Read the statement by Michael Teeuw here.
How I got my Magic Mirror working on a Raspberry Pi 0 (zero)
-
@Andrius-ok said in How I got my Magic Mirror working on a Raspberry Pi 0 (zero):
@lasharor ok tomorrow I will share the image
Have you forgotten :(?
-
Hi @lasharor , my apologies. Yes I have forgotten, very sorry was on long vacation.
So there is my MM image with Chromium for Raspberry Pi Zero Whttps://www.dropbox.com/sh/kdo5q1pxjluca49/AACvP81YjZik6R90BHZNiSZ5a?dl=0
note: you have to configure WiFi by yoursefl and also all modules to work properly in Yours language.
-
@Andrius-ok Thank You! Worked Perfectly. Setup Wifi (your SSID and PW were still in there) and your config loaded. I am in the process of converting to my config.
-
@bmarofsky said in How I got my Magic Mirror working on a Raspberry Pi 0 (zero):
@Andrius-ok Thank You! Worked Perfectly. Setup Wifi (your SSID and PW were still in there) and your config loaded. I am in the process of converting to my config.
so i have all my modules in place and the system crashes: unable to handle kernel null pointer dereference at virtual address
I’ll roll back to your setup and see if it is stable. i am using calendar, weather, clock and newsfeed- very similar to yours. -
@bmarofsky nice that you trying to work your MM more “under preasure” what can Raspberry Pi Zero W :) I believe that I take the maximum from this SBC which from the forum cannot do that I did :) by the way share and show photo ;) thats nice to see.
P.s. Now checking much more with ASUS TinkerBord - follow me! ;)
-
@bmarofsky if need advice please you can ask me
-
@bmarofsky said in How I got my Magic Mirror working on a Raspberry Pi 0 (zero):
so i have all my modules in place and the system crashes: unable to handle kernel null pointer dereference at virtual address
I’ll roll back to your setup and see if it is stable. i am using calendar, weather, clock and newsfeed- very similar to yours.Please report if you could stabilize your system. I also had crashes (approx twice a day) when using Chromium. I didn’t had time to investigate the exact cause (to heavy load?).
-
@Andrius-ok Thanks for the image. This works fine. Have you had any succes trying to upgrade Magic mirror? Noticed this image was running a older version.
-
@Hawking my MM with this image on Raspberry Pi Zero W working a half a year without crashing, restarting etc., what modules do you using? Did you try only with my modules? You have to know that SBC is very slow and poor on performance so my modules which is in img is taking 99% CPU always, if tou trying to add one more module I think it’s too much
-
@lasharor yes of course, no problems? Did you? Having issues?
