Blank mm after update

[evroom]

@kvicksson said in Blank mm after update:

got an error on the egrep command

Forgot to escape the [, try this:

cat /boot/config.txt | egrep -v '^$|^#|^\['

EDIT: Did not forget to escape it, it is this shitty forum that removes it.

There needs to a backslash \ before the last [

[evroom]

@lavolp3 said in Blank mm after update:

Fixing” these npm warnings on the root MM install could break the whole mirror

The npm audit itself suggests to fix it using the fix option.
I personally never had any issues with this command, but perhaps I was lucky till now.
Sometimes it cannot resolve an issue, but it never broke anything.

But, if it appears to be that dangerous, then indeed it is perhaps to refrain from it when not really necessary.

[evroom]

@kvicksson said in Blank mm after update:

(node:2465) [DEP0025] DeprecationWarning: sys is deprecated. Use util instead.

I saw this error once for a specific module.
Needed a small code change.
Will try to find what is was.

[evroom]

This is a command to list all your modules that are in the config.js and which ones are enabled/disabled:

$ cat ~/MagicMirror/config/config.js | egrep 'module:|disabled' | sed -e 's/^[ \t]*//'

[sdetweil]

@evroom cool… how can u tell which module ‘disabled’ applies to?

system 1

module: "alert",
disabled: false,
module: "updatenotification",
module: "clock",
disabled: false,
module: "calendar",
disabled: false,
module: "MMM-SleepWake",
module: "newsfeed",
disabled: false,
disabled: false,
module: 'WaterLevels',
disabled: false,
module: "MMM-ImagesPhotos",
disabled: true,
module: 'MMM-MQTTfloorplan',
disabled: false,
module: "MMM-AssistantMk2",
module: "MMM-Hotword",
disabled: false,
disabled: true,
module: "default/SampleModule",
disabled: true,
module: "MMM-GoogleMapsTraffic",
disabled: true,
module: "MMM-PC-Stats",
disabled: true,
module: 'mmm-weatherchart',

system 2

module: "alert",
//                      module: "updatenotification",
module: "clock",
//                      module: "calendar",
//                      module: 'MMM-WunderGround',
//                      module: "newsfeed",
disabled: false,
module: "MMM-SleepWake",
module: "MMM-ImagesPhotos",
module: 'MMM-voice',
disabled: false,
module: 'WaterLevels',
module: 'MMM-WatchDog',

system 3

module: "alert",
module: "updatenotification",
module: "clock",
module: "calendar",
disabled: true,
module: "compliments",
module: "currentweather",
module: "weatherforecast",
module: "newsfeed",
module: "MMM-ImagesPhotos",
disabled: false,
module: "MMM-SleepWake",

i wrote this little piece of node js to find active modules for my upgrade script

const config = require('../config/config.js');const fs=require('fs');
for(let m of config.modules){
	if(!(m.disabled || false)){
       	console.log(m.module);
  } 
}

[evroom]

@sdetweil said in Blank mm after update:

how can u tell which module ‘disabled’ applies to?

I am assuming it is sequential and that disabled: comes after module:, when present. Don’t think a ‘runaway’ disabled could exist.
And for the purpose it serves, it does its job, IMHO.

Perhaps it is better to first remove the leading blank space and then do the grep (and to ignore the comment parts):

$ cat ~/MagicMirror/config/config.js | sed -e 's/^[ \t]*//' | egrep -w '^module:|^disabled:'

Your piece of node.js looks nice, but how to run it standalone ?
If used as part of a script, it makes more sense to do it this way (more control, more flexible).

[evroom]

@sdetweil said in Blank mm after update:

module: “newsfeed”,
disabled: false,
disabled: false,

I see now, that this is rather odd, not correct, without thinking too much about it.
Does my modified command give the same result ?
It sort of contradicts my statement on being sequential, etc.
Or do you really have ?

module: "newsfeed",
disabled: false,
disabled: false,

module: "MMM-Hotword",
disabled: false,
disabled: true,

[sdetweil]

@evroom

easy to run

node scriptname.js

[sdetweil]

