Hi all,
I’m Erik living in Holland and complete new to programming and the MagicMirror.
I hope u all can help me alot… i will need that :P
A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
D
Best posts made by Desertswing
-
RE: Introduce yourself!posted in General Discussion
Latest posts made by Desertswing
-
RE: disable NO signal messageposted in Hardware
@aboulezz said in disable NO signal message:
I faced the same problem with my LG screen but found a work around.
Step 1) I used wiringpi.com and modified the simple blink example to send out just one impulse:
#include
int main (void)
{
wiringPiSetup () ;
pinMode (0, OUTPUT) ;
digitalWrite (0, HIGH) ; delay (200) ;
digitalWrite (0, LOW) ;
return 0 ;
}Step 2) I modified the PIR modules’ node_helper.js so within the functions activate / deactivate don’t enable/disable the HDMI output but execute my compiled ‘blink’ command.
Step 3) I hard - wired the singal pin to the (with resistor / transistor) to the screens power-button.
done :-)
Can`t i use this instead and make my raspberry a longer time to get the HDMI port visible to the TV, ore do i get the message still when giving the HDMI port a command to show himself. (If u know what i mean).
-
RE: disable NO signal messageposted in Hardware
@bhepler , But when i want to keep my raspberry always online i have to do something about this situation, it is possible to put new firmware on the TV but i can`t find any modding software thats easier then Hexa codes to configure…
with an LG tv its possible because u can get the firmware software download on a USB drive from the TV, but i want to use a tv that i don`t use anymore.(Recycle project).
-
RE: disable NO signal messageposted in Hardware
Is there new info about this situation…?
Really want to use my 47’ Philips tv (older version)Hope someone replies!
-
RE: Pulse-Eightposted in Troubleshooting
But the: Display on: echo “on 0” | cec-client -s -d 1 command works fine.
only the off command isen`t working? -
RE: Pulse-Eightposted in Troubleshooting
@yawns said in Pulse-Eight:
What command are you sending?
Display on:
echo "on 0" | cec-client -s -d 1
Display off:echo "standby 0" | cec-client -s -d 1
Show status:echo "pow 0" | cec-client -s -d 1Do u got an solution?
-
RE: Pulse-Eightposted in Troubleshooting
Second command u refer
I used it with my pir sensor and seprate -
RE: Pulse-Eightposted in Troubleshooting
I got it working but only for turning the tv on with my pir sensor,
But, standby command isen`t working…Any tips??
-
RE: Different sleep functionposted in Requests
@yawns
I tried that one but can`t find the right install file to put it on…!
I used the V59 version -
Pulse-Eightposted in Troubleshooting
Hey all could someone help me with my Mirror,
I installed the Pulse-Eight software on the pi but do i need to config these files ore is it working instand…?I want to have my tv on standby when my pir sensor shuts off the hdmi port and back on when it detects movements.
i tried: Pulse-Eight/libcec
from github but my tv does not do the trick…(Its a Smart-tv so i think it has the requirements.Here is my complete install:
pi@MIRRORpie:~ $ git clone https://github.com/Pulse-Eight/platform.git Cloning into 'platform'... remote: Counting objects: 509, done. remote: Total 509 (delta 0), reused 0 (delta 0), pack-reused 509 Receiving objects: 100% (509/509), 174.76 KiB | 0 bytes/s, done. Resolving deltas: 100% (292/292), done. Checking connectivity... done. pi@MIRRORpie:~ $ mkdir platform/build pi@MIRRORpie:~ $ cd platform/build pi@MIRRORpie:~/platform/build $ cmake .. -- The C compiler identification is GNU 4.9.2 -- The CXX compiler identification is GNU 4.9.2 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Looking for pthread.h -- Looking for pthread.h - found -- Looking for pthread_create -- Looking for pthread_create - not found -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE -- Looking for __atomic_fetch_add_4 in atomic -- Looking for __atomic_fetch_add_4 in atomic - found -- Performing Test HAS_BUILTIN_SYNC_ADD_AND_FETCH -- Performing Test HAS_BUILTIN_SYNC_ADD_AND_FETCH - Success -- Performing Test HAS_BUILTIN_SYNC_SUB_AND_FETCH -- Performing Test HAS_BUILTIN_SYNC_SUB_AND_FETCH - Success -- Performing Test HAS_BUILTIN_SYNC_VAL_COMPARE_AND_SWAP -- Performing Test HAS_BUILTIN_SYNC_VAL_COMPARE_AND_SWAP - Success -- Configuring done -- Generating done -- Build files have been written to: /home/pi/platform/build pi@MIRRORpie:~/platform/build $ make Scanning dependencies of target p8-platform [ 50%] Building CXX object CMakeFiles/p8-platform.dir/src/util/StringUtils.cpp.o [100%] Linking CXX static library libp8-platform.a [100%] Built target p8-platform pi@MIRRORpie:~/platform/build $ sudo make install [100%] Built target p8-platform Install the project... -- Install configuration: "" -- Installing: /usr/local/lib/libp8-platform.a -- Installing: /usr/local/include/p8-platform/os.h -- Installing: /usr/local/include/p8-platform/posix/os-socket.h -- Installing: /usr/local/include/p8-platform/posix/os-threads.h -- Installing: /usr/local/include/p8-platform/posix/os-types.h -- Installing: /usr/local/include/p8-platform/sockets/cdevsocket.h -- Installing: /usr/local/include/p8-platform/sockets/socket.h -- Installing: /usr/local/include/p8-platform/sockets/tcp.h -- Installing: /usr/local/include/p8-platform/threads/atomics.h -- Installing: /usr/local/include/p8-platform/threads/mutex.h -- Installing: /usr/local/include/p8-platform/threads/threads.h -- Installing: /usr/local/include/p8-platform/util/atomic.h -- Installing: /usr/local/include/p8-platform/util/buffer.h -- Installing: /usr/local/include/p8-platform/util/StringUtils.h -- Installing: /usr/local/include/p8-platform/util/StdString.h -- Installing: /usr/local/include/p8-platform/util/timeutils.h -- Installing: /usr/local/include/p8-platform/util/util.h -- Installing: /usr/local/lib/pkgconfig/p8-platform.pc -- Installing: /usr/local/lib/p8-platform/p8-platform-config.cmake pi@MIRRORpie:~/platform/build $ cd pi@MIRRORpie:~ $ git clone https://github.com/Pulse-Eight/libcec.git Cloning into 'libcec'... remote: Counting objects: 14733, done. remote: Total 14733 (delta 0), reused 0 (delta 0), pack-reused 14733 Receiving objects: 100% (14733/14733), 5.11 MiB | 1.66 MiB/s, done. Resolving deltas: 100% (11196/11196), done. Checking connectivity... done. pi@MIRRORpie:~ $ mkdir libcec/build pi@MIRRORpie:~ $ cd libcec/build pi@MIRRORpie:~/libcec/build $ cmake -DRPI_INCLUDE_DIR=/opt/vc/include -DRPI_LIB_ DIR=/opt/vc/lib .. -- The C compiler identification is GNU 4.9.2 -- The CXX compiler identification is GNU 4.9.2 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Performing Test SUPPORTS_CXX11 -- Performing Test SUPPORTS_CXX11 - Success -- Looking for pthread.h -- Looking for pthread.h - found -- Looking for pthread_create -- Looking for pthread_create - not found -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE -- Looking for initscr in curses -- Looking for initscr in curses - not found -- Looking for dlopen in dl -- Looking for dlopen in dl - found -- Looking for clock_gettime in rt -- Looking for clock_gettime in rt - found -- Found PythonLibs: /usr/lib/arm-linux-gnueabihf/libpython3.4m.so (found versio n "3.4.2") -- git found: libcec-4.0.2+9-3953f8d -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") -- Looking for include file sys/file.h -- Looking for include file sys/file.h - found -- Looking for flock -- Looking for flock - found -- Checking for module 'udev' -- Found udev, version 215 -- Looking for 3 include files X11/Xlib.h, ..., X11/extensions/Xrandr.h -- Looking for 3 include files X11/Xlib.h, ..., X11/extensions/Xrandr.h - found -- Looking for XRRGetScreenResources in Xrandr -- Looking for XRRGetScreenResources in Xrandr - found -- Looking for bcm_host_init in bcm_host -- Looking for bcm_host_init in bcm_host - found -- Looking for include files tda998x_ioctl.h, comps/tmdlHdmiCEC/inc/tmdlHdmiCEC_ Types.h -- Looking for include files tda998x_ioctl.h, comps/tmdlHdmiCEC/inc/tmdlHdmiCEC_ Types.h - not found -- Found SWIG: /usr/bin/swig2.0 (found version "2.0.12") -- Configured features: -- Pulse-Eight CEC Adapter: yes -- Pulse-Eight CEC Adapter detection: yes -- xrandr support: yes -- Raspberry Pi support: yes -- TDA995x support: no -- Exynos support: no -- DRM support: yes -- AOCEC support: no -- Python support: version 3.4.2 (3.4) -- lib info: git revision: libcec-4.0.2+9-3953f8d, compiled on Wed 21 Jun 17:13: 00 UTC 2017 by pi@MIRRORpie on Linux 4.9.28-v7+ (armv7l), features: P8_USB, DRM, P8_detect, randr, RPi -- Configuring done -- Generating done -- Build files have been written to: /home/pi/libcec/build pi@MIRRORpie:~/libcec/build $ make -j4 Scanning dependencies of target cec [ 2%] Building CXX object src/libcec/CMakeFiles/cec.dir/CECClient.cpp.o [ 4%] Building CXX object src/libcec/CMakeFiles/cec.dir/CECProcessor.cpp.o [ 7%] Building CXX object src/libcec/CMakeFiles/cec.dir/LibCEC.cpp.o [ 9%] Building CXX object src/libcec/CMakeFiles/cec.dir/LibCECC.cpp.o [ 