Problem Adding Buttons & required Remote-Control Modules

sdetweil · Sep 18, 2024, 7:34 PM

@awwbaker said in Problem Adding Buttons & required Remote-Control Modules:

[2024-09-16 15:04:01.418] [LOG] Initialize button monitor_control on PIN 25
[2024-09-16 15:04:01.419] [LOG] MMM-Buttons: RPi model Raspberry Pi 5 Model B Rev 1.0
[2024-09-16 15:04:01.419] [LOG] MMM-Buttons: RPi5 detected
[2024-09-16 15:04:01.433] [LOG] Initialize button power on PIN 24
[2024-09-16 15:04:01.434] [LOG] MMM-Buttons: RPi model Raspberry Pi 5 Model B Rev 1.0
[2024-09-16 15:04:01.434] [LOG] MMM-Buttons: RPi5 detected

did you test to make sure the buttons work outside MM?

MarcLandis · Sep 20, 2024, 4:11 PM

@awwbaker

it seems that the MMM-Jast module is throwing the error:

[2024-09-16 15:04:00.408] [ERROR] ReferenceError: Log is not defined
at Object. (/home/awwbaker/MagicMirror/modules/MMM-Jast/MMM-Jast.js:14:6243)

sdetweil · Sep 20, 2024, 6:56 PM

@MarcLandis its because MagicMirror-remote-control is doing a require() on the module js

awwbaker · Sep 20, 2024, 8:30 PM

Mr @sdetweil
I tested my button press using:

import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)
GPIO.setup(6, GPIO.IN, pull_up_down=GPIO.PUD_UP)

while True:
input_state = GPIO.input(6)
if input_state == False:
print(‘Button Pressed’)
time.sleep(0.2)

That worked fine. I found the module MMM-ModuleToggleButton which seemed a bit simpler and directly what wanted to do. The demo script used GPIO 6 so used default. Do i need to use a pull_down resister? Thank Thank you again! VR Anthony

PS: Sam I looked for a link to buy you a cup of coffee, not found, but if you have one, please forward?

awwbaker · Sep 20, 2024, 9:20 PM

Mr @sdetweil, I also noted the below error ? Thank you!

[2024-09-20 16:36:07.413] [LOG] Sockets connected & modules started …
[2024-09-20 16:36:10.523] [LOG] Launching application.
[2024-09-20 16:36:15.920] [INFO] System information:

SYSTEM: manufacturer: ; model: ; raspberry: undefined; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.47+rpt-rpi-v8

VERSIONS: electron: 31.1.0; used node: 20.14.0; installed node: 22.9.0; npm: 10.8.3; pm2: 5.4.1

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[2024-09-20 16:36:20.989] [ERROR] Whoops! There was an uncaught exception…
[2024-09-20 16:36:21.019] [ERROR] Error: EINVAL: invalid argument, write
at Object.writeFileSync (node:fs:2346:20)
at exportGpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:18:8)
at new Gpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:172:36)
at Class.socketNotificationReceived (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_helper.js:20:22)
at Socket. (/home/awwbaker/MagicMirror/js/node_helper.js:98:11)
at Socket.emit (node:events:519:28)
at Socket.emitUntyped (/home/awwbaker/MagicMirror/node_modules/socket.io/dist/typed-events.js:69:22)
at /home/awwbaker/MagicMirror/node_modules/socket.io/dist/socket.js:704:39
at process.processTicksAndRejections (node:internal/process/task_queues:77:11) {
errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}
[2024-09-20 16:36:21.022] [ERROR] MagicMirrorÂ² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[2024-09-20 16:36:21.027] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues
[2024-09-20 16:36:21.066] [LOG] Create new calendarfetcher for url: http://p134-caldav.icloud.com/published/2/ODY3MDc3ODQxODY3MDc3OIsPCPqyTd7gfFTuhUgnU3E8veSROaMD9lC0bXMqbeTrcdUcRFgL2q0GROkcc6XtdbepSRYxUGbDtoDb3se2UkE - Interval: 604800000
[2024-09-20 16:36:21.372] [LOG] Create new calendarfetcher for url: http://p134-caldav.icloud.com/published/2/ODY3MDc3ODQxODY3MDc3OIsPCPqyTd7gfFTuhUgnU3HnE0ZEnCaHErJrwvkzJ3o- -

sdetweil · Sep 20, 2024, 9:47 PM

@awwbaker ps: i don’t accept coffee etc. i do this because i truly enjoy it.
i love the challenge, the great people here, and the fascinatingly huge amount of differences among all your designs.

sdetweil · Sep 20, 2024, 9:51 PM

@awwbaker on the write

see second post here

https://forums.raspberrypi.com/viewtopic.php?t=367431

awwbaker · Sep 21, 2024, 5:44 PM

Dear Mr @sdetweil
I think you are teaching me to fish…Did you see the error message below? Beyond the below, I booted the RPI 3B+, ran the “pinctrl set 6 op dl” command. Started MM and as previously the expected modules were hidden on start up. Pressing pushbutton did not have any affect on the display. I ran the button.py script and the button was sensed as previous. As your time permits I could use another push. Your efforts are VERY appreciated. VR Anthony Baker

2024-09-21 13:33:31.232] [LOG] Connecting socket for: MMM-MktIndex
[2024-09-21 13:33:31.234] [LOG] Sockets connected & modules started …
[1856:0921/133334.081312:ERROR:object_proxy.cc(576)] Failed to call method: org.freedesktop.DBus.StartServiceByName: object_path= /org/freedesktop/DBus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[2024-09-21 13:33:35.622] [LOG] Launching application.
[2024-09-21 13:33:55.076] [INFO] System information:

