Default Calendar module frequently refreshes

michaelarnauts

I just made this github issue to track this issue.

https://github.com/MagicMirrorOrg/MagicMirror/issues/3971

sdetweil

@michaelarnauts I replied to it, but there you have a different complaint.

The system design is
Pull the iCal file via the URL
It’s whatever events the source calendar wants to send , we have no control , it’s all text

We convert that to a usable list
And then figure out the repeating events and get a list that could be displayed, expired and not , as of right this second

Then we send that list out to other modules to use
MMM-CalendarExt3 for example, which displays a wall cal view, using the events in view expired or not

Then we process the not expired list and display the xx that you wanted

And repeat that whole process for the next fetchInterval
Once every xx minutes or whatever you have it set to

For each URL configured , we do the exact same process, each sending events when they are fetched. One URL processor doesn’t know about the next, they ALL run independently

DarrenO 0

@sdetweil said in Default Calendar module frequently refreshes:

@DarrenO-0 thx. Id really like to see the logs from both for the event broadcast cycle

There was a big calendar parser change in. 33 and another coming in. 34

I’d upgraded to .33 in mid-Oct and had only upgraded Debian from 12 to 13 earlier this month but don’t recall noticing the issue prior to the OS upgrade.

i’ll see how i go with it under Debian 12 over the weekend and probably re-upgrade to Debian 13 early next week to then see if the issue re-presents itself.
Interestingly, the calendar that contains the most events is the one that was listed in the pm2 logs when the host was issue under Debian 13.
Now that the system is back under Debian 12, I’ll recheck the logs to see if the same notification in the pm2 logs is listed.

One item i also noted in the pm2 logs was it identified that pm2 was out of date and i need to upgrade.
I’m not 100% sure, but I think my MM is currently on 6.0.6, and 6.0.13 is the latest stable version available.
I did attempt to upgrade pm2 from the instructions at pm2.io using “npm install pm2@latest -g” or “sudo npm install pm2@latest -g” and though it appeared to upgrade, it always returned an error that “-g” was an unknown command or option.
When i then run pm2 --version, it still reported that i was running 6.0.6.

sdetweil

@DarrenO-0 on the pm2 side there are two parts

the code on the disk
and the part running

to change the part running
you need to execute

sudo pm2 updatePM2

sdetweil

@DarrenO-0 I rejected your post w the log entries, see the notification message I sent