`GLIBCXX_3.4.26' not found (required by node)

matt216

@sdetweil Unfortunately not. After reboot 2 electron processes preventing the upgrade-script from completing and pm2 commands fail without GLIBCXX version.

Appreciate the support here.

sdetweil

@matt216 ok, run this command string all one copy/paste and enter

sudo apt-get purge nodejs -y &&\
sudo rm -r /etc/apt/sources.list.d/nodesource.list &&\
sudo rm -r /etc/apt/keyrings/nodesource.gpg

matt216

@sdetweil Progress, thank you. After purging and removing those files, I ran the install script. It completes, but during the npm install step I notice:

E: Unable to correct problems, you have held broken packages.
node: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)

The script completes (but doesn’t give a npm version number, interestingly). I rebooted the pi and the mirror doesn’t start and pm2 command is not found.

sdetweil

@matt216 can u show me the output of

lsb_release -a
uname -a

and you ran MY install script, correct?

send me ~/install.log
my same userid at gmail

matt216

@sdetweil Your upgrade-script.sh yes, with force.

pi@magicmirror:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 10 (buster)
Release: 10
Codename: buster

pi@magicmirror:~ $ uname -a
Linux magicmirror 5.10.103-v7+ #1529 SMP Tue Mar 8 12:21:37 GMT 2022 armv7l GNU/Linux

No install.log in my home directory, sorry…

sdetweil

@matt216 ok, can you copy/paste, and execute this

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/node20_install.sh)”

matt216

@sdetweil Initially no such file or directory response so I removed the two sudo rm -r lines and ran again. Looked to complete successfully.
Rebooted.
Same state - mirror doesn’t start, pm2 commands not found.

matt216

@sdetweil I need to pick the boy up from nursery now. Will return tomorrow. Thanks loads for the support.
Matt

matt216

Going for a full fresh install. Did some googling on GLIBCXX and it looks terrifying. Seems particular to raspberry pis. It seems quite fundamental to the OS and people don’t recommend tinkering with it at all. Only advice out there seems to be “rebuild”.

sdetweil

@matt216 yes, it’s a tough problem .

backup your mm config
https://github.com/sdetweil/MagicMirror-backup-restore