MMM-RemoteControl: Can't see remote in MM and can't access

[CheapDad]

Noob here. I believe I’ve correctly installed the module. However, I cannot see it in the MM and I cannot access the MM from another device on my internal network. Here’s the key entries in my config.js:

The network settings:

config = {
	address: '0.0.0.0', 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.0.42", "::ffff:192.168.0.50"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

And for the module itself:

 {
    module: 'MMM-Remote-Control',
    // uncomment the following line to show the URL of the remote control on the mirror
    // position: 'bottom_left',
    // you can hide this module afterwards from the remote control itself
    config: {
        customCommand: {},  // Optional, See "Using Custom Commands" below
        showModuleApiMenu: true, // Optional, Enable the Module Controls menu
        secureEndpoints: true, // Optional, See API/README.md
        // uncomment any of the lines below if you're gonna use it
        // customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below
        // apiKey: "", // Optional, See API/README.md for details
        // classes: {} // Optional, See "Custom Classes" below
    }
},

[sdetweil]

@cheapdad turn off the ipWhitelist, which is currently only allowing from localhost (127.0.0.1)

ipWhitelist:[]

[CheapDad]

@sdetweil That did it; thank you! Interestingly, I still don’t see a control menu on the mirror. I can access it through another device, though, so that’s good.