A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
MagicMirror Failing on Raspberry Pi Zero W Rev 1.1
-
@sdetweil And just to be thorough, here is my install.log. I don’t know what’s going on with those weird unicode characters in the log. And there are lots of “memory leak detected” that I don’t recall seeing back in May.
install starting - Thu Aug 1 11:35:10 EDT 2024 installing on armv6l processor system the os is Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye total used free shared buff/cache available Mem: 429 182 71 7 175 187 Swap: 99 5 94 [96mUpdating packages ...[0m Reading package lists... [91mUpdate failed, retrying installation ...[0m [96mInstalling helper tools ...[0m Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.9). curl is already the newest version (7.74.0-1.3+deb11u12). git is already the newest version (1:2.30.2-1+deb11u2). unzip is already the newest version (6.0-26+deb11u1). wget is already the newest version (1.21-1+deb11u1). wget set to manually installed. The following package was automatically installed and is no longer required: libfuse2 Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded. this should be a raspberry pi 02w increasing swap space computing size, want /var/swap=878MByte, checking existing: deleting wrong size file (104857600), generating swapfile ... of 878MBytes [96mCheck current Node installation ...[0m [93mNode.js is not installed.[0m [96mInstalling Node.js ...[0m Node release info = [38;5;79m2024-08-01 11:37:40 - Installing pre-requisites[0m Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... ca-certificates is already the newest version (20210119). curl is already the newest version (7.74.0-1.3+deb11u12). gnupg is already the newest version (2.2.27-2+deb11u2). The following package was automatically installed and is no longer required: libfuse2 Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: apt-transport-https 0 upgraded, 1 newly installed, 0 to remove and 39 not upgraded. Need to get 160 kB of archives. After this operation, 166 kB of additional disk space will be used. Get:1 http://mirror.umd.edu/raspbian/raspbian bullseye/main armhf apt-transport-https all 2.2.4 [160 kB] Fetched 160 kB in 1s (126 kB/s) Selecting previously unselected package apt-transport-https. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 106675 files and directories currently installed.) Preparing to unpack .../apt-transport-https_2.2.4_all.deb ... Unpacking apt-transport-https (2.2.4) ... Setting up apt-transport-https (2.2.4) ... Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Get:3 https://deb.nodesource.com/node_20.x nodistro InRelease [12.1 kB] Get:4 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages [8,776 B] Fetched 20.9 kB in 5s (3,822 B/s) Reading package lists... [1;34m2024-08-01 11:39:23 - Repository configured successfully.[0m [38;5;79m2024-08-01 11:39:23 - To install Node.js, run: apt-get install nodejs -y[0m [38;5;79m2024-08-01 11:39:23 - You can use N|solid Runtime as a node.js alternative[0m [1;32m2024-08-01 11:39:23 - To install N|solid Runtime, run: apt-get install nsolid -y [0m node 20.x version installer not available, doing manually Reading package lists... Building dependency tree... Reading state information... libstdc++6 is already the newest version (10.2.1-6+rpi1). The following package was automatically installed and is no longer required: libfuse2 Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded. using release tar file = node_release-v20.9.0.tar.gz node version is v20.9.0 [92mNode.js installation Done! version=v20.9.0[0m [96mCheck current NPM installation ...[0m [0mNPM currently installed. Checking version number. [0mMinimum npm version: [1mV10.1.0[0m [0mInstalled npm version: [1mV10.1.0[0m [92mNo npm upgrade necessary.[0m [96mCloning MagicMirror ...[0m [92mCloning MagicMirror Done![0m [96mInstalling dependencies ...[0m > magicmirror@2.28.0 postinstall > npm run install-vendor && npm run install-fonts && echo "MagicMirror² installation finished successfully! > " > magicmirror@2.28.0 install-vendor > echo "Installing vendor files ... > " && cd vendor && npm install --loglevel=error --no-audit --no-fund --no-update-notifier Installing vendor files ... added 10 packages in 1m > magicmirror@2.28.0 install-fonts > echo "Installing fonts ... > " && cd fonts && npm install --loglevel=error --no-audit --no-fund --no-update-notifier Installing fonts ... added 2 packages in 36s MagicMirror² installation finished successfully! > magicmirror@2.28.0 prepare > [ -f node_modules/.bin/husky ] && husky || echo no husky installed. no husky installed. added 433 packages in 19m 101 packages are looking for funding run `npm fund` for details [92mDependencies installation Done![0m package.json update for armv6l or Electron missing, completed ok setting up initial config.js [96mCheck plymouth installation ...[0m [96mSplashscreen: Checking themes directory.[0m [96mSplashscreen: Create theme directory if not exists.[0m [92mSplashscreen: Changed theme to MagicMirror successfully.[0m disable screensaver via gsettings was true and uint32 300 disable screensaver via lightdm.conf disable screensaver via lxsession install and setup pm2 pm2 not installed, installing pm2 install result (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (Use `node --trace-warnings ...