SYSTEM: manufacturer: ; model: ; raspberry: undefined; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.47+rpt-rpi-v8

VERSIONS: electron: 31.1.0; used node: 20.14.0; installed node: 22.9.0; npm: 10.8.3; pm2:

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[2024-09-21 13:33:58.321] [ERROR] Whoops! There was an uncaught exception…
[2024-09-21 13:33:58.343] [ERROR] Error: EINVAL: invalid argument, write
at Object.writeFileSync (node:fs:2346:20)
at exportGpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:18:8)
at new Gpio (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_modules/onoff/onoff.js:172:36)
at Class.socketNotificationReceived (/home/awwbaker/MagicMirror/modules/MMM-ModuleToggleButton/node_helper.js:20:22)
at Socket. (/home/awwbaker/MagicMirror/js/node_helper.js:98:11)
at Socket.emit (node:events:519:28)
at Socket.emitUntyped (/home/awwbaker/MagicMirror/node_modules/socket.io/dist/typed-events.js:69:22)
at /home/awwbaker/MagicMirror/node_modules/socket.io/dist/socket.js:704:39
at process.processTicksAndRejections (node:internal/process/task_queues:77:11) {
errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}
[2024-09-21 13:33:58.345] [ERROR] MagicMirrorÂ² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[2024-09-21 13:33:58.347] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues
[1976:0921/133401.533219:ERROR:gl_utils.cc(424)] [.WebGL-0x34004b5b00]GL Driver Message (OpenGL, Performance, GL_CLOSE_PATH_NV, High): GPU stall due to ReadPixels
[2024-09-21 13:34:01.636] [LOG] Create new calendarfetcher for url: http://p134-caldav.icloud.com/published/2/ODY3MDc3ODQxODY3MDc3OIsPCPqyTd7gfFTuhUgnU3E8veSROaMD9lC0bXMqbeTrcdUcRFgL2q0GROkcc6XtdbepSRYxUGbDtoDb3se2UkE - Interval: 604800000

sdetweil · Sep 21, 2024, 9:58 PM

@awwbaker i am on my phone, i can’t edit, and it wants to quote whole thing .

the os has changed the rules

i posted a response the other day to a topic that had some workarounds without coding changes

awwbaker · Sep 22, 2024, 3:44 PM

Dear Mr @sdetweil
Please see above, it seems “on-off” is throwing errors. It seems it is used by Remote-Control-Modules as well as Buttons. I wnet back and tried buttons. The error is below: Thank you very much. Anthony

[2024-09-22 11:34:50.557] [LOG] Launching application.
[2024-09-22 11:35:05.029] [ERROR] ERROR! Could not validate main module js file.
[2024-09-22 11:35:05.037] [ERROR] ReferenceError: Log is not defined
at Object. (/home/awwbaker/MagicMirror/modules/MMM-RAIN-MAP/MMM-RAIN-MAP.js:28:158622)
at Module._compile (node:internal/modules/cjs/loader:1373:14)
at Module._extensions…js (node:internal/modules/cjs/loader:1432:10)
at Module.load (node:internal/modules/cjs/loader:1215:32)
at Module._load (node:internal/modules/cjs/loader:1031:12)
at c._load (node:electron/js2c/node_init:2:17025)
at Module.require (node:internal/modules/cjs/loader:1240:19)
at require (node:internal/modules/helpers:179:18)
at Class.loadModuleDefaultConfig (/home/awwbaker/MagicMirror/modules/MMM-Remote-Control/node_helper.js:314:30)
at /home/awwbaker/MagicMirror/modules/MMM-Remote-Control/node_helper.js:268:26
at FSReqCallback.oncomplete (node:fs:198:5)
[2024-09-22 11:35:05.689] [INFO] System information:

SYSTEM: manufacturer: ; model: ; raspberry: undefined; virtual: false

OS: platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.6.47+rpt-rpi-v8

VERSIONS: electron: 31.1.0; used node: 20.14.0; installed node: 22.9.0; npm: 10.8.3; pm2:

OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined

[2024-09-22 11:35:13.286] [LOG] Initialize button monitor_control on PIN 6
[2024-09-22 11:35:13.293] [ERROR] Whoops! There was an uncaught exception…
[2024-09-22 11:35:13.318] [ERROR] Error: EINVAL: invalid argument, write
at Object.writeFileSync (node:fs:2346:20)
at exportGpio (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_modules/onoff/onoff.js:18:8)
at new Gpio (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_modules/onoff/onoff.js:172:36)
at Class.intializeButton (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_helper.js:74:19)
at Class.intializeButtons (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_helper.js:90:18)
at Class.socketNotificationReceived (/home/awwbaker/MagicMirror/modules/MMM-Buttons/node_helper.js:26:18)
at Socket. (/home/awwbaker/MagicMirror/js/node_helper.js:98:11)
at Socket.emit (node:events:519:28)
at Socket.emitUntyped (/home/awwbaker/MagicMirror/node_modules/socket.io/dist/typed-events.js:69:22)
at /home/awwbaker/MagicMirror/node_modules/socket.io/dist/socket.js:704:39
at process.processTicksAndRejections (node:internal/process/task_queues:77:11) {
errno: -22,
code: ‘EINVAL’,
syscall: ‘write’
}
[2024-09-22 11:35:13.335]