MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast

sdetweil

@chris1971 that means something started MM, and you are trying to start it again…

you cannot have two copies running at the same time on the same port

do this

pm2 status

on one of my machines it looks like this

 ┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
 │ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
 ├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
 │ 0  │ MagicMirror        │ fork     │ 20   │ online    │ 0%       │ 2.4mb    │
 └────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘

is there only 1 app defined for pm2 to manage?

chris1971

@sdetweil

pi@raspberrypi:~/MagicMirror $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 0 │ online │ 0% │ 2.4mb │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘

looks like this…
I installed your scrips and agreed both times (y/n) when I was asked to remove screensaver and start pm.

sdetweil

@chris1971 ok, so when u need to change something you do

pm2 stop 0 (or pm2 stop MagicMirror), (or pm2 stop all)

make your change and then

pm2 start 0, or MagicMirror, or all

chris1971

@sdetweil said in MMM-OpenWeatherForecast - Replacement for MMM-DarkSkyForecast:

pm2 stop all

have stopped with pm2 stop all

pi@raspberrypi:~/MagicMirror $ pm2 stop all
[PM2] Applying action stopProcessId on app [all](ids: [ 0 ])
[PM2] MagicMirror ✓
┌────┬────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name │ namespace │ version │ mode │ pid │ uptime │ ↺ │ status │ cpu │ mem │ user │ watching │
├────┼────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ default │ 2.22.0 │ fork │ 0 │ 0 │ 0 │ stopped │ 0% │ 0b │ pi │ disabled │
└────┴────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘

the started with pm2 start all

pi@raspberrypi:~/MagicMirror $ pm2 start all
[PM2] Applying action restartProcessId on app [all](ids: [ 0 ])
[PM2] MagicMirror ✓
[PM2] Process successfully started
┌────┬────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name │ namespace │ version │ mode │ pid │ uptime │ ↺ │ status │ cpu │ mem │ user │ watching │
├────┼────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ default │ 2.22.0 │ fork │ 2414 │ 0s │ 0 │ online │ 0% │ 2.5mb │ pi │ disabled │
└────┴────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘

But no changes…

checked the status and see only on 8080

pi@raspberrypi:~ $ sudo netstat -lnptu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 565/sshd: /usr/sbin
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 519/cupsd
tcp 0 0 0.0.0.0:8080 0.0.0.0: LISTEN 1206/electron.js*
tcp6 0 0 ::1:3350 :::* LISTEN 539/xrdp-sesman
tcp6 0 0 :::22 :::* LISTEN 565/sshd: /usr/sbin
tcp6 0 0 ::1:631 :::* LISTEN 519/cupsd
tcp6 0 0 :::3389 :::* LISTEN 585/xrdp
udp 0 0 0.0.0.0:68 0.0.0.0:* 526/dhcpcd
udp 0 0 0.0.0.0:631 0.0.0.0:* 612/cups-browsed
udp 0 0 0.0.0.0:5353 0.0.0.0:* 376/avahi-daemon: r
udp 0 0 0.0.0.0:58721 0.0.0.0:* 376/avahi-daemon: r
udp6 0 0 :::546 :::* 526/dhcpcd
udp6 0 0 :::41014 :::* 376/avahi-daemon: r
udp6 0 0 :::5353 :::* 376/avahi-daemon: r

sdetweil

@chris1971 correct, and it should be running correctly now

i never use pm2 when I am changing config

pm2 stop all

cd ~/MagicMirror
npm start 
(ctrl-m if on same screen, to minimize) 
look at messages 
ctrl-c to stop

make changes, rinse and repeat til happy

then pm2 start all

chris1971

@sdetweil Does that mean I have to stopp pm before I make changes in the config?

Module is still not loading…

When I remove the script for google maps from the config.js the weather module is working. When I place the script in the config.js again, the weather module is not loading.

sdetweil

@chris1971 yes, when u make any change, you should stop MM and then then restart it…

as I said before, some modules impact others…

I fixed a similar problem in OpenWeatherMapForecast as the author was not updating it anymore

this is my fork with the fix https://github.com/sdetweil/MMM-OpenWeatherMapForecast

I would look at the messages

pm2 stop all
pm2 flush
pm2 start all
wait
pm2 logs --lines=100

or, not use pm2

pm2 stop all
cd ~/MagicMirror
npm start >somefile.txt 2>&1

wait
ctrl-c to stop MM (in the window where you did npm start )
then examine the contents of somefile.txt to see if there was any error that might causing the problem

you can also look in the MagicMirror developers window to see if there is a problem there
ctrl-shift-i on the running MM screen
select the console tab
and put weath in the filter field
this will reduce the output to modules with weath in their name
looking for any content in red

chris1971

@sdetweil lot of stuff…

pi@raspberrypi:~ $ pm2 logs --lines=100
[TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option)
/home/pi/.pm2/pm2.log last 100 lines:
PM2 | 2023-03-31T16:08:12: PM2 log: App [MagicMirror:0] starting in -fork mode-
PM2 | 2023-03-31T16:08:12: PM2 log: App [MagicMirror:0] online

/home/pi/.pm2/logs/MagicMirror-error.log last 100 lines:
0|MagicMir | [31.03.2023 16:08.20.333] [WARN] You’re using a full whitelist configuration to allow for all IPs
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | …/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2472:0331/160823.980369:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=134
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | …/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2472:0331/160825.475337:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=134
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | …/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2472:0331/160827.345249:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=134
0|MagicMir | [2512:0331/160829.375127:ERROR:command_buffer_proxy_impl.cc(128)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer.

