MMM-PIR-Sensor Guide with Edits and Updates

Feedy88

I am curious to know if there is a benefit by using the MM-Module for the PIR vs. the executable script which can be autostarted with pm2 (as per this tutorial). Can anyone help?

dubalda

@Fozi thank you for coming back to me. Here are the error messages I’m getting…apologies if it’s quite long! I unfortunately wasn’t able to upload the log file.

pi@pi:~/MagicMirror/modules/MMM-PIR-Sensor $ git pull
Updating be81cf0…d4831f2
Fast-forward
README.md | 14 ++++++++++++++
node_helper.js | 46 ++++++++++++++++++++++++++++++++++++++++++++±
2 files changed, 59 insertions(+), 1 deletion(-)
pi@pi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install

Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
electron-rebuild -e …/…/node_modules/electron

â Rebuild Failed

An unhandled error occurred inside electron-rebuild
make: Entering directory ‘/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi-2019/build’
CXX(target) Release/obj.target/wiringPi/src/addon.o
In file included from /home/pi/.electron-gyp/6.1.7/include/node/v8-internal.h:14,
from /home/pi/.electron-gyp/6.1.7/include/node/v8.h:25,
from …/src/addon.h:4,
from …/src/addon.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
declarator attribute((deprecated(message)))
^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8205:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
V8_DEPRECATE_SOON("Use WithData version.",
^~~~~~~~~~~~~~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
declarator attribute((deprecated(message)))
^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8214:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
V8_DEPRECATE_SOON("Use WithData version.",
^~~~~~~~~~~~~~~~~
In file included from …/src/addon.cc:1:
…/src/addon.h:12:28: error: ‘Handle’ is not a member of ‘v8’
bool HasInstance(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:12:44: error: expected primary-expression before ‘>’ token
bool HasInstance(v8::Handlev8::Value val);
^
…/src/addon.h:12:46: error: ‘val’ was not declared in this scope
bool HasInstance(v8::Handlev8::Value val);
^~~
…/src/addon.h:13:28: error: redefinition of ‘bool node::Buffer::HasInstance’
bool HasInstance(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:12:12: note: ‘bool node::Buffer::HasInstance’ previously defined here
bool HasInstance(v8::Handlev8::Value val);
^~~~~~~~~~~
…/src/addon.h:13:28: error: ‘Handle’ is not a member of ‘v8’
bool HasInstance(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:13:45: error: expected primary-expression before ‘>’ token
bool HasInstance(v8::Handlev8::Object val);
^
…/src/addon.h:13:47: error: ‘val’ was not declared in this scope
bool HasInstance(v8::Handlev8::Object val);
^~~
…/src/addon.h:14:22: error: ‘Handle’ is not a member of ‘v8’
char Data(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:14:38: error: expected primary-expression before ‘>’ token
char Data(v8::Handlev8::Value val);
^
…/src/addon.h:14:40: error: ‘val’ was not declared in this scope
char* Data(v8::Handlev8::Value val);
^~~
…/src/addon.h:15:22: error: redefinition of ‘char* node::Buffer::Data’
char* Data(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:14:13: note: ‘char* node::Buffer::Data’ previously defined here
char* Data(v8::Handlev8::Value val);
^~~~
…/src/addon.h:15:22: error: ‘Handle’ is not a member of ‘v8’
char* Data(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:15:39: error: expected primary-expression before ‘>’ token
char* Data(v8::Handlev8::Object val);
^
…/src/addon.h:15:41: error: ‘val’ was not declared in this scope
char* Data(v8::Handlev8::Object val);
^~~
…/src/addon.h:16:25: error: ‘Handle’ is not a member of ‘v8’
size_t Length(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:16:41: error: expected primary-expression before ‘>’ token
size_t Length(v8::Handlev8::Value val);
^
…/src/addon.h:16:43: error: ‘val’ was not declared in this scope
size_t Length(v8::Handlev8::Value val);
^~~
…/src/addon.h:17:25: error: redefinition of ‘size_t node::Buffer::Length’
size_t Length(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:16:14: note: ‘size_t node::Buffer::Length’ previously defined here
size_t Length(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:17:25: error: ‘Handle’ is not a member of ‘v8’
size_t Length(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:17:42: error: expected primary-expression before ‘>’ token
size_t Length(v8::Handlev8::Object val);
^
…/src/addon.h:17:44: error: ‘val’ was not declared in this scope
size_t Length(v8::Handlev8::Object val);
^~~
…/src/addon.cc: In function ‘void throw_error(v8::Isolate*, const char*, …)’:
…/src/addon.cc:35:90: error: no matching function for call to ‘v8::Exception::Error(v8::MaybeLocalv8::String)’
isolate->ThrowException(v8::Exception::Error(v8::String::NewFromUtf8(isolate, buffer)));
^
In file included from …/src/addon.h:4,
from …/src/addon.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:6538:23: note: candidate: ‘static v8::Localv8::Value v8::Exception::Error(v8::Localv8::String)’
static Local Error(Local message);
^~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:6538:23: note: no known conversion for argument 1 from ‘v8::MaybeLocalv8::String’ to ‘v8::Localv8::String’
make: *** [wiringPi.target.mk:147: Release/obj.target/wiringPi/src/addon.o] Error 1
make: Leaving directory ‘/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi-2019/build’
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack at ChildProcess.emit (events.js:198:13)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.118-v7l+
gyp ERR! command “/usr/bin/node” “/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/.bin/node-gyp” “rebuild” “–target=6.1.7” “–arch=arm” “–dist-url=https://www.electronjs.org/headers” “–build-from-source”
gyp ERR! cwd /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi-2019
gyp ERR! node -v v10.21.0
gyp ERR! node-gyp -v v6.1.0
gyp ERR! not ok

