MMM-CalendarExt the mirror knocks me down?

[chrixbrown]

@chrixbrown this is how it gets me with the module

and without the module

[DJBOOB66]

@chrixbrown said in MMM-CalendarExt the mirror knocks me down?:

@chrixbrown

So you do have VNC on your PC as well?
you have added configs to the config.js file???

And MMM-CalendarExt will not load on your mirror just keeps saying LOADING is this the case?
Have you added your details to CalendarExt?
Can you post your config here?
have you connected Pi OS to the internet???

[chrixbrown]

@djboob66 I am doing my configurations in virtual box and if I have everything correct I do not know why it gives me that error.

let config = {
	address: "0.0.0.0",	// default is "localhost"
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
    module: 'MMM-Remote-Control',
    // position: 'bottom_left',
    config: {
        customCommand: {
			        shutdownCommand: 'shell command to shutdown your pc',
        rebootCommand: 'shell command to reboot your pc',
        monitorOnCommand: 'shell command to turn on your monitor',
        monitorOffCommand: 'shell command to turn off your monitor',
        monitorStatusCommand: 'shell command to return status of monitor, must return either "HDMI" or "true" if screen is on; or "TV is Off" or "false" if it is off to be recognized'
		},  // Optional, See "Using Custom Commands" below
        showModuleApiMenu: true, // Optional, Enable the Module Controls menu
        secureEndpoints: true, // Optional, See API/README.md
        customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below
        apiKey: "bc2e979db92f4741afad01d5d18eb8e2", // Optional, See API/README.md for details
        classes: {
			"Any Name You Want": {
            hide: ["calendar"],
            show: ["newsfeed"],
            toggle: ["clock"],
        },
        "Another Name You Want": {
            hide: ["newsfeed"],
            show: ["calendar"],
        },
		} // Optional, See "Custom Classes" below
    }
},
		{
			module: "alert",
		},
		{
		module: "clock",
		position: "top_left",	// This can be any of the regions.
		config: {
			displaySeconds: "true",
			displayType: "both", //digital, analog, or both}
			clockBold: "true"
		}
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "https://calendar.google.com/calendar/ical/trabajoonline043%40gmail.com/public/basic.ics"					}
				]
			}
		},
				{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "Gering",
				locationID: "5695604", 
				apiKey: "220ba692d61b02e41ea809571c2ff06e"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Gering",
				locationID: "5695604", 
				apiKey: "220ba692d61b02e41ea809571c2ff06e"
			}
		},
		{
  module: "MMM-OpenWeatherMapForecast",
  header: "Weather",
  position: "top_right",
  classes: "default everyone",
  disabled: false,
  config: {
    apikey: "220ba692d61b02e41ea809571c2ff06e",
    latitude: "41.821541",
    longitude: "-103.661751",      
    iconset: "4c",
    concise: false,
    forecastLayout: "tiled"
  }
},

		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "JW",
						url: "https://www.jw.org/es/noticias/testigos-de-jehova/rss/NewsSubsectionRSSFeed/feed.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
  {
    module: "MMM-Wallpaper",
    position: "fullscreen_below",
    config: { // See "Configuration options" for more information.
      source: "bing",
      slideInterval: 60 * 1000 // Change slides every minute
    }
  },
    {
      module: 'MMM-CalendarExt',
      position: "top_center",
      config: {
        system: {
          show: ["Holidays", "upcoming"],
          locale: 'en',
          redrawInterval:60000,
        },
        views: {
          Holidays: {
            position:'bottom_bar',
            counts:7,
          },
          upcoming: {
            position:'top_left',
            limit:5
          },
        },
        defaultCalendar: {
          maxEntries:50,
          maxDays:180,
          interval: 1000*60*5,
        },
        calendars :[
          {
            name: "Holidays",
            symbol: "calendar-o",
            styleName: "style1",
            url: "https://calendar.google.com/calendar/ical/trabajoonline043%40gmail.com/public/basic.ics"
          },
        ],
      }
    }
	]
};

and I do as the guide says to extract the git
cd ~ / MagicMirror / modules
git clone https://github.com/eouia/MMM-CalendarExt.git
and I do all the steps of the installer.

[chrixbrown]

@djboob66 and this is all correct it is at the moment I put the module in my configuration it makes me as if I did not have internet and when I do it it puts my normal magic mirror again

[chrixbrown]

@djboob66 and when I edit I always use the visual studio code editor and I also use the raspi editor

[sdetweil]

@chrixbrown can u look at the messages where u start MM

npm start
or
pm2

if pm2, then the command

pm2 logs --lines=100 

will show you the output

if U need to minimize the MM screen, alt-spacebar-n will do that (same as on Windows)

[DJBOOB66]

@chrixbrown

I am doing my configurations in virtual box and if I have everything correct I do not know why it gives me that error.

So the magic mirror is not running on a pi but a pc runing virtual box with pi OS??

[sdetweil]

@djboob66 i install on a PI OS x86 under VMware to test, so it should work…

I don’t think the VM has anything to do with it…
this is one of the MM modules that is missing some required libraries that were removed in 2.16

valid-url
rrule-alt
and request

the startup messages for MM should say

module not found

and then MM doesn’t start

[chrixbrown]

@sdetweil to already this module no longer works?

[sdetweil]

@chrixbrown no. u need to look at the messages so we can figure out what to do