/home/pi/.pm2/logs/MagicMirror-out.log last 100 lines:
0|MagicMir |
0|MagicMir | > magicmirror@2.22.0 start
0|MagicMir | > DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js
0|MagicMir |
0|MagicMir | [31.03.2023 16:08.18.855] [LOG] Starting MagicMirror: v2.22.0
0|MagicMir | [31.03.2023 16:08.18.868] [LOG] Loading config …
…
…
…

I read something about the GPU process in the forum - could this infuence the system?

sdetweil

@chris1971 possibly

for pm2 add the

export ELECTRON_DISABLE_GPU=1

to the ~/MagicMirror/installers/mm.sh

before the line

DISPLAY=:0 npm start

for using npm start
just do it once in the terminal window

chris1971

@sdetweil still not loading…

pi@raspberrypi:~/MagicMirror $ npm start

magicmirror@2.22.0 start
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js

[31.03.2023 16:29.04.053] [LOG] Starting MagicMirror: v2.22.0
[31.03.2023 16:29.04.077] [LOG] Loading config …
[31.03.2023 16:29.04.113] [LOG] Loading module helpers …
[31.03.2023 16:29.04.120] [LOG] No helper found for module: alert.
[31.03.2023 16:29.04.191] [LOG] Initializing new module helper …
[31.03.2023 16:29.04.194] [LOG] Module helper loaded: updatenotification
[31.03.2023 16:29.04.196] [LOG] No helper found for module: clock.
[31.03.2023 16:29.04.591] [LOG] Initializing new module helper …
[31.03.2023 16:29.04.592] [LOG] Module helper loaded: MMM-OpenWeatherForecast
[31.03.2023 16:29.05.736] [LOG] Initializing new module helper …
[31.03.2023 16:29.05.740] [LOG] Module helper loaded: calendar
[31.03.2023 16:29.05.754] [LOG] No helper found for module: MMM-TextClock.
[31.03.2023 16:29.06.143] [LOG] Initializing new module helper …
[31.03.2023 16:29.06.150] [LOG] Module helper loaded: newsfeed
[31.03.2023 16:29.06.155] [LOG] No helper found for module: MMM-RAIN-MAP.
[31.03.2023 16:29.06.170] [LOG] Initializing new module helper …
[31.03.2023 16:29.06.172] [LOG] Module helper loaded: MMM-GoogleMapsTraffic
[31.03.2023 16:29.06.173] [LOG] All module helpers loaded.
[31.03.2023 16:29.06.803] [LOG] Starting server on port 8080 …
[31.03.2023 16:29.06.828] [WARN] You’re using a full whitelist configuration to allow for all IPs
[31.03.2023 16:29.06.884] [ERROR] Whoops! There was an uncaught exception…
[31.03.2023 16:29.06.900] [ERROR] Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
at Server.setupListenHandle [as _listen2] (node:net:1432:16)
at listenInCluster (node:net:1480:12)
at doListen (node:net:1629:7)
at process.processTicksAndRejections (node:internal/process/task_queues:84:21) {
code: ‘EADDRINUSE’,
errno: -98,
syscall: ‘listen’,
address: ‘0.0.0.0’,
port: 8080
}
[31.03.2023 16:29.06.901] [ERROR] MagicMirror² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[31.03.2023 16:29.06.902] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
[31.03.2023 16:29.08.680] [LOG] Launching application.
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
…/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2071:0331/162912.978009:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=6
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
…/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2071:0331/162914.498526:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=6
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
…/…/buildtools/third_party/libc++/trunk/include/vector:1425: assertion __n < size() failed: vector[] index out of bounds[2071:0331/162915.779583:ERROR:gpu_process_host.cc(991)] GPU process exited unexpectedly: exit_code=6
[31.03.2023 16:29.37.588] [LOG] Shutting down server…
[31.03.2023 16:29.37.595] [LOG] Stopping module helper: updatenotification
[31.03.2023 16:29.37.596] [LOG] Stopping module helper: MMM-OpenWeatherForecast
[31.03.2023 16:29.37.596] [LOG] Stopping module helper: calendar
[31.03.2023 16:29.37.597] [LOG] Stopping module helper: newsfeed
[31.03.2023 16:29.37.597] [LOG] Stopping module helper: MMM-GoogleMapsTraffic