Failed with exit code: 1

Error: make: Entering directory ‘/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi-2019/build’
CXX(target) Release/obj.target/wiringPi/src/addon.o
In file included from /home/pi/.electron-gyp/6.1.7/include/node/v8-internal.h:14,
from /home/pi/.electron-gyp/6.1.7/include/node/v8.h:25,
from …/src/addon.h:4,
from …/src/addon.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
declarator attribute((deprecated(message)))
^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8205:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
V8_DEPRECATE_SOON("Use WithData version.",
^~~~~~~~~~~~~~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8config.h:326:49: warning: ‘MicrotasksCompletedCallback’ is deprecated [-Wdeprecated-declarations]
declarator attribute((deprecated(message)))
^
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:8214:3: note: in expansion of macro ‘V8_DEPRECATE_SOON’
V8_DEPRECATE_SOON("Use WithData version.",
^~~~~~~~~~~~~~~~~
In file included from …/src/addon.cc:1:
…/src/addon.h:12:28: error: ‘Handle’ is not a member of ‘v8’
bool HasInstance(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:12:44: error: expected primary-expression before ‘>’ token
bool HasInstance(v8::Handlev8::Value val);
^
…/src/addon.h:12:46: error: ‘val’ was not declared in this scope
bool HasInstance(v8::Handlev8::Value val);
^~~
…/src/addon.h:13:28: error: redefinition of ‘bool node::Buffer::HasInstance’
bool HasInstance(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:12:12: note: ‘bool node::Buffer::HasInstance’ previously defined here
bool HasInstance(v8::Handlev8::Value val);
^~~~~~~~~~~
…/src/addon.h:13:28: error: ‘Handle’ is not a member of ‘v8’
bool HasInstance(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:13:45: error: expected primary-expression before ‘>’ token
bool HasInstance(v8::Handlev8::Object val);
^
…/src/addon.h:13:47: error: ‘val’ was not declared in this scope
bool HasInstance(v8::Handlev8::Object val);
^~~
…/src/addon.h:14:22: error: ‘Handle’ is not a member of ‘v8’
char Data(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:14:38: error: expected primary-expression before ‘>’ token
char Data(v8::Handlev8::Value val);
^
…/src/addon.h:14:40: error: ‘val’ was not declared in this scope
char* Data(v8::Handlev8::Value val);
^~~
…/src/addon.h:15:22: error: redefinition of ‘char* node::Buffer::Data’
char* Data(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:14:13: note: ‘char* node::Buffer::Data’ previously defined here
char* Data(v8::Handlev8::Value val);
^~~~
…/src/addon.h:15:22: error: ‘Handle’ is not a member of ‘v8’
char* Data(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:15:39: error: expected primary-expression before ‘>’ token
char* Data(v8::Handlev8::Object val);
^
…/src/addon.h:15:41: error: ‘val’ was not declared in this scope
char* Data(v8::Handlev8::Object val);
^~~
…/src/addon.h:16:25: error: ‘Handle’ is not a member of ‘v8’
size_t Length(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:16:41: error: expected primary-expression before ‘>’ token
size_t Length(v8::Handlev8::Value val);
^
…/src/addon.h:16:43: error: ‘val’ was not declared in this scope
size_t Length(v8::Handlev8::Value val);
^~~
…/src/addon.h:17:25: error: redefinition of ‘size_t node::Buffer::Length’
size_t Length(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:16:14: note: ‘size_t node::Buffer::Length’ previously defined here
size_t Length(v8::Handlev8::Value val);
^~~~~~
…/src/addon.h:17:25: error: ‘Handle’ is not a member of ‘v8’
size_t Length(v8::Handlev8::Object val);
^~~~~~
…/src/addon.h:17:42: error: expected primary-expression before ‘>’ token
size_t Length(v8::Handlev8::Object val);
^
…/src/addon.h:17:44: error: ‘val’ was not declared in this scope
size_t Length(v8::Handlev8::Object val);
^~~
…/src/addon.cc: In function ‘void throw_error(v8::Isolate*, const char*, …)’:
…/src/addon.cc:35:90: error: no matching function for call to ‘v8::Exception::Error(v8::MaybeLocalv8::String)’
isolate->ThrowException(v8::Exception::Error(v8::String::NewFromUtf8(isolate, buffer)));
^
In file included from …/src/addon.h:4,
from …/src/addon.cc:1:
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:6538:23: note: candidate: ‘static v8::Localv8::Value v8::Exception::Error(v8::Localv8::String)’
static Local Error(Local message);
^~~~~
/home/pi/.electron-gyp/6.1.7/include/node/v8.h:6538:23: note: no known conversion for argument 1 from ‘v8::MaybeLocalv8::String’ to ‘v8::Localv8::String’
make: *** [wiringPi.target.mk:147: Release/obj.target/wiringPi/src/addon.o] Error 1
make: Leaving directory ‘/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi-2019/build’
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack at ChildProcess.emit (events.js:198:13)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.118-v7l+
gyp ERR! command “/usr/bin/node” “/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/.bin/node-gyp” “rebuild” “–target=6.1.7” “–arch=arm” “–dist-url=https://www.electronjs.org/headers” “–build-from-source”
gyp ERR! cwd /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi-2019
gyp ERR! node -v v10.21.0
gyp ERR! node-gyp -v v6.1.0
gyp ERR! not ok

