MMM-CalendarExt the mirror knocks me down?

chrixbrown

@djboob66 I am doing my configurations in virtual box and if I have everything correct I do not know why it gives me that error.


let config = {
	address: "0.0.0.0",	// default is "localhost"
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
    module: 'MMM-Remote-Control',
    // position: 'bottom_left',
    config: {
        customCommand: {
			        shutdownCommand: 'shell command to shutdown your pc',
        rebootCommand: 'shell command to reboot your pc',
        monitorOnCommand: 'shell command to turn on your monitor',
        monitorOffCommand: 'shell command to turn off your monitor',
        monitorStatusCommand: 'shell command to return status of monitor, must return either "HDMI" or "true" if screen is on; or "TV is Off" or "false" if it is off to be recognized'
		},  // Optional, See "Using Custom Commands" below
        showModuleApiMenu: true, // Optional, Enable the Module Controls menu
        secureEndpoints: true, // Optional, See API/README.md
        customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below
        apiKey: "bc2e979db92f4741afad01d5d18eb8e2", // Optional, See API/README.md for details
        classes: {
			"Any Name You Want": {
            hide: ["calendar"],
            show: ["newsfeed"],
            toggle: ["clock"],
        },
        "Another Name You Want": {
            hide: ["newsfeed"],
            show: ["calendar"],
        },
		} // Optional, See "Custom Classes" below
    }
},
		{
			module: "alert",
		},
		{
		module: "clock",
		position: "top_left",	// This can be any of the regions.
		config: {
			displaySeconds: "true",
			displayType: "both", //digital, analog, or both}
			clockBold: "true"
		}
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "https://calendar.google.com/calendar/ical/trabajoonline043%40gmail.com/public/basic.ics"					}
				]
			}
		},
				{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "Gering",
				locationID: "5695604", 
				apiKey: "220ba692d61b02e41ea809571c2ff06e"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Gering",
				locationID: "5695604", 
				apiKey: "220ba692d61b02e41ea809571c2ff06e"
			}
		},
		{
  module: "MMM-OpenWeatherMapForecast",
  header: "Weather",
  position: "top_right",
  classes: "default everyone",
  disabled: false,
  config: {
    apikey: "220ba692d61b02e41ea809571c2ff06e",
    latitude: "41.821541",
    longitude: "-103.661751",      
    iconset: "4c",
    concise: false,
    forecastLayout: "tiled"
  }
},

		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "JW",
						url: "https://www.jw.org/es/noticias/testigos-de-jehova/rss/NewsSubsectionRSSFeed/feed.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
  {
    module: "MMM-Wallpaper",
    position: "fullscreen_below",
    config: { // See "Configuration options" for more information.
      source: "bing",
      slideInterval: 60 * 1000 // Change slides every minute
    }
  },
    {
      module: 'MMM-CalendarExt',
      position: "top_center",
      config: {
        system: {
          show: ["Holidays", "upcoming"],
          locale: 'en',
          redrawInterval:60000,
        },
        views: {
          Holidays: {
            position:'bottom_bar',
            counts:7,
          },
          upcoming: {
            position:'top_left',
            limit:5
          },
        },
        defaultCalendar: {
          maxEntries:50,
          maxDays:180,
          interval: 1000*60*5,
        },
        calendars :[
          {
            name: "Holidays",
            symbol: "calendar-o",
            styleName: "style1",
            url: "https://calendar.google.com/calendar/ical/trabajoonline043%40gmail.com/public/basic.ics"
          },
        ],
      }
    }
	]
};

and I do as the guide says to extract the git
cd ~ / MagicMirror / modules
git clone https://github.com/eouia/MMM-CalendarExt.git
and I do all the steps of the installer.

chrixbrown

@djboob66 and this is all correct it is at the moment I put the module in my configuration it makes me as if I did not have internet and when I do it it puts my normal magic mirror again

chrixbrown

@djboob66 and when I edit I always use the visual studio code editor and I also use the raspi editor

sdetweil

@chrixbrown can u look at the messages where u start MM

npm start
or
pm2

if pm2, then the command

pm2 logs --lines=100

will show you the output

if U need to minimize the MM screen, alt-spacebar-n will do that (same as on Windows)

DJBOOB66

@chrixbrown

I am doing my configurations in virtual box and if I have everything correct I do not know why it gives me that error.

So the magic mirror is not running on a pi but a pc runing virtual box with pi OS??

sdetweil

@djboob66 i install on a PI OS x86 under VMware to test, so it should work…

I don’t think the VM has anything to do with it…
this is one of the MM modules that is missing some required libraries that were removed in 2.16

valid-url
rrule-alt
and request

the startup messages for MM should say

module not found

and then MM doesn’t start

chrixbrown

@sdetweil to already this module no longer works?

sdetweil

@chrixbrown no. u need to look at the messages so we can figure out what to do