MMM-RandomQuranAyah

slametps

@slametps I tried setting up this module put it doesnt allow my magic mirror to work. I downloaded the module, put the config in my config.js and got a failed config. I put it in jshint and found nothing. Below is my config. Please help. Thank You.
modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' /
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		{
			module: "updatenotification",
			position: "top_bar",
		},

		{
			module: "clock",
			position: "top_left",
		},

You should remove update_notification module (or change the location) because it override the same location.

zzaidi148

@slametps Tried that but still didn’t load up magic mirror

slametps

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps Tried that but still didn’t load up magic mirror

Can you post the pm2 or MM log?

zzaidi148

@slametps I’m a noob at this but this is the log on my terminal:

> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Sockets connected & modules started ...
Launching application.

slametps

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps I’m a noob at this but this is the log on my terminal:

> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Sockets connected & modules started ...
Launching application.

What you got on the screen? Pls post the screen capture here.

zzaidi148

@slametps it just said to recheck your config

slametps

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps it just said to recheck your config

Can you post your whole config? It seems your config is the problem.

slametps

@slametps said in MMM-RandomQuranAyah:

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps it just said to recheck your config

Can you post your whole config? It seems your config is the problem.

There is character / after config ApiVersion. Pls remove it.

zzaidi148

@slametps I took the character off but still something wrong

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */
var config = {

	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' 
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		
		{
			module: "clock",
			position: "top_left",
		},

		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
					symbol: "calendar-check-o",
					url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics",
					}
				]
			}
		},
		
		{
			module: "compliments",
			position: "lower_third",
		},
		
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "private",
			}
		},
		
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "",
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					},
					{
						title: "ESPN",
						url: "http://www.espnfc.com/english-premier-league/23/rss"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
            	        module: 'MMM-GoogleMapsTraffic',
			position: 'top_left',
            		config: {
                	   key: '',
                	   lat: 33.033184,
                	   lng: -96.625225,
                	   height: '350px',
                	   width: '400px',
            	        }
        	},
		]
		};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

slametps

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps I took the character off but still something wrong

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */
var config = {

	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
		module: 'MMM-RandomQuranAyah',
		position: 'top_bar',	
		config: {
			apiVersion: '1.0' 
			showArabic: true,
			showTranslation: true,
			surahArabicName:false,
			translationLang:'id.indonesian',
			updateInterval: 3600 * 1000, 
		}
		},
		{
			module: "alert",
		},

		
		{
			module: "clock",
			position: "top_left",
		},

		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
					symbol: "calendar-check-o",
					url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics",
					}
				]
			}
		},
		
		{
			module: "compliments",
			position: "lower_third",
		},
		
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "private",
			}
		},
		
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "Dallas",
				locationID: "4684888",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "",
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					},
					{
						title: "ESPN",
						url: "http://www.espnfc.com/english-premier-league/23/rss"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
            	        module: 'MMM-GoogleMapsTraffic',
			position: 'top_left',
            		config: {
                	   key: '',
                	   lat: 33.033184,
                	   lng: -96.625225,
                	   height: '350px',
                	   width: '400px',
            	        }
        	},
		]
		};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

There is missing character comma (,) after apiVersion: '1.0'.

zzaidi148

@slametps Alhumdulillah, actually worked! Is there any way to change the translation beside en.yusufali in english. Also, my arabic font is different from your screenshot. How do I get your arabic font? Thank you so much!

slametps

@zzaidi148 said in MMM-RandomQuranAyah:

@slametps Alhumdulillah, actually worked! Is there any way to change the translation beside en.yusufali in english. Also, my arabic font is different from your screenshot. How do I get your arabic font? Thank you so much!

Complete translation option can be found at http://api.alquran.cloud/edition. My shot is a browser capture, not actual MM capture and the font is indeed different.
Actual result is like this:
https://www.instagram.com/p/BR43DnDgG_r/.

zzaidi148

@slametps Thank You

Gxnfr Ali

@slametps that is my confis.js file…but prayer module does not work…cn u tell me error in config.js file???

/* Magic Mirror Config Sample
*

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
*/

var config = {
port: 8080,
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses.

language: "en",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
	module: 'email',
            position: 'bottom_left',
            header: 'Email',
            config: {
                accounts: [
                   {
                        user: 'xxxxx@gmail.com',
                        password: 'xxxxx',
                        host: 'imap.gmail.com',
                        port: 993,
                        tls: true,
                        authTimeout: 10000,
                        numberOfEmails: 2,
                    },
                ],
                fade: true,
                maxCharacters: 30
            }
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "PK Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check-o ",
					url: "webcal://www.officeholidays.com/ics/ics_country_code.php?iso=PK"
				}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "Dubai",
			locationID: "1166547",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "xxxxxxxxxxxxxxxxxxxxxxxxxxx"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "Dubai",
			locationID: "1166547",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
		}
	},
	{
		module: 'MMM-PrayerTime',
		position: 'top_left',
		config: {
			apiVersion: '1.0',
			lat: '30.6612',
			lon: '73.1086',
			timezone: 'Asia/Karachi',
			method: 4,
			playAdzan: ['fajr', 'dhuhr', 'asr', 'maghrib', 'isha'],
			notDisplayed: ['midnight', 'sunset'],
			useUpdateInterval: true,
			updateInterval: 86400 * 1000,
			animationSpeed: 2.5 * 1000,
			language: config.language,
			showAdzanAlert: true,
			alertTimer: 15000
			}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "Pakistan News",
					url: "https://news.google.com/news/rss/local?ned=en_pk&hl=en&gl=US"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

Gxnfr Ali

@slametps
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.

during prayer time module

slametps

@Gxnfr-Ali said in MMM-RandomQuranAyah:

@slametps
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.

during prayer time module

You can remove config item “language: config.language”. The module, by default using that config. It not working, you should try removing all modules config but PrayerTime.

Gxnfr Ali

@slametps
hi

Gxnfr Ali

@slametps i want add prayer module in our project…magicmirror

slametps

@Gxnfr-Ali said in MMM-RandomQuranAyah:

@slametps i want add prayer module in our project…magicmirror

What I ment earlier is disable all modules config except PrayerTime config to start debugging what made wrong if you’re sure that Prayer Time is the cause for your MM error. That is the only way to locate the error.

hrjmsh

Hi Slamet
I am having the following error on start up
Error: Cannot find module ‘async’
This makes the magic mirror go blank and disables keyboard commands. I disabled all other modules and corrected syntax errors in PrayerTime config lines as you described in previous posts.