@evroom i have disabled, before and after module all thruout the config.js

it is not positional

modules: [
	    {
      diabled: true,
      module: "alert",
    },
    {
      disabled: false,
      module: "updatenotification",
      position: "top_bar",
      config: {
        updateInterval: 3 * 60 * 1000,
        refreshInterval: 10 * 60 * 1000
      }
    }, 
    {
      module: "clock",
      position: "top_right",
      config: {
				showWeek: false,
				sendNotitifications: false
      }
    },
    {
      disabled: false,
      module: "calendar",
      position: "top_left",
      config: {
        showEnd: false,
        timeFormat: 'relative',
        //fetchInterval: 10000,
        calendars: [
          {
            symbol: "family ",
            //url: "https://www.ojrsd.com//site/handlers/icalfeed.ashx?MIID=11",

          //url: "http://localhost:8086/modules/cals/basic.ics"
          },
        ]
      }
    },
    
    {
        disabled: false,
        module: "MMM-SleepWake",
        config: {			
            delay: 5, // minutes , default = 15 minutes
            "source": 
                "External",
                // choices are PIR       -- uses the Raspberry pi hardware dection pins and PIR sensor
                //      	or 
                //             External  -- uses some external source for motion detection, like a video camera
                //                       -- see the github motion project 
                // mode
                // HOW to go to sleep
                //    use hardware(hdmi), software (dpms), or simulate (hide content leaving black screen)
            "mode":"hide",
                // mode choices are 
                //  'pi': 
                //        executes the tvservice command 
                //
                //  'dpms'
                //        executes the 'xset dpms force' command 
                //
                //  'hide'
                //        hides all modules. modules hidden when the sleep is issued will be hidden on wakeup
                //        for energyStar monitors and TVs, this allows the screen to remain powered on so it will come alive on movement
                //
            //detectionDir: '/home/odroid/MagicMirror/modules/MMM-SleepWake/motion'
                // detectionDir: folder containing externally generated file when motion starts
                //               will be created if needed
                // detectionFile:  filename generated for motion start. default = 'detected'
        }
    },
{
      module: "newsfeed",
      disabled: false,
      position: "bottom_bar",
      config: {
				ignoreOldItems:false,
        feeds: [
          {
            title: "New York Times",
            url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
          },
      /*    {
            title: "BBC",
            url: "http://feeds.bbci.co.uk/news/world/rss.xml",

          },    
          {
            title: "SRS",
            url: "http://feeds.news24.com/articles/news24/SouthAfrica/rss",

          },  */        
        ],
        showSourceTitle: true,
        showPublishDate: true
      }
    },
		{
				disabled: false,
				module: 'WaterLevels',
				position: 'top_right',
				config : { 
							width: 400,
							height: 400,
							Pins: [ 'v14','v3' ],
								labels:['Water Usage','Water level'],
								yaxis_legend: ['gallons used','gallons'],
								ranges: [{"min":0,"max":200,"stepSize":100}, {"min":0,"max":2029,"stepSize":500}],
								pinLimits: [20,1700],
							dayrange: 3,
							updateInterval: 5,
							stacked: true,
				}
		}, 
		{
				disabled: false,
				module: "MMM-ImagesPhotos",
				position: "fullscreen",
				config: {
					opacity: 0.9,
					animationSpeed: 0,
					updateInterval: 15000,
					backgroundColor: "#808080",
					path: "/selectedpics",
					debug:true
				}
		},	
		{
				disabled: true,
				module: 'MMM-MQTTfloorplan',
				position: 'center', // this can be any of the regions
				config: {
					mqttServer: {
						url: "192.168.0.110",
						user: "",
						password: ""
						},
						
