[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

Niggich

@xblackdemonx how you did this? I try everything… how is your config?

xblackdemonx

@Niggich Nothing special. Maybe reboot your cameras?

        module: 'MMM-RTSPStream',
        position: 'bottom_bar',
        config: {
            autoStart: true,
            rotateStreams: false,
            rotateStreamTimeout: 10,
            showSnapWhenPaused: false,
            moduleWidth: 354,
            moduleHeight: 240,
            stream1: {
                name: 'Salon',
                url: 'rtsp://192.168.1.2:554/unicast',
                snapshotUrl: '',
                snapshotRefresh: 10, // Seconds
                frameRate: "15",
                port: 9999,
           			 }
      		  }
 		   },

Niggich

@xblackdemonx ok, almost the same like my config. Just the Framerate is different. I change it like it is in your config and will see.

Drooneyef

I noticed the following:
When using omxplayer i also had a black screen instead of the camera image.
I removed the sd card and inserted it in a different raspberry.
Then everything was working fine.
The only difference between those 2 is the monitor connected to it.
It was working on a 7 inch monitor and on a 24 inch monitor it didn’t work.
The problem was the resolution.
Now the module is using stream2 and i changed in my Hikvision camera the resolution settings for stream2.
Now my mirror is working fine.
Maybe this is also a solution for you.

bhepler

I hope my configuration will help give you guys another possibility. I locked down my camera a bit with a username & password. So my configuration looks as so:

{
module: "MMM-RTSPStream",
    position: "bottom_left",
    config: {
          autostart: true,
          rotateStreams: false,
          showSnapWhenPaused: false,
          moduleWidth: 354,
          moduleHeight: 242,
          stream1: {
               name: 'Front Door',
               url: 'rtsp://[username]:[password]@10.0.0.25/cam1/mpeg4',
               port: 8027,
               shutdownDelay: 0,
               width: 352,
               height: 240,
               frameRate: "30"
               }
          }
}

Niggich

The stream works fine with the omx… finally, after 4 weeks playing…

Another question. Is any way to remove the little white Frame around video picture?

Drooneyef

@Niggich
What was the trick that made it work finally?

barnosch

@Niggich
Change the css file in the module folder like this

.MMM-RTSPStream .innerWrapper {
  position: relative;
  width: 352px; /* Video width + 2*border + 2*padding */
  height: 242px;
/*  border: 1px solid white; */   
  /*float: left;*/
  display: inline-block;
  text-align: center;
  margin: 15px;
}

the line “border: 1px solid white;” needs to be adujsted or uncommented like in my case

Niggich

@Drooneyef I put the port of my cam behind the IP-adress…

module: 'MMM-RTSPStream',
position: 'bottom_center',
config: {
		autoStart: true,
        rotateStreams: false,
        showSnapWhenPaused: false,
        moduleWidth: 704,
        moduleHeight: 240,
        moduleOffset: { top: 212, left: 0 },
        localPlayer: 'omxplayer',
        	stream1: {
                name: '',
                url: 'rtsp://192.168.113.125:554/live/ch1',
                shutdownDelay: 0,
                width: 320,
                height: 240,
                frameRate: "20",
                port: 9999,
			},
			stream2: {
                name: '',
                url: 'rtsp://192.168.113.103:554/live/ch1',
                shutdownDelay: 0,
                width: 320,
                height: 240,
                frameRate: "20",
                port: 10000,
			},

Niggich

@barnosch thx this works fine for me…