Magic Mirror - RTSP not integrated

BKeyport

@Laz If you’re using VLC, likely not. There’s too many programs being run to make it work.

plainbroke

@BKeyport said in Magic Mirror - RTSP not integrated:

@plainbroke https://github.com/MMRIZE/MMM-RTSP is where he kept his attempt.

It’s still there for now. :)

Hey,
I pulled that to my mirror but all I get is the header. Which tells me I have something wrong in my config file but, He did not put much for how to setup the config file… I know the module is working since it shows the header on my mirror, just not the actual rtsp of the camera.
Do you have time to show me what I need to setup in the config file?
Here is what I put in my config.js file.

{
        module: "MMM-RTSP",
        position: "middle_center",
        header: "RTSP - Garage",
        config: {
                streams: [
                {
                rtsp: "rtsp://admin:admin@192.168.1.35:554/live",
                }
                        ],
                        wsPort: 2000, // should be unique.
                        startStreamId: 1,
                }
},

BKeyport

@plainbroke sorry, unsupported due to excessive load on Pi.

I’d recommend something else. What that else is, I have no clue.

Laz

It turns out that, in principle, the RTSP module works in a mirror via VNC, but only if you do not dampen the screen (and sometimes overload the raspberry).
If you turn off the screen by the motion sensor, the RTSP module does not return the flow picture to the desired place…

So the stream from the remote camera cannot be connected correctly in the mirror? (((
Especially if there is a desire to extinguish the screen in the long-term absence of movement near the mirror…

Laz

Tell me what I’m doing wrong?
I installed the old version of OS Raspberry 10.13, installed a mirror with standard modules, and installed the MMM-RTSPStream module. Made camera settings. If I choose a VLC player, then I hear sound from the camera, there are Stream1 in tasks, but there is no video in the module frame. When choosing other players (OMX and ffmpeg), there is no video either.
Although I have the same settings for this module and with a VLC player on another flash drive with the latest version of OS, the video raspberry works. But it happens that when the raspberry is rebooted, the video stream does not always fall into the module frame.