11%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapt erDetection.cpp.o [ 14%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapt erCommunication.cpp.o [ 16%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapt erMessageQueue.cpp.o [ 19%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/AdapterFactory. cpp.o [ 21%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/Pulse-Eight/USB CECAdapterMessage.cpp.o [ 23%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/Pulse-Eight/USB CECAdapterCommands.cpp.o [ 26%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/Pulse-Eight/USB CECAdapterMessageQueue.cpp.o [ 28%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/Pulse-Eight/USB CECAdapterCommunication.cpp.o [ 30%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/Pulse-Eight/USB CECAdapterDetection.cpp.o [ 33%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECAudioSystem. cpp.o [ 35%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECBusDevice.cp p.o [ 38%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECDeviceMap.cp p.o [ 40%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECPlaybackDevi ce.cpp.o [ 42%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECRecordingDev ice.cpp.o [ 45%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECTuner.cpp.o [ 47%] Building CXX object src/libcec/CMakeFiles/cec.dir/devices/CECTV.cpp.o [ 50%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/ANComma ndHandler.cpp.o [ 52%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/CECComm andHandler.cpp.o [ 54%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/SLComma ndHandler.cpp.o [ 57%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/VLComma ndHandler.cpp.o [ 59%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/RLComma ndHandler.cpp.o [ 61%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/PHComma ndHandler.cpp.o [ 64%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/RHComma ndHandler.cpp.o [ 66%] Building CXX object src/libcec/CMakeFiles/cec.dir/implementations/AQComma ndHandler.cpp.o [ 69%] Building CXX object src/libcec/CMakeFiles/cec.dir/platform/adl/adl-edid.c pp.o [ 71%] Building CXX object src/libcec/CMakeFiles/cec.dir/platform/nvidia/nv-edid .cpp.o [ 73%] Building CXX object src/libcec/CMakeFiles/cec.dir/platform/drm/drm-edid.c pp.o [ 76%] Building CXX object src/libcec/CMakeFiles/cec.dir/platform/posix/os-edid. cpp.o [ 78%] Building CXX object src/libcec/CMakeFiles/cec.dir/platform/posix/serialpo rt.cpp.o [ 80%] Building CXX object src/libcec/CMakeFiles/cec.dir/platform/X11/randr-edid .cpp.o [ 83%] Linking CXX shared library libcec.so [ 83%] Built target cec Scanning dependencies of target cecc-client Scanning dependencies of target cec-client [ 85%] Swig source [ 88%] Building C object src/cecc-client/CMakeFiles/cecc-client.dir/cecc-client. c.o [ 90%] Building CXX object src/cec-client/CMakeFiles/cec-client.dir/cec-client.c pp.o [ 92%] Linking C executable cecc-client [ 92%] Built target cecc-client [ 95%] Linking CXX executable cec-client [ 95%] Built target cec-client Scanning dependencies of target _cec [ 97%] Building CXX object src/libcec/CMakeFiles/_cec.dir/libcecPYTHON_wrap.cxx. o [100%] Linking CXX shared module _cec.so [100%] Built target _cec pi@MIRRORpie:~/libcec/build $ sudo make install [ 83%] Built target cec [ 88%] Built target cec-client [ 92%] Built target cecc-client [100%] Built target _cec Install the project... -- Install configuration: "" -- Installing: /usr/local/bin/./cec-client-4.0.2 -- Installing: /usr/local/bin/./cec-client -- Installing: /usr/local/bin/./cecc-client-4.0.2 -- Installing: /usr/local/bin/./cecc-client -- Installing: /usr/local/bin/./pyCecClient -- Installing: /usr/local/lib/python3.4/dist-packages/cec/_cec.so -- Set runtime path of "/usr/local/lib/python3.4/dist-packages/cec/_cec.so" to " " -- Installing: /usr/local/lib/python3.4/dist-packages/cec/__init__.py -- Installing: /usr/local/lib/pkgconfig/libcec.pc -- Installing: /usr/local/include/libcec/cec.h -- Installing: /usr/local/include/libcec/cecc.h -- Installing: /usr/local/include/libcec/cecloader.h -- Installing: /usr/local/include/libcec/cectypes.h -- Installing: /usr/local/include/libcec/version.h -- Installing: /usr/local/lib/libcec.so.4.0.2 -- Installing: /usr/local/lib/libcec.so.4 -- Installing: /usr/local/lib/libcec.so -- Set runtime path of "/usr/local/lib/libcec.so.4.0.2" to "" pi@MIRRORpie:~/libcec/build $ sudo ldconfigCould someone help me, (If u are dutch its easier for me to understand)