Failed with exit code: 1
at SafeSubscriber._error (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/spawn-rx/lib/src/index.js:267:84)
at SafeSubscriber.__tryOrUnsub (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:205:16)
at SafeSubscriber.error (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:156:26)
at Subscriber._error (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:92:26)
at Subscriber.error (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:72:18)
at MapSubscriber.Subscriber._error (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:92:26)
at MapSubscriber.Subscriber.error (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:72:18)
at SafeSubscriber._next (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/spawn-rx/lib/src/index.js:242:65)
at SafeSubscriber.__tryOrUnsub (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:205:16)
at SafeSubscriber.next (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/rxjs/internal/Subscriber.js:143:22)
npm ERR! code ELIFECYCLE
npm ERR! errno 255
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: electron-rebuild -e ../../node_modules/electron
npm ERR! Exit status 255
npm ERR!
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2020-07-16T09_45_07_608Z-debug.log
[0_1595277021862_PIR-Sensor Error logs.txt](Uploading 100%)

Fozi

I‘d delete the module and re-install it. Obviously you haven’t changed any code (no info on stashing in the log). Your configuration will not be affected when you delete the module, it‘ll persist in config. js.

stop all processes with entering pm2 stop all.
cd to the module folder and enter: sudo rm -R MMM-PIR-Sensor. This will recursively remove the MMM-PIR-Sensor folder and it’s contents.
Re-install the module as described on GitHub. The installation build process should run through without errors.
Reboot

sdetweil

@Fozi rm -rf foldername will recursively remove all folders and content from foldername

sdetweil

@sdetweil looks like the wrong compiler level being used for the recompile.

dubalda

Thanks guys, sorry for the late response! It’s the summer holidays so I’ve been doing daddy day care. I’ll try removing the module and reinstalling it. I’ll keep you posted.

sebfas

@Feedy88
Works with out any problems, much better solution then MMM-PIR-Sensor.
Thanks

bugsounet

Please no ads of any of my modules
If no one respect this rules. I will make private it

sparxx

@bugsounet my apologies. I have deleted the post.

MMM-PIR-Sensor Guide with Edits and Updates

I am not a magician