[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

evroom

@bill22
To be honest, I am lost, out of ideas.
I tried to get the module running myself again, but I cannot even get Bucks Bunny to eat his carrot.
I would need to setup MM completely new for it to work I guess.
At the moment you are left with the option of running it stand-alone using avm_stream, like I do

How where you thinking of using the module should it work?
Changing channels would still be a challenge, right?

bill22

@evroom

seems to be quite tricky with that stream…

But thank you for all your efforts so far and again great that we did it at least to run stand alone…!

You are right, channel changing options seems to be a limitation using avm_stream. I wonder if there is a way of “operating” the avm_stream, at least to switch one particular channel/stream on and off without using the terminal…?

evroom

@bill22

I will look if there is a module that can trigger linux commands at will.
Would be interested in that myself.

bill22

@evroom

if we could find one, it could be probably used to start/stop the stream. On the other hand it could be an option to define several “stand alone streams” and call those individually. Position of the streams could be even offset to each other…Just a thought…

evroom

@bill22

Btw, do you “fancy” stuff like Voice Control or Alexa ?
I don’t, but those would be modules that could trigger something.

bill22

@evroom
me neither

evroom

@bill22

Hi,

I used this Sunday to setup a second Pi, whilst watching F1.
Used a new SD, installed Debian Buster and Magic Mirror v2.8.0.

After I made sure I did not have any errors after rebooting, restarting MM, etc, I setup MMM-RTSPStream.
It now works for Bucks Bunny, my IP cam and my SAT receiver.
I can even rotate 2 SAT channels.

I also tested the little fix with --audio_queue 4and that works to (although I cannot check audio, as I have no speaker).

It does not say that this method will work for you (my RTSP was dead as a dodo), but it could be something to consider.
I will play a bit with single quotes, double quotes, etc, as that is a potential problem in your URL.

And it still leaves the issue with selecting a channel at will, through a trigger.

bill22

@evroom

Hi and sorry for the late response.

Sounds pretty good and promising!

How do you “rotate” your SAT channels? Does it change based on time (after x seconds)?
For me it could be good enough to have a few channels to change, of course better to select from a small list.

evroom

@bill22
In the config part add

rotateStreams: true,
rotateStreamTimeout: 60,

and add 2 or more streams (stream1 and stream2).

BKeyport

Silly question - is there a way within the RTSP protocal to detect when the camera detects motion, so you can trigger something? What I was thinking is to flash the screen background if the camera sees motion…

Thanks!