Read the statement by Michael Teeuw here.
MMM-AssistantMk2
-
@sean said in MMM-AssistantMk2 & MMM-GAction:
arecord --device plughw:1,0 -d 5 test.wav
-
@citizendevpi said in MMM-AssistantMk2 & MMM-GAction:
arecord --device plughw:1,0 -d 5 test.wav
That works? If so, you can set your config
record.device: "plughw:1,0",
-
@citizendevpi pi@raspberrypi:~ $ arecord -d 5 test.wav
Recording WAVE ‘test.wav’ : Unsigned 8 bit, Rate 8000 Hz, Mono
pi@raspberrypi:~ $ arecord -l)
bash: syntax error near unexpected token)' pi@raspberrypi:~ $ arecord -1 arecord: invalid option -- '1' Try
arecord --help’ for more information.
pi@raspberrypi:~ $ arecord --device plughw:1,0 -d 5 test.wav
ALSA lib pcm_hw.c:1713:(_snd_pcm_hw_open) Invalid value for card
arecord: main:788: audio open error: No such file or directory -
-
@sean **** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-hifi-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0 -
@citizendevpi
Your recording device isplughw:0,0
. or default. Remember it.Then try this.
arecord -d 10 test.wav
Say something. It will be record your voice to test.wav on 10 secs.
Works?If so, then,
aplay test.wav
It should play previous recording from
arecord
. Can you hear anything? -
@sean yes barley
but yes -
@citizendevpi
Your Mic and Speaker are both the default. So, Now, show your config to me. -
This post is deleted! -
UPDATE
[2.1.0] - 2018.11.14
- Customizable
command
feature is added. Now you can control your device and MM without other module’s help.
And notification system oftranscriptionHook
is changed. New configuration is needed. - Prepared hook commands. Say these (Or customize them in configuration)
hide all
: modules on screen will be hiddenshow all
: hidden modules will be shown againreboot yourself
: reboot deviceshutdown yourself
: shutdown devicego to sleep
: LCD power off (you might need to modify/scripts/screenoff.sh
)wake up
: LCD power on (you might need to modify/scripts/screenon.sh
)
onIdle
feature be added. Aftertimer
without no query after last query,command
will be activated. (By default, after 30min All modules will be hidden.)- And
onActivate
feature is added. When you activate Assistant, thiscommand
will be executed aftertimer
. (By default, modules hidden byonIdle
will be shown again) - For update from 2.0.0
cd ~/MagicMirror/modules/MMM-AssistantMk2 git pull
- Customizable