Read the statement by Michael Teeuw here.
MMM-PIR-SENSOR Module GPIO-Settings
-
Hello,
finally got my MagicMirror running (will add some photos in the next few days) - next step is to activate the MMM-PIR-Module - but it seems that there is a small problem with my setup.As I did not want to see any electronics with my mirror on the wall I needed to hide the PIR Sensor. I decided not to use a PIR Sensor. Instead I got a microwave motion detector that is mounted behind the glass. It works perfectly through the glass regarding to the indicator LED on the board.
Now the problem is:
The output signal of the motion sensor is high if there is no motion detected and is low if motion is detected.I think the MMM-PIR Module switches the monitor on if the GPIO pin becomes high - so my display is always on.
is there a way to use my Sensor with the MMM-PIR-Module?
Thank you for any help
Jan-Christoph
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login