new update/upgrade script, ready for testing

[sdetweil]

@gonzonia can u cat that file again

[gonzonia]

@sdetweil

pi@MagicMirror2:~ $ sudo cat  /etc/apt/sources.list.d/nodesource.list
deb [arch=arm64 Pin-Priority=600 signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x nodistro main

[sdetweil]

@gonzonia hmmmm… ok, don’t know… I will post that too…

best to just move to new again I guess…

can u try this

sudo apt-get update
sudo apt-get install nodejs -y

[gonzonia]

@sdetweil

Thanks for trying. I appreciate all the support you provide the MM community.

pi@MagicMirror2:~ $ sudo apt-get update
sudo apt-get install nodejs -y
Hit:1 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
nodejs is already the newest version (12.22.12~dfsg-1~deb11u4).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
pi@MagicMirror2:~ $ 

[sdetweil]

@gonzonia can u also do

ls /etc/apt/sources.list.d

thats where the other sources are
and cat each file it mentions

nodesource.list  raspi.list

is what I see on the 64bit os

[gonzonia]

@sdetweil

pi@MagicMirror2:~ $ ls /etc/apt/sources.list.d
nodesource.list  raspi.list
pi@MagicMirror2:~ $ sudo cat /etc/apt/sources.list.d/nodesource.list
deb [arch=arm64 Pin-Priority=600 signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x nodistro main
pi@MagicMirror2:~ $ sudo cat /etc/apt/sources.list.d/raspi.list
deb http://archive.raspberrypi.org/debian/ bullseye main
# Uncomment line below then 'apt-get update' to enable 'apt-get source'
#deb-src http://archive.raspberrypi.org/debian/ bullseye main

[sdetweil]

@gonzonia thanks… same as I see…

[gonzonia]

@sdetweil

I’m just going to rebuild. I’ll let you know if I hit any snags. Thanks again.

[Socrates]

Sorry to revive this old thread, but I used this script to update all my modules at once, and they worked perfectly after upgrading Node.js and npm.
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)”

I have a question: Will this script automatically check for and apply module upgrades periodically? Or is it better to add it to a nightly crontab?

[sdetweil]

@Socrates no… this script is only for the base.

[sdetweil]

@Socrates note that without adding a parameter
The script does nothing. It only tests the ability to update the base MagicMirror

Update is two pass process

Test. Make no changes
Do. Apply the changes (with the parameter apply)

Many users have modified MagicMirror base code not knowing about the config and css file design. These changes block the ability to update normally

Over time they forget that they changed the files and what they actually changed. The force way to install is to wipe all changes, but now the result doesn’t work like it used to. Adding a lot of frustration.