MMM-AssistantMk2

A Former User

@citizendevpi
Anyway,
You should confirm to check your audio device card and name, and your RPI should be able to run below commands (or similar)

arecord -d 5 test.wav

or

arecord --device plughw:1,0 -d 5  test.wav

(plughw:1,0 might be different. You should find your proper device card and number with arecord -l)

citizendevpi

@sean said in MMM-AssistantMk2 & MMM-GAction:

arecord --device plughw:1,0 -d 5 test.wav

A Former User

@citizendevpi said in MMM-AssistantMk2 & MMM-GAction:

arecord --device plughw:1,0 -d 5 test.wav

That works? If so, you can set your config record.device: "plughw:1,0",

citizendevpi

@citizendevpi pi@raspberrypi:~ $ arecord -d 5 test.wav
Recording WAVE ‘test.wav’ : Unsigned 8 bit, Rate 8000 Hz, Mono
pi@raspberrypi:~ $ arecord -l)
bash: syntax error near unexpected token )' pi@raspberrypi:~ $ arecord -1 arecord: invalid option -- '1' Try arecord --help’ for more information.
pi@raspberrypi:~ $ arecord --device plughw:1,0 -d 5 test.wav
ALSA lib pcm_hw.c:1713:(_snd_pcm_hw_open) Invalid value for card
arecord: main:788: audio open error: No such file or directory

A Former User

@citizendevpi
Ok. forget my previous answer.

arecord -l

It’s l (small L), not 1 (one)

citizendevpi

@sean **** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-hifi-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0

A Former User

@citizendevpi
Your recording device is plughw:0,0. or default. Remember it.

Then try this.

arecord -d 10 test.wav

Say something. It will be record your voice to test.wav on 10 secs.
Works?

If so, then,

aplay test.wav

It should play previous recording from arecord. Can you hear anything?

citizendevpi

@sean yes barley
but yes

A Former User

@citizendevpi
Your Mic and Speaker are both the default. So, Now, show your config to me.

citizendevpi

This post is deleted!

A Former User

UPDATE

[2.1.0] - 2018.11.14

Customizable command feature is added. Now you can control your device and MM without other module’s help.
And notification system of transcriptionHook is changed. New configuration is needed.
Prepared hook commands. Say these (Or customize them in configuration)
- hide all : modules on screen will be hidden
- show all : hidden modules will be shown again
- reboot yourself : reboot device
- shutdown yourself : shutdown device
- go to sleep : LCD power off (you might need to modify /scripts/screenoff.sh)
- wake up : LCD power on (you might need to modify /scripts/screenon.sh)
onIdle feature be added. After timer without no query after last query, command will be activated. (By default, after 30min All modules will be hidden.)
And onActivate feature is added. When you activate Assistant, this command will be executed after timer. (By default, modules hidden by onIdle will be shown again)
For update from 2.0.0

cd ~/MagicMirror/modules/MMM-AssistantMk2
git pull

Cr4z33

@sean thanks for the update, but what are those fireworks?

Nothing to do with your module or? :grinning_face:

A Former User

@cr4z33 I wanted someone to ask about Fireworks. :D. I’m making that module for my X-mas eyecandy.
But unfortunately, on RPI the speed is crazy slow. I’m doing optimization, but hard. :D. If I get a success, I’ll release.

Cr4z33

@sean lol alright although I personally wouldn’t use it. :grinning_face_with_smiling_eyes:

teitlebot

@Sean
Thanks for the update. I have two small issues after update.
For some weird reason most of my modules go blank after some time and only turn back on after I trigger assistant with voice.
Also the feedback window only shows up at the bottom if the speaker icon is top right of screen but if I try moving icon the feedback window ends up being in very small areas of screen.
I can post video if I’m not explaining well.

A Former User

@teitlebot

onIdle feature be added. After “timer” is passed without no query from last query, command will be activated. (By default, after 30min All modules will be hidden.)
=> set configuration like this.

onIdle: {
timer: 0, // if you don’t want to use this feature, just set timer as 0 or command as “”
command: “”
},

A Former User

@teitlebot
Second might be css adjustments needed. I don’t know your whole module and css structure, so currently can’t answer. Tomorrow I’ll test and reply to you.

Tschili

This post is deleted!

A Former User

UPDATED

[2.1.1] - 2018.11.23

TTS feature is added. Now, Other modules can order MMM-AssistantMk2 to say something. It can be used like something similar TEXT-TO-SPEECH. By example, you can build your customClock module to say current time via MMM-AssistantMk2
- USAGE:
  - this.sendNotification("ASSISTANT_SAY", "Time to go to bed")
  - this.sendNotification("ASSISTANT_SAY", {text:"C'est trop chaud", lang:"fr-FR"})
- NOTICE:
  - This feature is somekind of Assistant hooking. If you say “Repeat after me SOMETHING”, Google Assistant will repeat SOMETHING. So, there could be a possibility of not responding as intend. Too long or complex text might be not available.
  - Currently I can’t find correspondence of Repeat after me for German/Japanese/Korean language. PR please.
- Thanks to Valerio Pilo. His brilliant idea and PR could make this feature.
For TelegramBot, TTS feature is also added. Now you can make your Home Mirror to say something with MMM-TelegramBot even when you are working in your office.
- /s Please open the door, mom!
Youtube playing status in frontend dev-panel is added.
- At least you can get status of Youtube player event when video fails to be played.
For update from 2.1.0

cd ~/MagicMirror/modules/MMM-AssistantMk2
git pull

teitlebot

@Sean Thank for the update
I have another strange problem starting with the previous update already. If I have assistant module running my node serveronly debug doesnt show anything past “open your browser…”
Basically everything is working but no information gets displayed in the debug window. This problem is only there if I load this module, so something here is doing it.