Blank mm after update

[evroom]

@sdetweil said in Blank mm after update:

module: “newsfeed”,
disabled: false,
disabled: false,

I see now, that this is rather odd, not correct, without thinking too much about it.
Does my modified command give the same result ?
It sort of contradicts my statement on being sequential, etc.
Or do you really have ?

module: "newsfeed",
disabled: false,
disabled: false,

module: "MMM-Hotword",
disabled: false,
disabled: true,

[sdetweil]

@evroom

easy to run

node scriptname.js

[sdetweil]

@evroom i have disabled, before and after module all thruout the config.js

it is not positional

modules: [
	    {
      diabled: true,
      module: "alert",
    },
    {
      disabled: false,
      module: "updatenotification",
      position: "top_bar",
      config: {
        updateInterval: 3 * 60 * 1000,
        refreshInterval: 10 * 60 * 1000
      }
    }, 
    {
      module: "clock",
      position: "top_right",
      config: {
				showWeek: false,
				sendNotitifications: false
      }
    },
    {
      disabled: false,
      module: "calendar",
      position: "top_left",
      config: {
        showEnd: false,
        timeFormat: 'relative',
        //fetchInterval: 10000,
        calendars: [
          {
            symbol: "family ",
            //url: "https://www.ojrsd.com//site/handlers/icalfeed.ashx?MIID=11",

          //url: "http://localhost:8086/modules/cals/basic.ics"
          },
        ]
      }
    },
    
    {
        disabled: false,
        module: "MMM-SleepWake",
        config: {			
            delay: 5, // minutes , default = 15 minutes
            "source": 
                "External",
                // choices are PIR       -- uses the Raspberry pi hardware dection pins and PIR sensor
                //      	or 
                //             External  -- uses some external source for motion detection, like a video camera
                //                       -- see the github motion project 
                // mode
                // HOW to go to sleep
                //    use hardware(hdmi), software (dpms), or simulate (hide content leaving black screen)
            "mode":"hide",
                // mode choices are 
                //  'pi': 
                //        executes the tvservice command 
                //
                //  'dpms'
                //        executes the 'xset dpms force' command 
                //
                //  'hide'
                //        hides all modules. modules hidden when the sleep is issued will be hidden on wakeup
                //        for energyStar monitors and TVs, this allows the screen to remain powered on so it will come alive on movement
                //
            //detectionDir: '/home/odroid/MagicMirror/modules/MMM-SleepWake/motion'
                // detectionDir: folder containing externally generated file when motion starts
                //               will be created if needed
                // detectionFile:  filename generated for motion start. default = 'detected'
        }
    },
{
      module: "newsfeed",
      disabled: false,
      position: "bottom_bar",
      config: {
				ignoreOldItems:false,
        feeds: [
          {
            title: "New York Times",
            url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
          },
      /*    {
            title: "BBC",
            url: "http://feeds.bbci.co.uk/news/world/rss.xml",

          },    
          {
            title: "SRS",
            url: "http://feeds.news24.com/articles/news24/SouthAfrica/rss",

          },  */        
        ],
        showSourceTitle: true,
        showPublishDate: true
      }
    },
		{
				disabled: false,
				module: 'WaterLevels',
				position: 'top_right',
				config : { 
							width: 400,
							height: 400,
							Pins: [ 'v14','v3' ],
								labels:['Water Usage','Water level'],
								yaxis_legend: ['gallons used','gallons'],
								ranges: [{"min":0,"max":200,"stepSize":100}, {"min":0,"max":2029,"stepSize":500}],
								pinLimits: [20,1700],
							dayrange: 3,
							updateInterval: 5,
							stacked: true,
				}
		}, 
		{
				disabled: false,
				module: "MMM-ImagesPhotos",
				position: "fullscreen",
				config: {
					opacity: 0.9,
					animationSpeed: 0,
					updateInterval: 15000,
					backgroundColor: "#808080",
					path: "/selectedpics",
					debug:true
				}
		},	
		{
				disabled: true,
				module: 'MMM-MQTTfloorplan',
				position: 'center', // this can be any of the regions
				config: {
					mqttServer: {
						url: "192.168.0.110",
						user: "",
						password: ""
						},
						
