Hi folks,
Here is my bedroom MagicMirror. My wife wanted me to use google calendar and there is a much better chance of me observing it if it is right in front of my face - so this project commenced. I picked up a mirror off facebook marketplace for $10 that was a fairly close match to our bedroom furniture. From there, I had the glass replaced with 2-way glass. That was probably the most expensive piece of the project but still reasonable. I built a wood frame for behind the mirror and set the monitor and pi in it. Some stain and picture hanging wire and the project was complete.

Modules used:
MMM-AirNow
MMM-OpenWeatherForecast
MMM-PIR-Sensor-Lite - This is for a sensor which will wake the mirror up when someone is nearby
MMM-Pollen

@sdetweil I actually like this module a little better. It has a few bits of extra info displayed, or at least by default. Thanks again!

@UncleRoger said in My Bedroom MagicMirror:

MMM-CalendarExt3

Thank you! I definitely wanted it to look like it matched everything with the rest of our bedroom set (I think our set is from the 1940’s?). Finding a $10 mirror on marketplace was great! I didn’t feel too bad about scrapping the glass it had for the two-way glass I was putting in. I decided to splurge and get it professionally fitted and installed in the mirror by a glass place. I know plexiglass is a cheaper option but as this was going in our bedroom… it had to be done nicely. I think the glass was below $200 for it cut & installed. Worth every penny. I have taken a look at the full calendar display. I’ll have to try this module out to see how it looks - my concern is that it will get a little small and hard to read but I won’t know unless I try! Thank you for the suggestion.

@sdetweil I actually like this module a little better. It has a few bits of extra info displayed, or at least by default. Thanks again!

Hi folks,
Here is my bedroom MagicMirror. My wife wanted me to use google calendar and there is a much better chance of me observing it if it is right in front of my face - so this project commenced. I picked up a mirror off facebook marketplace for $10 that was a fairly close match to our bedroom furniture. From there, I had the glass replaced with 2-way glass. That was probably the most expensive piece of the project but still reasonable. I built a wood frame for behind the mirror and set the monitor and pi in it. Some stain and picture hanging wire and the project was complete.

Modules used:
MMM-AirNow
MMM-OpenWeatherForecast
MMM-PIR-Sensor-Lite - This is for a sensor which will wake the mirror up when someone is nearby
MMM-Pollen

@sdetweil That worked! I loaded the Tom Hirschberger module and that worked. Thanks!

@sdetweil ```
git remote -v
origin https://github.com/MarcLandis/MMM-OpenWeatherMapForecast.git (fetch)
origin https://github.com/MarcLandis/MMM-OpenWeatherMapForecast.git (push)

I have been running MMM-OpenWeatherMapForecast for many months without issue. All off a sudden it won’t load. It just shows ‘Loading’ on the screen. When I looked at the pm2 logs all I see is:
[2024-07-02 20:07:55.501] [LOG] [MMM-OpenWeatherMapForecast] 2-Jul-24 20:07 ** ERROR ** null

Not sure where to start with this one…