New Setup - Log Filled with "CreatePlatformSocket() failed: Address family not supported by protocol (97)"

[MMRIZE]

@butchkemper
Usually that error message happens on socket stream fails but could not know where it depends with only that log.

My suggestion;
Run only default modules; happens again?

• If not, add 3rd party modules one by one and test each time. You might find the suspicious module.
• If so, reinstall fresh MM; then try above method.

Still happens even with fresh MM, update your OS and dependencies. And test again.

The last method would be to format your sd card then reinstall OS itself. If still error happens; I have no way…

Wish you a luck.

[sdetweil]

@butchkemper I am testing the automated install on a new flashed sd card now , with the 5/23 32 bit image

[sdetweil]

@butchkemper I installed with my automated script and all is working as expected. I added my MMM-Config module which uses socketio to the backend form and it works without problem…

as a test

rename your MagicMirror folder to some other name
and then run the automated install script… see
https://github.com/sdetweil/MagicMirror_scripts

pi@raspberrypi:~/MagicMirror/config $ uname -a
Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr  3 17:20:52 BST 2023 armv7l GNU/Linux
pi@raspberrypi:~/MagicMirror/config $ lsb_release -a
No LSB modules are available.
Distributor ID:	Raspbian
Description:	Raspbian GNU/Linux 11 (bullseye)
Release:	11
Codename:	bullseye
pi@raspberrypi:~/MagicMirror/config $ node -v
v16.20.0
pi@raspberrypi:~/MagicMirror/config $ npm -v
8.19.4
pi@raspberrypi:~/MagicMirror/config $ 

[butchkemper]

@sdetweil

Sam,

I did a complete new MM install using your automated scripts and found the error message is still issued.

I found the error messages correlate to modules making network requests for data updates.

My next step is to build a SDcard and see what happens.

Thank you for your assistance.

Butch

[sdetweil]

@butchkemper let us know how it goes…

[butchkemper]

Sam,

I built a new SDcard for Raspios and installed MM using your scripts. Started MM and the problem did not occur.

Next, I rebuilt the SSD with Raspios and installed MM. Started MM and the problem did not occur at startup and I waited while tailing the logs but nothing happened.

Next, I move my MM configuration changes, modules, and updates to the SSD. The problem did not occur at startup or after tailing the logs for a time.

I am declaring a victory for me. But we all know, in the end, that the computer demons won.

Butch

[sdetweil]

@butchkemper awesome… the demons are everywhere! lol