no /etc/kbd/config Folder/File

[Miked180]

now i see the mirror, i wait few minutes

[Miked180]

Now i got a black screen.

/home/pi/.pm2/logs/MagicMirror-error.log last 100 lines:
0|MagicMir | npm ERR! code ELIFECYCLE
0|MagicMir | npm ERR! errno 1
0|MagicMir | npm ERR! magicmirror@2.10.1 start: ./run-start.sh
0|MagicMir | npm ERR! Exit status 1
0|MagicMir | npm ERR!
0|MagicMir | npm ERR! Failed at the magicmirror@2.10.1 start script.
0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|MagicMir |
0|MagicMir | npm ERR! A complete log of this run can be found in:
0|MagicMir | npm ERR! /home/pi/.npm/_logs/2020-03-11T17_47_10_283Z-debug.log

from 283Z-debug.log :

/home/pi/.pm2/logs/MagicMirror-error.log last 100 lines:
0|MagicMir | npm ERR! code ELIFECYCLE
0|MagicMir | npm ERR! errno 1
0|MagicMir | npm ERR! magicmirror@2.10.1 start: ./run-start.sh
0|MagicMir | npm ERR! Exit status 1
0|MagicMir | npm ERR!
0|MagicMir | npm ERR! Failed at the magicmirror@2.10.1 start script.
0|MagicMir | npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
0|MagicMir |
0|MagicMir | npm ERR! A complete log of this run can be found in:
0|MagicMir | npm ERR! /home/pi/.npm/_logs/2020-03-11T17_47_10_283Z-debug.log

after restart raspberry i see the mirror

[sdetweil]

@Miked180 before restart pi, do with keyboard on pi…

alt-spacebar, n

see if MM window will minimize

also, setup ssh on pi, and ssh from windows to pi to examine…

xset q
setterm -blank 0 -powerdown 0

from here https://wiki.archlinux.org/index.php/Display_Power_Management_Signaling

in ssh terminal session, may have to do export DISPLAY=:0

[Miked180]

thanks for your help,

der is no file in /etc/X11/xorg.conf.d

:(((((

ist better to make a new setup ??

in ssh terminal session, may have to do export DISPLAY=:0 ?

[sdetweil]

@Miked180 said in no /etc/kbd/config Folder/File:

der is no file in /etc/X11/xorg.conf.d

where does that happen?

[Miked180]

tis is in your link . or on the flase position in the page ?

Sorry i dont know about this .

Im learning since short time but im not so good as you :-=

UPDATE : i geht : setterm: terminal xterm-256color does not support --blank

if i use your command

[sdetweil]

@Miked180 sorry, no idea… i thought that was one of the best sites for this kind of info

[Miked180]

i make now a new setpu, its better and cleaner, thansk very much for your big support

[Miked180]

This post is deleted!