Hi there guys, I’m 0livia from Hungary and sometimes London. :) I work in the Automotive industry. My hobby is basically computers, but also like playing on instruments like sax, guitar and piano.
I like this project and, I have already started to build my smart mirror, It is hanging on the wall now without the mirror :) still waiting for the glass… You are guys awesome!

@sdetweil I started my mirror with the config a linked earlier.
This is my error in the terminal

[09.12.2022 15:57.24.612] [LOG] Initializing new module helper …
[09.12.2022 15:57.24.612] [LOG] Module helper loaded: MMM-Futar
[09.12.2022 15:57.24.625] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: TypeError: Cannot read properties of undefined (reading ‘split’)

@sdetweil Hi I have contacted the DevGuy and he said no need to clone the modules multiple times, I tried and do not work that way.

The solution what he told is not working for me either.
Here is what he said - you need to add the modules into the config.js file like this way.

{
module: “MMM-Futar”,
position: “top_left”,
header: ‘Közvágóhíd -> Ráckeve’,
config: {
stopId: ‘BKK_009628’, // Közvágóhíd
routeId: 'BKK_H6,
}
},
{
module: “MMM-Futar”,
position: “top_left”,
header: ‘Ráckeve -> Közvágóhíd’,
config: {
stopId: ‘BKK_007947’, // Ráckeve
routeId: ‘BKK_H6’,
}
},
]
};

I tried this way and it gives me a blank screen
here is my config

https://pastebin.com/bwrTtisP

Anyone has any idea about this issue of mine?

@sdetweil i do not use pm2, when i have got time i ll give you log this is next year as im going to greece to get ddfdsking orange with the truck. So happy new year guys

@bnitkin cool module thank you. when i was building my mirror i wanted to ad another bus company schedule which uses GTFS.

@sdetweil no there is no custom.css file - removed
config.js file has been overwritten with the working one.

so basicly the config and all files are remain the same as it was working earlier.

That is why i do not understand what is going on because all the working files were loaded, so the compliment should appear on screen.

That is why I asked is it a kind of bug.?

@sdetweil thank you for the script! I do not know if it was available on that time when the update came out, so i did the upgrade as it was in TFM. And boom it crashed, i tried to figure out what was the problem even reading log files. I was ok fak it. As my parents kept asking me about the mirrror so decided to rebuild again. And the thing is this project runs a few xears now and it has not changed the “user interface” to make it easier to setup the modules. You know what, the project should develope in a better way to make this project available to ppl who do not have those programing skills. I mean it would be great for example if all the settings would be available in the modules and the user can choose what he/she activate with a toggle button or what so ever, and not playing around with config files and npm install npm start and all tha crazy stuff. As i said it is ok for programers whom actually write the modules or the core system. But if you want bormal users to participate in the project than i think it should be a good way to reduce the complicty to configure a module or install a module.
Anyway do we know why the compliment module gone? :)

@sdetweil yes it is nothing wrong with building and maintaining as long as it is straight forward (like linux) but as i said it is not straight forward.
Anyway do you know what could be the problem now, as my mirror has the original working config js which worked until i started to make changes to the complement module? It is not even showing up on the screen. no error message nothing, so the config file should be ok, but why there is not showing up the module?

Maybe this is a bug?

@sdetweil yes i set one thing which would be enough i do not needed anything just reduce the size that is it.

yes maybe it is a standard webpage i do not argue all i say is that it is complacated, brackets, dots, etc etc a lot of silly things which makes the mirror crash if too much dots etc etc

that is why i said that it is good for programers, and people with plenty of time.
As a noon programer, the details are not very informative to a R1 user even if it is covered. For example no proper example just look at the image what you upload. I would not have clue if you did not write an example how to use. I respect for those ppl, but why so hard to write the documetation with examples for stupid users like me.
I built the mirror in 2017 it was working ok and not needed any help to make it work,than an upgrade came which crashed the mirror. (like windows :D ) My parents asked me to repair the mirror, but have no time to debug things. So the end of the year i reinstalled the whole thing, and it is just a chaos for me, ’ cos whatever module I tried to install all goes wrong started with the futar, now it is the compliments thing, and see there is still no solution what the hack is going on. But it s a standard webpage :)
See the config file above - it was all working, I copied back the config and still no joy. So you canot say that this a standrd webpage, it is more than that as it uses electron ,node and so on. This thing needs to make it easier to configure, or set things. What is obvious for a programer is not obvious for stupid user who would like to use it and even donate the project. Because it is complicated and spending time on it and gives no joy, it makes me angry and just give up :)

@0livia So yeah gave up, i m not a programer, just only love computers. This mirror thingy is good project but it is for only people who are programers, or have plenty of time to mucking about the settings and working out things. Unfortunately I have not got that much time. So yeah compliments is a good feature but without it, the mirror works for my parents with the important info displayed on it. The mirror is hanging on the wall now and leave it like as it is.

@0livia this config.js file was working as you can see the screenshot above.

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "hu",
	locale: "hu-HU",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "Szigetszentmiklós",
				locationID: "3044475", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "87546dddc88d456621701a4e2a8340bbc"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Szigetszentmiklós",
				locationID: "2024058", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "65863ddc88d785401a4e2a8340bbc"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "HVG TECH TUDOMÁNY HÍREK",
						url: "http://hvg.hu/rss/tudomany"
					},
                    			{
						title: "BBC VILÁG HÍREK",
						url: "http://feeds.bbci.co.uk/news/world/rss.xml"
					},
                    			{
						title: "TELEX HÍREK",
						url: "https://telex.hu/rss"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
        {
       module: "MMM-network-signal",
       position: "top_right",
       config: {
           // Configuration of the module goes here
       }
   },  
       {
        module: 'MMM-Futar',
        position: 'top_center',
        header: 'Szigetszentmiklós -> Csepel Szent Imre tér',
        config: {
        stopId: 'BKK_044033',
        routeId: 'BKK_2380',
        }
    },
        {
        module: 'MMM-Futar',
        position: 'top_center',
        header: 'Szigetszentmiklós -> Csepel Szent Imre tér',
        config: {
        stopId: 'BKK_044034',
        routeId: 'BKK_0380',
        }
    },
        {
        module: 'MMM-Futar',
        position: 'top_center',
        header: 'Ráckeve -> Közvágóhíd',
        config: {
        stopId: 'BKK_F04614',  // Ráckeve
        routeId: 'BKK_H6',
        }
        },
        {
        module: 'MMM-Futar',
        position: "top_center",
        header: 'Közvágóhíd -> Ráckeve',
        config: {
        stopId: 'BKK_F04613',  // Közvágóhíd
        routeId: 'BKK_H6',
        }
        },
    ]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

@0livia what ever i change in the config js is not working. I give up.
From backup I copied back the original config js and now it is not working even with the correct config js file. Why so complicated? :(

@sdetweil Thank you!
It’s just do not work :(
I have modified the config js and the module gone with the below config

{
			module: "compliments",
			position: "lower_third",
            config: {
				classes: "thin"
   		},

I even tried with the custom css and still do not work. and the module is missing