Read the statement by Michael Teeuw here.
Start Raspberry Pi with TV
-
You sort of need to do this in reverse.
https://hackaday.com/2017/04/23/the-raspberry-pi-as-an-ir-to-wifi-bridge/
But yeah I would do some googling on the pi being a ir reciever / sender
https://www.hackster.io/austin-stanton/creating-a-raspberry-pi-universal-remote-with-lirc-2fd581
http://alexba.in/blog/2013/01/06/setting-up-lirc-on-the-raspberrypi/
-
There’s no way to make the Raspberry Pi send a button prompt or some kind of electric signal via the GPIO?
-
@hallonpaj sure, can do… but someone will probably has to write code (module) to make that happen…
-
@hallonpaj Yeah of course it could you can get a 3.3v relay and its a 2 wire job to GPIO
But what are you going to wire it to?
What you do is put an IR Led on a wire and your Pi is now a universal remote for any device in range via LIRC.
Its a LED + resistor and two wires.Yeah a pi could with the right interface also do powerline comms but your TV can not so that would be a bit pointless
https://www.aliexpress.com/item/3-3V-5V-12V-24V-1-Channel-Relay-Module-Low-Level-Trigger-Optocoupler-Isolation-Relay-Module/32849672414.html?src=google&albslr=221170259&src=google&albch=shopping&acnt=494-037-6276&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&&albagn=888888&albcp=1706973087&albag=65008162765&trgt=296904914040&crea=en32849672414&netw=u&device=c&gclid=Cj0KCQiAzePjBRCRARIsAGkrSm7WKqheLphSYy6d32kQd-7D9xInwCfxCdYzlxHx6C493on_yqY7e-gaAvVHEALw_wcB&gclsrc=aw.ds -
Took your advice and now it’s working perfectly. Big thanks for the help!
-
I should of mentioned these things, doh!
But basically a Pi with an IR LED