Need help with MMM-MQTTbridge not "communicating" with MMM-RTSPStream

[Cr4z33]

@sdetweil it’s OK mate and thanks for having tried to help me. :)

Let’s hope someone can come up with a working solution soon.

[sdetweil]

@Cr4z33 looking further at mqttbridge it also logs receipt of the notification from the subscription

so that tells me it did not receive info from mqtt

[Cr4z33]

@sdetweil I am not quite sure that I understood.

Are you saying it’s a module’s bug or is it needed further coding I should add (somewhere)?

[sdetweil]

@Cr4z33 im saying the module will report when it receives the mqtt info. it did not report. sooooo it did not receive the info

why i do not know

[Cr4z33]

@sdetweil hmmm I see.

I wonder if there’s actually another way to see the doorbell stream when the button is pressed?

There’s a button sensor entity for it in Home Assistant.

[sdetweil]

@Cr4z33 i dont know, but MQTTBridge was not informed of the button press as you expected

is your other bridge code running? you mentioned you had some app talking to the doorbell and publishing the mqtt message

is the doorbell an mqtt device , fed thru zigbee2mqtt for homeassistant?
or is there a native integration?
i would expect the doorbell to NOT publish to mqtt directly
it would be a tiny market to add and support that code IN the doorbell firmware

[sdetweil]

@Cr4z33 you could build an HA automation to send the MQTT message on button push

[Cr4z33]

@sdetweil said in Need help with MMM-MQTTbridge not "communicating" with MMM-RTSPStream:

@Cr4z33 you could build an HA automation to send the MQTT message on button push

But then again nothing would happen.

I mean I’ve already DahuaVTO2MQTT in the middle and I used the right line taken from its console, but here we are. 😅

[sdetweil]

@Cr4z33 something is not sending the mqtt message

bell -> ha automation -> mqtt -> mqttbridge -> rtsp…
should work

for me, this works

alexa-> nodered -> mqtt > ha automation -> mqtt -> mirror_app -> screen off

[Cr4z33]

@sdetweil said in Need help with MMM-MQTTbridge not "communicating" with MMM-RTSPStream:

@Cr4z33 something is not sending the mqtt message

bell -> ha automation -> mqtt -> mqttbridge -> rtsp…
should work

for me, this works

alexa-> nodered -> mqtt > ha automation -> mqtt -> mirror_app -> screen off

And you are using this MQTT module on the smart mirror or?

[sdetweil]

@Cr4z33 no, i wrote my own code for the mqtt integration

but its fundamentally doing the same thing, receiving an mqtt message and sending a notification to other code to act

[Cr4z33]

@sdetweil I see I wish I had the same skills to do ALL by myself lol!

However I wonder if I am the only person in the world having a smart video doorbell and MagicMirror?

I mean I haven’t found any universal solution to this in this forum, but just some modules for certain doorbell hardware like Ring, etc.

[sdetweil]

@Cr4z33 and the ring module talks directly to the ring doorbell

you should be able to use HA automation to get to mqttBridge, no fancy coding

automation trigger
device bell button push
action, more, command, mqtt publish

i have ring doorbell, and the module doesnt work for me
doesnt matter, as im hardly ever in front of the smartmirror when the doorbell rings
there is a ring2mqtt docker container, but again it really doesnt add anything useful

[Cr4z33]

@sdetweil and how would I get the broadcasting of the doorbell video feed?

Custom coding?

[sdetweil]

@Cr4z33 same rtspstream, that part of your solution didn’t change

button -> ha automation -> mqtt publish -> mqttbridge -> notification to rtspstream to open and connect video feed

altho you may have to use
https://github.com/evroom/MMM-MPlayer
instead of rtspstream module

and install MMM-ViewNotifications to see the events sent inside MagicMirror

[Cr4z33]

@sdetweil hmm I want to give it a try tomorrow morning (GMT+2).

Would you mind if I might contact you by PM just in case? 🥺

[sdetweil]

@Cr4z33 no problem. i am US Central UTC-5

[wishmaster270]

@Cr4z33
Hi and sorry fir the late reply…
Your config of the MQTT module is still missing a “debug: true”. The messages only get logged if debugging is enabled.

	{
		module: 'MMM-MQTTbridge',
		disabled: false,
		config: {
                        debug: true, 
			mqttServer: "mqtt://:@ipaddress:port",
			mqttConfig:
			{
				listenMqtt: true,
				interval: 500,
			},
			notiConfig:
			{
				listenNoti: true,
				ignoreNotiId: ["CLOCK_MINUTE", "NEWS_FEED"],
				ignoreNotiSender: ["system", "NEWS_FEED"],
			},
			// set "NOTIFICATIONS -> MQTT" dictionary at /dict/notiDictionary.js
			// set "MQTT -> NOTIFICATIONS" dictionary at /dict/mqttDictionary.js
			},
	}

[sdetweil]

@wishmaster270 yes, we covered that before
https://forum.magicmirror.builders/post/126008

[sdetweil]

@wishmaster270 i’ve come to the conclusion

the doorbell itself does not publish to mqtt
MqttBridge did not get any message from its subscribe

he is going to try to build a HomeAssistant automation, as it CAN see the doorbell button thru its integration