MMM-Page-Selector: A page switcher that can set positions of modules

rudibarani

thank you very much for this fantastic module! I am trying to use MMM-Remote-Control to control the currently shown page through notifications which are sent via HTTP from my home automation (FHEM), depending on who is in the bathroom.

These two calls work fine with MMM-Page-Selector: (I had to insert a space into the URL when pasting it here as “&n” is replaced with a newline character by this website")

http://192.0.0.60:8080/remote?action=NOTIFICATION& notification=PAGE_UP

http://192.0.0.60:8080/remote?action=NOTIFICATION& notification=PAGE_DOWN

But i am struggling to use SELECT_PAGE to go directly to a desired page.

http://192.0.0.60:8080/remote?action=NOTIFICATION& notification=SELECT_PAGE&payload={"test"}

This call returns {"status":"success"}, but does not show the page “test”. Do you have an idea, what I am doing wrong?

Veldrovive

Hey @rudibarani,
Yea, that was completely on me. The new version should fix the issue. There was a really obvious bug that was stopping the PAGE_SELECT system from working. If it still does not work, make sure that the payload that is being sent is actually just the string name of the page and not an object.

rudibarani

@veldrovive Thank you very much for the quick fix! Now everything works like magic :man_mage:

I am putting a working example here for others, if they want to use MMM-Remote-Control with MMM-Page-Selector as well:

http://192.0.0.60:8080/remote?action=NOTIFICATION& notification=SELECT_PAGE&payload="test"

Veldrovive

As an update, it is now possible to have your pages automatically rotate on a certain interval. Refer to usage and configuration in the Readme.

Banandze

@Veldrovive thank you for reply! I will check the changes on the weekend. What shall I use to make weather data more structure? I want one module upper than another. I put first one upper in config file and wrote “top_left” for both modules but they are shown in wrong way. And another question about not swithing, I didn’t understand your question exactly. I turn ii on and it works four times, then it doesn’t swith and my screen becomes slightly darker, then after few munites it works again fout times.

Veldrovive

@Banandze,
I’m going to address the issue with the switching only working four times before shutting down. First, are you using pm2 to manage you mirror? If that is the case, try just starting it from a terminal instance so it does not automatically restart if it crashes.
When I said “Is there any output to the console”, what I meant is, in the terminal window where you started magic mirror, is there any text that prints out when the issues start? Also, in your electron instance, in the top menu, when you click on view then toggle developer tools, it will bring up a window with a console in it. If there is anything in red there I would like to see it.
What I am assuming is happening is that magic mirror itself is running out of resources and causing the issues.

I am not quite certain what you mean by:
“I put first one upper in config file and wrote “top_left” for both modules but they are shown in wrong way”
Are you saying that you want one module to appear above another, but it is instead appearing below? If that is the case then I will need to see your config again to know exactly what you mean and attempt to fix the problem.

Banandze

@Veldrovive I will try it on the weekend. Yes, you ynderstand me with the problem of appearing. There is my config

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "ru",
	timeFormat: 24,
	units: "metric",

	modules: [
                {
			"module": "MMM-Page-Selector",
			"position": "top_center",
			"config": {
				"defaultPage": "главная",
				"displayTitle": true,
				"selectPageNotif": [],
				"incrementPageNotif": [],
				"decrementPageNotif": []
			}
		},
                {
                   module: 'MMM-page-indicator',
                   position: 'bottom_bar',
                   "pages": "all",
                   config: {
                   pages: 6,
                   activeBright: true,
                   inactiveHollow: true,
                   }
                },
		{
     			module: "alert",
                        "pages": "all",
		},
                {
		module: 'MMM-PIR-Sensor',
	        "pages": "all",
           	config: {
                         sensorPIN: 22,
                         powerSaving: true,
                         powerSavingDelay: 120,
                        // See 'Configuration options' for more information.
		}
          	},
                {
                module:     'MMM-3Day-Forecast',
                position:   'top_right',
                "pages": {"главная": "top_right"},
         	config: {
		api_key:    '2f91769xxxxxxxxxxxxxxx',
		lat:        54.61972,
		lon:        39.740002,
		units:      'M',
		lang:       'ru',
		interval:   900000,
          	}
                },
                {
		module: "currentweather",
		position: "top_right",
                animationSpeed: 500,                     	// This can be any of the regions.
		"pages": {"погода": "top_left"},							// Best results in left or right regions.
		config: {
			// See 'Configuration options' for more information.
			location: "Рязань",
			locationID: "500096", //Location ID from http://openweathermap.org/help/city_list.txt
			appid: "ab3164xxxxxxxxxxxx" //openweathermap.org API key.
		}
            	},
                {
                module: "MMM-EARTH",
                position: "bottom_center",
                "pages": {"погода": "middle_center"},
                config: {
                mode: "Natural",
                rotateInterval: 5000,
                MaxWidth: "50%",
                MaxHeight: "50%",
                }
                },
                {
                module: "weatherforecast",
                position: "left",       // This can be any of the regions.
                colored: true,
                pages: {погода: "left"}, 
                config: {
                        // See 'Configuration options' for more information.
                        location: "Рязань",
                        locationID: "500096", //Location ID from http://openwea$
                        appid: "ab31646bxxxxxxxxxxxxx" //openweather
                }
                },
	        {
			module: "updatenotification",
			position: "top_bar",
                        "pages": "all",
	       	},
		{
			module: "clock",
			position: "top_left",
                        "pages":{"главная": "top_left", "погода": "top_left", "почта": "top_left", "новости": "top_left", "календарь": "top_left", "фото": "top_left" },
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
	                "pages": {"календарь": "upper-third"},	
                	config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics"
         				}
				]
			}
		},
		{
        		module: "newsfeed",
			position: "bottom_bar",
			"pages": {"главная": "bottom_bar", "новости": "bottom_bar"},
                        config: {
				feeds: [
					{
						title: "Финансовые новости MFD",
						url: "http://mfd.ru/rss/news/handler.ashx"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}                      
            	},
                {
			"module": "MMM-Cursor",
		},
	]

};

Veldrovive

@Banandze,
I’ll take a look at it. It is very possible that I made a mistake while refactoring and module precedence has been swapped.

Veldrovive

Changes that edit the way users must set up their config.js file have been made to this module. The position prop is no longer necessary to have inside the module config and the way to exclusions are handled has changed. For more information, look at the updated readme in the development branch of the GitHub page.
These changes will be merged into the master branch in a couple of days which will cause errors if your config is not updated.

rudibarani

Dear @Veldrovive,

would it be possible to add an option to make the current page persistent until the next page change?

I have to use cases where this would help:

if the Pi restarts, the Mirror always shows the standard page - no matter what page was active before the restart.
if you open the Mirror on a browser (e.g. mobile phone), you always see the standard page until the next page change happens.

In both cases, if would be great to see the currently “active” page. Maybe there is a way to store and restore the current page?

Thanks a lot for your active development of the module!