MMM-GroveGestures

A Former User

cd ~ / MagicMirror / modules / MMM-GroveGestures / py
cp grove_gesture_sensor.py.RPI grove_gesture_sensor.py

It is described on instruction for installation. And that command is not for activation. I provide 2 scripts for each of Raspberry Pi and Asus TinkerBoard. you need to select one for your device. You don’t need to do that job again after once you did.

The real activation would be performed in the module itself on every running of MM.

bolish

@Benjaminh86
You have to search a bit on the forum.
One idea could be to create 2 calendars instances.
See below post extract :

well… I believe it’s far from being perfect…but at least it seems to do the job…

I created a “new” module which does exactly same / has the same code as the one I want to use, but has a different name (folder named “MMM-Calendar2” -> file named “MMM-Calendar2.js” -> within the line Module.register(‘MMM_Calendar2’)).
Not in the default module folder but into the 3rd party module folder…

And put instance 1 on page 1 and isntance 2 on page 2.

Benjaminh86

Hello @Sean,
I will look at this in more detail in the module.
Thank you again for your work.

Benjaminh86

@bolish
I will explore this track.
Thanks to you ; you already helped me a lot!

Benjaminh86

@Sean
it’s weird; the sensor is not active if I do not order:

cd ~ / MagicMirror / modules / MMM-GroveGestures / py
cp grove_gesture_sensor.py.RPI grove_gesture_sensor.py

would not it come from “chmod + x * .sh” where I hurt something? …

Benjaminh86

@bolish
it works!
thanks for your help

A Former User

@Benjaminh86
Can’t understand.
Do you need to do that shell command per every execution of MM? Have you reinstalled it?
That commands just need to be done once when you install this module.

And that command isn’t related with chmod + x .sh at all.

Check this.

ls ~/MagicMirror/modules/MMM-GroveGestures/py

There should be grove_gesture_sensor.py besides grove_gesture_sensor.py.RPI and grove_gesture_sensor.py.ATB.
Are those files there?

Benjaminh86

@Sean
I have to make this command every start of the pi, knowing that I do not start the MM automatically (pmm2) time to set everything (npm start).
I’ll be watching tonight with
ls ~ / MagicMirror / modules / MMM-GroveGestures / py

Benjaminh86

@Sean
That’s what happens :
pi@raspberrypi:~ $ ls ~/MagicMirror/modules/MMM-GroveGestures/py
gesture_print.py grove_gesture_sensor.pyc
grove_gesture_sensor.py grove_gesture_sensor.py.RPI
grove_gesture_sensor.py.ATB

A Former User

@Benjaminh86
If you have those files, you don’t need to execute any manual commands o n MM running