MMM-RandomQuranAyah

[slametps]

@zam said in MMM-RandomQuranAyah:

Jazakallah , if you can please try to implement a Module for ADAN it will be very usefull :)

@zam It is available now, MMM-PrayerTime for displaying praying time with adhan recital.

[zam]

@slametps Wonderfull Let me try first , Sukran Jaseelan :)

[slametps]

@zam you’re welcome.

[zzaidi148]

@slametps I tried setting up this module put it doesnt allow my magic mirror to work. I downloaded the module, put the config in my config.js and got a failed config. I put it in jshint and found nothing. Below is my config. Please help. Thank You.

modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' /
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		{
			module: "updatenotification",
			position: "top_bar",
		},

		{
			module: "clock",
			position: "top_left",
		},

[slametps]

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps I tried setting up this module put it doesnt allow my magic mirror to work. I downloaded the module, put the config in my config.js and got a failed config. I put it in jshint and found nothing. Below is my config. Please help. Thank You.

modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' /
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		{
			module: "updatenotification",
			position: "top_bar",
		},

		{
			module: "clock",
			position: "top_left",
		},

You should remove update_notification module (or change the location) because it override the same location.

[zzaidi148]

@slametps Tried that but still didn’t load up magic mirror

[slametps]

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps Tried that but still didn’t load up magic mirror

Can you post the pm2 or MM log?

[zzaidi148]

@slametps I’m a noob at this but this is the log on my terminal:

> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Sockets connected & modules started ...
Launching application.

[slametps]

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps I’m a noob at this but this is the log on my terminal:

> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Sockets connected & modules started ...
Launching application.

What you got on the screen? Pls post the screen capture here.

[zzaidi148]

@slametps it just said to recheck your config

[slametps]

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps it just said to recheck your config

Can you post your whole config? It seems your config is the problem.

[slametps]

@slametps said in MMM-RandomQuranAyah:

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps it just said to recheck your config

Can you post your whole config? It seems your config is the problem.

There is character / after config ApiVersion. Pls remove it.

[zzaidi148]

@slametps I took the character off but still something wrong

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */
var config = {

	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' 
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		
		{
			module: "clock",
			position: "top_left",
		},

		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
					symbol: "calendar-check-o",
					url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics",
					}
				]
			}
		},
		
		{
			module: "compliments",
			position: "lower_third",
		},
		
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "private",
			}
		},
		
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "",
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					},
					{
						title: "ESPN",
						url: "http://www.espnfc.com/english-premier-league/23/rss"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
            	        module: 'MMM-GoogleMapsTraffic',
			position: 'top_left',
            		config: {
                	   key: '',
                	   lat: 33.033184,
                	   lng: -96.625225,
                	   height: '350px',
                	   width: '400px',
            	        }
        	},
		]
		};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[slametps]

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps I took the character off but still something wrong

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */
var config = {

	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' 
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		
		{
			module: "clock",
			position: "top_left",
		},

		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
					symbol: "calendar-check-o",
					url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics",
					}
				]
			}
		},
		
		{
			module: "compliments",
			position: "lower_third",
		},
		
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "private",
			}
		},
		
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "",
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					},
					{
						title: "ESPN",
						url: "http://www.espnfc.com/english-premier-league/23/rss"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
            	        module: 'MMM-GoogleMapsTraffic',
			position: 'top_left',
            		config: {
                	   key: '',
                	   lat: 33.033184,
                	   lng: -96.625225,
                	   height: '350px',
                	   width: '400px',
            	        }
        	},
		]
		};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

There is missing character comma (,) after apiVersion: '1.0'.

[zzaidi148]

@slametps Alhumdulillah, actually worked! Is there any way to change the translation beside en.yusufali in english. Also, my arabic font is different from your screenshot. How do I get your arabic font? Thank you so much!

[slametps]

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps Alhumdulillah, actually worked! Is there any way to change the translation beside en.yusufali in english. Also, my arabic font is different from your screenshot. How do I get your arabic font? Thank you so much!

Complete translation option can be found at http://api.alquran.cloud/edition. My shot is a browser capture, not actual MM capture and the font is indeed different.
Actual result is like this:
https://www.instagram.com/p/BR43DnDgG_r/.

[zzaidi148]

@slametps Thank You

[Gxnfr Ali]

@slametps that is my confis.js file…but prayer module does not work…cn u tell me error in config.js file???

/* Magic Mirror Config Sample
*

• By Michael Teeuw http://michaelteeuw.nl
• MIT Licensed.
  */

var config = {
port: 8080,
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses.

language: "en",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
	module: 'email',
            position: 'bottom_left',
            header: 'Email',
            config: {
                accounts: [
                   {
                        user: 'xxxxx@gmail.com',
                        password: 'xxxxx',
                        host: 'imap.gmail.com',
                        port: 993,
                        tls: true,
                        authTimeout: 10000,
                        numberOfEmails: 2,
                    },
                ],
                fade: true,
                maxCharacters: 30
            }
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "PK Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check-o ",
					url: "webcal://www.officeholidays.com/ics/ics_country_code.php?iso=PK"
				}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "Dubai",
			locationID: "1166547",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "xxxxxxxxxxxxxxxxxxxxxxxxxxx"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "Dubai",
			locationID: "1166547",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
		}
	},
	{
		module: 'MMM-PrayerTime',
		position: 'top_left',
		config: {
			apiVersion: '1.0',
			lat: '30.6612',
			lon: '73.1086',
			timezone: 'Asia/Karachi',
			method: 4,
			playAdzan: ['fajr', 'dhuhr', 'asr', 'maghrib', 'isha'],
			notDisplayed: ['midnight', 'sunset'],
			useUpdateInterval: true,
			updateInterval: 86400 * 1000,
			animationSpeed: 2.5 * 1000,
			language: config.language,
			showAdzanAlert: true,
			alertTimer: 15000
			}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "Pakistan News",
					url: "https://news.google.com/news/rss/local?ned=en_pk&hl=en&gl=US"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

[Gxnfr Ali]

@slametps
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.

during prayer time module

[slametps]

@Gxnfr-Ali said in MMM-RandomQuranAyah:

@slametps
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.

during prayer time module

You can remove config item “language: config.language”. The module, by default using that config. It not working, you should try removing all modules config but PrayerTime.