					floorplan: {
						image: "floorplan.png", // image in subfolder 'images'; change to floorplan.png to avoid git repository changes
						width: 634, // this must be the width of the image above
						height: 392, // this must be the height of the image above
					},
					subscriptions: [
					/*{
						topic: '', // MQTT Topic name
						label: 'Living Light',	// Not displayed anywhere! 
						type: 'door',			// Using 'door' instead 'light' to get 2-state icon
						display: { left: 50, top: 50 },
					},
					{
						topic: '',
						label: 'First Floor Corr PIR',
						type: 'motion',		
						display: { left: 100, top: 150 },
					}, */
					{
						topic: 'LivT',
						label: 'Living Temp',
						type: 'label',
						display: { left: 44, top: 159, prefix: "", suffix: " °C", decimals: 1 },
					},
					{
						topic: 'LivH',
						label: 'Living Humidity',
						type: 'label',
						display: { left: 44, top: 179, prefix: "", suffix: " %RH", decimals: 0 },
					},
					{
						topic: 'GuestT',
						label: 'Guest Room Temp',
						type: 'label',
						display: { left: 255, top: 193, prefix: "", suffix: " °C", decimals: 1 },
					},
					{
						topic: 'GuestH',
						label: 'Guest Room Humidity',
						type: 'label',
						display: { left: 255, top: 213, prefix: "", suffix: " %RH", decimals: 0 },
					},
					{
						topic: 'eStatus',
						label: 'Weather',
						type: 'label',
						  fields: ['OAT','OAH'],
						//key: 'OAT', //I would like to have configurable keyword for each name of object that I want display.
						//jsonpointer: '/OAT',
						display: { left: 55, top: 337, prefix: "", suffix: " °C", decimals: 1 },
					},
					]
				}
			},
{
    disabled: false,
    module: "MMM-AssistantMk2",
    position: "top_right",
    config: {
      record: {
        recordProgram : "arecord",  
        device        : "default",
      },

      notifications: {
        ASSISTANT_ACTIVATED: "HOTWORD_PAUSE",
        ASSISTANT_DEACTIVATED: "HOTWORD_RESUME",
      },
    }
  },
  {
    module: "MMM-Hotword",
    disabled: false,
    config: {
      record: {
        recordProgram : "arecord",  
        device        : "default",
      },
      snowboy: [
      {
        hotwords: "smart mirror", //this will be sent to other module for distinguishing which hotword is detected.
        file: "resources/models/smart_mirror.umdl",
        sensitivity: '0.5',
      },
      ],
      autostart:true,
      autorestart: false,
      onDetected: {
        notification: function (payload) {
          return "ASSISTANT_ACTIVATE"
        },
        payload: function (payload){
          return {
            profile: payload.hotword
          }
        }
      },
    },
  },
	{
		disabled: true,
		module: "default/SampleModule",
		position:'middle'
	},
	{
					disabled: true,
					module: "MMM-GoogleMapsTraffic",
		      position: "bottom_right",
			    config: {
			                        lat: 41.8816281,
															lng: -87.6608605,					 
			                height: "300px",
			                width: "300px",
					mapTypeId: "roadmap",
			                styledMapType: "transparent",
			                disableDefaultUI: "true",
					updateInterval: "60000",
			                backgroundColor: "hsla(0, 0%, 0%, 0)",
			                markers: [
			                    {
			                        lat: 41.8816281,
															lng: -87.6608605,
			                        fillColor: "#9966ff"
		                    	},
		                	 ]
					}
		},	
		{
			  disabled: true,
				module: "MMM-PC-Stats",
				position: "middle",
				config: {
					
				}
		},
	{
		disabled: true,
		module: 'mmm-weatherchart',
		position: 'bottom_left', // this can be any of the regions
		config: {
			country: 'Germany', // as determined above
			area: 'North_Rhine-Westphalia', // as determined above
			city: 'Duisburg', // as determined above
			updateInterval: 60 * 60 * 1000, // update every hour
			hideBorder: true, // whether or not a border with city name should be shown
			negativeImage: true, // whether or not the default white image should be inverted
			mmDirectory: "/home/odroid/MagicMirror/" // required for caching; adjust if it differs
		}
	},		
	]

[sdetweil]

@evroom modified results at least lose the comments

module: "alert",
disabled: false,
module: "updatenotification",
module: "clock",
disabled: false,
module: "calendar",
disabled: false,
module: "MMM-SleepWake",
module: "newsfeed",
disabled: false,
disabled: false,
module: 'WaterLevels',
disabled: false,
module: "MMM-ImagesPhotos",
disabled: true,
module: 'MMM-MQTTfloorplan',
disabled: false,
module: "MMM-AssistantMk2",
module: "MMM-Hotword",
disabled: false,
disabled: true,
module: "default/SampleModule",
disabled: true,
module: "MMM-GoogleMapsTraffic",
disabled: true,
module: "MMM-PC-Stats",
disabled: true,
module: 'mmm-weatherchart',

[evroom]

@kvicksson

If these are the only ‘errors’ you see in the pm2 log, then it looks you are quite okay.

As said, I personally would like to ged rid of npm audit errors, but if other board-members think it imposes a hazard to a good running system, then I would leave it. I remember that sometimes some dependencies just did not want to go away and I left it that way.

The only thing to consider, is that you are still running on Debian jessie, where the majority probably runs using stretch and fast adopters on buster.
I would leave this until you setup a new system.

So, when it runs as you expect it to run, then you can close this topic and enjoy your mirror. Otherwise we will hear from you.

[evroom]

@sdetweil said in Blank mm after update:

it is not positional

Okay, then it makes sense.
I have module: always first and then disabled:.
So you see that you never can assume something :-)

Using your script now :thumbs_up:

[sdetweil]

@kvicksson can u mark your issue resolved?