
0|mm  |  ERR! magicmirror@2.8.0 start: `sh run-start.sh`
0|mm  | npm ERR! spawn ENOENT
0|mm  | npm
0|mm  |  ERR!
0|mm  | npm ERR! Failed at the magicmirror@2.8.0 start script.
0|mm  | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|mm  | npm ERR! A complete log of this run can be found in:
0|mm  | npm ERR!     /home/pi/.npm/_logs/2019-08-12T05_54_45_996Z-debug.log

I didnt changed anything, the error came from one day to the other an i just see the startscreen and the mirror wont start.

Could somebody help?

About a month ago and now again…
Everything is up to date but the issue is still there. Each day when the Mirror starts, the error comes second for second. A reboot solves the problem the mirror is runinng without problems.

Are there people where the Mirror is working für ober two months without issues? ^^

I will do this.

Thanks.

I didnt upgrade, i made an complete new installation cause of the issue i had before.

Since two days the mirror has no error and everything goes fine, dont know why. I made no upgrade or similar but will do this now. Maybe the issue is gone with that.

Thanks for your help.

Jusat am month ago, it starts again, but with an other fault

0|mm  | > magicmirror@2.8.0 start /home/pi/MagicMirror
0|mm  | > sh run-start.sh
0|mm  | /home/pi/MagicMirror/node_modules/electron/dist/electron: relocation error: /home/pi/MagicMirror/node_modules/electron/dist/libffmpeg.so: symbol cnprantf, version GLIBC_2.4 not defined in file libc.so.6 with link time reference
0|mm  | npm
0|mm  |  ERR! file sh
0|mm  | npm ERR! code ELIFECYCLE
0|mm  | npm ERR! errno ENOENT
0|mm  | npm ERR! syscall spawn
0|mm  | npm
0|mm  |  ERR! magicmirror@2.8.0 start: `sh run-start.sh`
0|mm  | npm ERR! spawn ENOENT
0|mm  | npm
0|mm  |  ERR!
0|mm  | npm ERR! Failed at the magicmirror@2.8.0 start script.
0|mm  | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|mm  | npm ERR! A complete log of this run can be found in:
0|mm  | npm ERR!     /home/pi/.npm/_logs/2019-08-12T05_54_45_996Z-debug.log

I didnt changed anything, the error came from one day to the other an i just see the startscreen and the mirror wont start.

Could somebody help?

@Mykle1
No i cant. I just can reboot or shutdown the Pi by Terminal.
I know i shouldnt unplug the Pi ^^

@Mykle1
I just unplug the Pi sometimes since he is not starting anymore
I know thats not the best way, it’s my 4th Pi ;)

A reinstall wouldnt be the Problem. It is not the first time i have to do this ^^

But i really dont unterstand why he wont start anymore. I also had this before the update, forgot to write. From one to the other the Mirror doesnt starts just with the first start of the day. When i reboot or just unplug the Pi, the mirror starts correct

Could somebody help with this fault?

[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-out.log last 15 lines:
0|mm       | Initializing new module helper ...
0|mm       | Module helper loaded: MMM-Remote-Control
0|mm       | Initializing new module helper ...
0|mm       | Module helper loaded: MMM-Remote-Control-Repository
0|mm       | Initializing new module helper ...
0|mm       | Module helper loaded: MMM-ModuleScheduler
0|mm       | Initializing new module helper ...
0|mm       | Module helper loaded: MMM-PIR-Sensor
0|mm       | No helper found for module: MMM-EyeCandy.
0|mm       | Whoops! There was an uncaught exception...
0|mm       | MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
0|mm       | If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
0|mm       | Whoops! There was an uncaught exception...
0|mm       | MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
0|mm       | If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

/home/pi/.pm2/logs/mm-error.log last 15 lines:
0|mm       |     at tryModuleLoad (internal/modules/cjs/loader.js:559:12)
0|mm       |     at Function.Module._load (internal/modules/cjs/loader.js:551:3)
0|mm       |     at Module.require (internal/modules/cjs/loader.js:658:17)
0|mm       |     at require (internal/modules/cjs/helpers.js:20:18)
0|mm       | XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e g happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
0|mm       | TypeError: Invalid item
0|mm       |     at Menu.insert (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/browser/api/menu.js:109:11)
0|mm       |     at Menu.append (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/browser/api/menu.js:104:15)
0|mm       |     at sorted.forEach (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/browser/api/menu.js:171:10)
0|mm       |     at Array.forEach (<anonymous>)
0|mm       |     at Function.Menu.buildFromTemplate (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/browser/api/menu.js:167:10)
0|mm       |     at App.app.once (/home/pi/MagicMirror/node_modules/electron/dist/resources/default_app.asar/main.js:240:21)
0|mm       |     at Object.onceWrapper (events.js:273:13)
0|mm       |     at App.emit (events.js:187:15)
0|mm       | ATTENTION: default value of option force_s3tc_enable overridden by environment.

Yesterday i made the update to 2.8.0 and now the mirror starts but i cant see it. I just see the startscreen.
The Log doesnt make sence to me.

The black screen was my fault :(
I did a lil mistake. After setting up a other Pi with MMM and copying my config i had the same problem. So i was checking my config (no syntax error), and everything i could rember was, that i changed this:

var config = {
        address: "localhost",                   // Address to listen on, can be:
                                                // - "localhost", "127.0.0.1", $
                                                // - another specific IPv4/6 to$
                                                // - "", "0.0.0.0", "::" to lis$
                                                // Default, when address config$
        port: 8080,
        address: "0.0.0.0",
        ipWhitelist: [],

to this:

var config = {
        address: ["localhost", "0.0.0.0"],                  // Address to listen on, can be:
                                                // - "localhost", "127.0.0.1", $
                                                // - another specific IPv4/6 to$
                                                // - "", "0.0.0.0", "::" to lis$
                                                // Default, when address config$
        port: 8080,
        ipWhitelist: [],

And that was everything and cost me a lot of time ^^