MMM-Remote-Control

Dennis-010

@Dennis-010 sorry, don’t know what you mean ‘custom line’

Well, I started with:

monitorOnCommand: "echo 'on 0.0.0.0' | cec-client -s -d 1",

Then changd it to:

monitorOnCommand: 'xrandr -d :0 --output HDMI-1 --auto',

So I was wondering if there was a new “custom” line of code I can use. But u already said thast there might be no solution yet.

sdetweil

@Dennis-010 he had another post

yeah ! just found for wayland 
[3:58 PM]
for turn on: pi@raspberrypi:~ $ WAYLAND_DISPLAY=wayland-1 wlr-randr --output HDMI-A-2 --on
[3:58 PM]
for turn off: pi@raspberrypi:~ $ WAYLAND_DISPLAY=wayland-1 wlr-randr --output HDMI-A-2 --off

ankonaskiff17

@sdetweil Saw this and I maybe putting out old news because most people do
sudo raspi-config and then hit enter. Saw some text that appear to type in
sudo raspi-config nonint do_wayland <W1/W2> with

W1 - Use the X11 backend
W2 - Use the Wayland backend

Dennis-010

@sdetweil

That line infortunatly did not do the trick.

I used the revert option from @ankonaskiff17 to revert back to X11 and now the commands are working again.
Only thing now is: when monitor turns back on it’s set back to landscape instead of 90 degrees right portrait.

I remember seeing a fix for that somewhere, so I’ll be looking for that.

Jessendelft

@Dennis-010

Thanks for figuring all of this out. I also reverted back to the X11 window driver.
For completeness, just add --rotate right to the command:

customCommand: {  // Optional, See "Using Custom Commands" below
  monitorOnCommand: 'xrandr -d :0 --output HDMI-1 --auto --rotate right',
  monitorOffCommand: 'xrandr -d :0 --output HDMI-1 --off'
},