					floorplan: {
						image: "floorplan.png", // image in subfolder 'images'; change to floorplan.png to avoid git repository changes
						width: 634, // this must be the width of the image above
						height: 392, // this must be the height of the image above
					},
					subscriptions: [
					/*{
						topic: '', // MQTT Topic name
						label: 'Living Light',	// Not displayed anywhere! 
						type: 'door',			// Using 'door' instead 'light' to get 2-state icon
						display: { left: 50, top: 50 },
					},
					{
						topic: '',
						label: 'First Floor Corr PIR',
						type: 'motion',		
						display: { left: 100, top: 150 },
					}, */
					{
						topic: 'LivT',
						label: 'Living Temp',
						type: 'label',
						display: { left: 44, top: 159, prefix: "", suffix: " °C", decimals: 1 },
					},
					{
						topic: 'LivH',
						label: 'Living Humidity',
						type: 'label',
						display: { left: 44, top: 179, prefix: "", suffix: " %RH", decimals: 0 },
					},
					{
						topic: 'GuestT',
						label: 'Guest Room Temp',
						type: 'label',
						display: { left: 255, top: 193, prefix: "", suffix: " °C", decimals: 1 },
					},
					{
						topic: 'GuestH',
						label: 'Guest Room Humidity',
						type: 'label',
						display: { left: 255, top: 213, prefix: "", suffix: " %RH", decimals: 0 },
					},
					{
						topic: 'eStatus',
						label: 'Weather',
						type: 'label',
						  fields: ['OAT','OAH'],
						//key: 'OAT', //I would like to have configurable keyword for each name of object that I want display.
						//jsonpointer: '/OAT',
						display: { left: 55, top: 337, prefix: "", suffix: " °C", decimals: 1 },
					},
					]
				}
			},
{
    disabled: false,
    module: "MMM-AssistantMk2",
    position: "top_right",
    config: {
      record: {
        recordProgram : "arecord",  
        device        : "default",
      },

      notifications: {
        ASSISTANT_ACTIVATED: "HOTWORD_PAUSE",
        ASSISTANT_DEACTIVATED: "HOTWORD_RESUME",
      },
    }
  },
  {
    module: "MMM-Hotword",
    disabled: false,
    config: {
      record: {
        recordProgram : "arecord",  
        device        : "default",
      },
      snowboy: [
      {
        hotwords: "smart mirror", //this will be sent to other module for distinguishing which hotword is detected.
        file: "resources/models/smart_mirror.umdl",
        sensitivity: '0.5',
      },
      ],
      autostart:true,
      autorestart: false,
      onDetected: {
        notification: function (payload) {
          return "ASSISTANT_ACTIVATE"
        },
        payload: function (payload){
          return {
            profile: payload.hotword
          }
        }
      },
    },
  },
	{
		disabled: true,
		module: "default/SampleModule",
		position:'middle'
	},
	{
					disabled: true,
					module: "MMM-GoogleMapsTraffic",
		      position: "bottom_right",
			    config: {
			                        lat: 41.8816281,
															lng: -87.6608605,					 
			                height: "300px",
			                width: "300px",
					mapTypeId: "roadmap",
			                styledMapType: "transparent",
			                disableDefaultUI: "true",
					updateInterval: "60000",
			                backgroundColor: "hsla(0, 0%, 0%, 0)",
			                markers: [
			                    {
			                        lat: 41.8816281,
															lng: -87.6608605,
			                        fillColor: "#9966ff"
		                    	},
		                	 ]
					}
		},	
		{
			  disabled: true,
				module: "MMM-PC-Stats",
				position: "middle",
				config: {
					
				}
		},
	{
		disabled: true,
		module: 'mmm-weatherchart',
		position: 'bottom_left', // this can be any of the regions
		config: {
			country: 'Germany', // as determined above
			area: 'North_Rhine-Westphalia', // as determined above
			city: 'Duisburg', // as determined above
			updateInterval: 60 * 60 * 1000, // update every hour
			hideBorder: true, // whether or not a border with city name should be shown
			negativeImage: true, // whether or not the default white image should be inverted
			mmDirectory: "/home/odroid/MagicMirror/" // required for caching; adjust if it differs
		}
	},		
	]

[sdetweil]

@evroom modified results at least lose the comments

module: "alert",
disabled: false,
module: "updatenotification",
module: "clock",
disabled: false,
module: "calendar",
disabled: false,
module: "MMM-SleepWake",
module: "newsfeed",
disabled: false,
disabled: false,
module: 'WaterLevels',
disabled: false,
module: "MMM-ImagesPhotos",
disabled: true,
module: 'MMM-MQTTfloorplan',
disabled: false,
module: "MMM-AssistantMk2",
module: "MMM-Hotword",
disabled: false,
disabled: true,
module: "default/SampleModule",
disabled: true,
module: "MMM-GoogleMapsTraffic",
disabled: true,
module: "MMM-PC-Stats",
disabled: true,
module: 'mmm-weatherchart',