MagicMirror² v2.15.0 is available don't work.

BKeyport

mmm-dht-sensor@1.1.1 /home/pi/MagicMirror/modules/MMM-DHT-Sensor
└─┬ electron-rebuild@1.10.1
  └── node-abi@2.16.0

For what it’s worth, it started working again on it’s own after issuing this command. No need to reinstall it’s dependencies.

Bizarre.

sdetweil

@bkeyport great!

ChrizZz

I do have some strange things after the update.

At first, the new weather module is just “loading” without displaying content. Even after 30+ minutes. Is there something wrong with the config? I saw that there is a minor issue with the data request which will cause it to load for ~10min (or to reduce the update interval).

{
			module: "weather",
			position: "top_right",
			classes: "always",
			config: {
				// See 'Configuration options' for more information.
				type: "current",
				locationID: "YYY",
				appid: "XXX"
			}
		},

And I have new lines of errors in the log, I don’t understand why these syntax errors appear. I checked my config file and everything looks fine. Regarding git, does this mean it couldn’t connect to github?

[03.04.2021 23:22.22.900] [ERROR] Failed to parse data , error SyntaxError: Unexpected end of JSON input
[03.04.2021 23:22.24.037] [ERROR] Failed to parse data , error SyntaxError: Unexpected end of JSON input
[03.04.2021 23:22.25.987] [ERROR] Failed to fetch git data for MMM-CountEvents: Error: block timeout reached
[03.04.2021 23:22.27.080] [ERROR] Failed to fetch git data for MMM-Parcel: Error: block timeout reached
[03.04.2021 23:22.35.518] [ERROR] Failed to fetch git data for MMM-Face-Reco-DNN: Error: block timeout reached
[03.04.2021 23:22.39.290] [ERROR] Failed to fetch git data for MMM-PIR-Sensor: Error: block timeout reached
[03.04.2021 23:32.42.638] [ERROR] Failed to fetch git data for MMM-CountEvents: Error: block timeout reached
[03.04.2021 23:37.14.466] [ERROR] Failed to parse data , error SyntaxError: Unexpected end of JSON input
[03.04.2021 23:37.14.577] [ERROR] Failed to parse data , error SyntaxError: Unexpected end of JSON input
[03.04.2021 23:52.14.126] [ERROR] Failed to parse data , error SyntaxError: Unexpected end of JSON input
[03.04.2021 23:52.14.377] [ERROR] Failed to parse data , error SyntaxError: Unexpected end of JSON input

sdetweil

@chrizzz looks like a networking error… did u npm install after git pull? did both work?

danjvd

@sdetweil Thanks for the help, was about to make a post when I found this thread.

ChrizZz

@sdetweil yes I did and both worked.

I did npm install in all module folders too and did the npm install of MM multiple times just to check if something is wrong

Stoffbeuteluwe

Hallo, i have installed the updatescript and than I have installed the valid url …the mirror starts normal and when i stop the Mirror I get this.

nal SIGINT
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.15.0 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the magicmirror@2.15.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /Users/patrickhahn/.npm/_logs/2021-04-06T20_05_51_094Z-debug.log
patrickhahn@Mac-mini MagicMirror %

hope somebody can help me …thanks

sdetweil

@stoffbeuteluwe that’s ok when u stop

unfriendlydevice

@sdetweil what is the full command to run this? I’ve done some searching on the forum but haven’t found anything.

sdetweil

@unfriendlydevice run ‘this’???