` to show where the warning was created) (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit (node:2290) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxListeners() to increase limit added 138 packages in 3m get the pm2 platform specific startup command startup command = sudo env PATH=$PATH:/usr/local/bin /usr/local/lib/node_modules/pm2/bin/pm2 startup systemd -u dvg --hp /home/dvg ------------- __/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____ _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___ _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__ _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___ _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____ _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________ _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________ _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_ _\///______________\///______________\///__\///////////////__ Runtime Edition PM2 is a Production Process Manager for Node.js applications with a built-in Load Balancer. Start and Daemonize any application: $ pm2 start app.js Load Balance 4 instances of api.js: $ pm2 start api.js -i 4 Monitor in production: $ pm2 monitor Make pm2 auto-boot at server restart: $ pm2 startup To go further checkout: http://pm2.io/ ------------- [PM2] Init System found: systemd Platform systemd Template [Unit] Description=PM2 process manager Documentation=https://pm2.keymetrics.io/ After=network.target [Service] Type=forking User=dvg LimitNOFILE=infinity LimitNPROC=infinity LimitCORE=infinity Environment=PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games:/usr/local/bin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin Environment=PM2_HOME=/home/dvg/.pm2 PIDFile=/home/dvg/.pm2/pm2.pid Restart=on-failure ExecStart=/usr/local/lib/node_modules/pm2/bin/pm2 resurrect ExecReload=/usr/local/lib/node_modules/pm2/bin/pm2 reload all ExecStop=/usr/local/lib/node_modules/pm2/bin/pm2 kill [Install] WantedBy=multi-user.target Target path /etc/systemd/system/pm2-dvg.service Command list [ 'systemctl enable pm2-dvg' ] [PM2] Writing init configuration in /etc/systemd/system/pm2-dvg.service [PM2] Making script booting at startup... [PM2] [-] Executing: systemctl enable pm2-dvg... Created symlink /etc/systemd/system/multi-user.target.wants/pm2-dvg.service → /etc/systemd/system/pm2-dvg.service. [PM2] [v] Command successfully executed. +---------------------------------------+ [PM2] Freeze a process list on reboot via: $ pm2 save [PM2] Remove init script via: $ pm2 unstartup systemd pm2 startup command done configure the pm2 config file for MagicMirror rename pm2 process in pm2_MagicMirror.json the user is not pi change pm2_MagicMirror.json now using this config file pm2_MagicMirror_new.json start MagicMirror via pm2 now save MagicMirror pm2 config now stop MagicMirror via pm2 now [92mWe're ready! Run [1m[97mpm2 start pm2[0m[92m from the ~/MagicMirror directory to start your MagicMirror.[0m install completed - Thu Aug 1 12:08:49 EDT 2024 -
@sdetweil I scoured the forums and found someone else complaining about electron being missing.
I ran this
sudo npm i -g npm@6and now it seems to be working fine. -
@davidgagne that makes no sense… the latest version of npm is 10.x
and you just installed v6… (maybe)do
npm -v
-
@davidgagne said in MagicMirror Failing on Raspberry Pi Zero W Rev 1.1:
MaxListenersExceededWarning: Possible EventEmitter memory
that is an npm bug… nothing we can do anything about. no impact on install
unicode… those are shell escape codes for color (the colors don’t show in the file, only on the actual console)
-
@sdetweil
npm -vreturns6.14.18(and it takes a solid 45 seconds to do that, which seems like a very long time for such a simple command, even on a Zero). -
@davidgagne do free -m
pi is small on memory, so running off sd card a lot…
-
@sdetweil I was wrong. It’s not working fine.
It was working fine. Then I rebooted to make sure everything was fine. Comes back up with no problem.
Then I ssh-ed to it, installed a module, ran
npm installinside the new module’s directory, executepm2 start MagicMirror, and now MM crashes again looking for electron.So frustrating.
-
@sdetweil Can I run
sudo npm i -g npm@10to upgrade to v10?Also: Can you help with getting my forum account upgraded so I don’t have all my posts queued for approval?
-
@davidgagne said in MagicMirror Failing on Raspberry Pi Zero W Rev 1.1:
pm2 start MagicMirror, and now MM crashes again looking for electron.
if you do
cd ~/MagicMirror npm startwhat happens?
-
@sdetweil Here is the output from
npm startcalled from within MM folder:> magicmirror@2.28.0 start /home/dvg/MagicMirror > ./run-start.sh $1 [2024-08-01 14:22:15.896] [LOG] Starting MagicMirror: v2.28.0 [2024-08-01 14:22:17.801] [LOG] Loading config ... [2024-08-01 14:22:17.876] [LOG] config template file not exists, no envsubst [2024-08-01 14:22:37.345] [LOG] Loading module helpers ... [2024-08-01 14:22:37.587] [LOG] No helper found for module: alert. [2024-08-01 14:22:39.311] [LOG] Initializing new module helper ... [2024-08-01 14:22:39.627] [LOG] Module helper loaded: updatenotification [2024-08-01 14:22:39.840] [LOG] No helper found for module: clock. [2024-08-01 14:22:40.776] [LOG] Initializing new module helper ... [2024-08-01 14:22:40.933] [LOG] Module helper loaded: mmm-systemtemperature [2024-08-01 14:22:41.119] [LOG] No helper found for module: compliments. [2024-08-01 14:22:41.252] [LOG] No helper found for module: weather. [2024-08-01 14:22:41.370] [LOG] No helper found for module: weather. [2024-08-01 14:22:41.440] [LOG] No helper found for module: weather. [2024-08-01 14:22:41.542] [LOG] All module helpers loaded. [2024-08-01 14:22:43.350] [LOG] Starting server on port 8080 ... [2024-08-01 14:22:44.452] [WARN] You're using a full whitelist configuration to allow for all IPs [2024-08-01 14:22:46.725] [LOG] Server started ... [2024-08-01 14:22:46.942] [LOG] Connecting socket for: updatenotification [2024-08-01 14:22:47.186] [LOG] Starting module helper: updatenotification [2024-08-01 14:22:47.362] [LOG] Connecting socket for: mmm-systemtemperature [2024-08-01 14:22:47.504] [LOG] Starting node helper: mmm-systemtemperature [2024-08-01 14:22:47.554] [LOG] Sockets connected & modules started ... [2024-08-01 14:22:47.633] [INFO] >>> Ready to go! Please point your browser to: http://0.0.0.0:8080 <<< Starting chromium browser now, have patience, it takes a minute Chromium_browser not installed ./run-start.sh: line 79: 11125 Killed node serveronly
