Thank you. I will look at ddcutil mode next and update.
A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
S
Latest posts made by siujd2001
-
RE: MMM-PIR Busy Issueposted in Troubleshooting
-
RE: MMM-PIR Busy Issueposted in Troubleshooting
Switching to mode:0 does now appear to work, in that there is no gpio error and ctrl-q and restarts don’t throw an error. So that’s great! Thank you.
Screen blanks but does not turn all the way off, so that’s still an issue.
-
RE: MMM-PIR Busy Issueposted in Troubleshooting
on boot, gpioinfo shows “GPIO21” unused input active-high. first start of npm run start:wayland works as intended.
After CTRL-Q, gpioinfo shows “GPIO21” “lg” input active-high [used pull-down]. Successive npm run start:wayland shows GPIO Busy error.
-
MMM-PIR Busy Issueposted in Troubleshooting
Upon fresh startup, rpm run start:wayland works as intended
- MagicMirror starts and all modules appear to work as intended
- MMM-Pir reads sensor and refreshes countdown timer as desired
After control-Q to stop the MagicMirror, each successive operation of npm run start:wayland returns error “PIR Error Detected: Error: ‘GPIO busy”
- Log shows [ERROR] [MMM-Pir] [LIB] [PIR] Error: ‘GPIO Busy’
- MagicMirror works, including all other modules except MMM-Pir
Sensor AMR312 connected to 3v power (Pin 1), Ground (Pin 6), and GPIO21 (Pin 40)
Current config.js settings
module: ‘MMM-Pir’,
position: ‘top_left’,
config: {
debug: false,
Display: {
timeout: 60 * 1000,
animate: true,
style: 1,
colorFrom: “#FF0000”,
colorTo: “#00FF00”,
// mode: 1,
// mode: 7,
mode: 8,
counter: true,
lastPresence: true,
lastPresenceTimeFormat: “LL H:mm”,
availability: false,
// availability: true,
autoDimmer: false,
xrandrForceRotation: “normal”,
wrandrForceRotation: “normal”,
wrandrForceMode: null,
waylandDisplayName: “wayland-0”,
// waylandDisplayName: “HDMI-A-1”,
relayGPIOPin: 0, //<-- default was 0
ddcutil: {
powerOnCode: “01”,
powerOffCode: “04”,
skipSetVcpCheck: false
}
},
Pir: {
mode: 1,
gpio: 21
// gpio: 4 // <–connected to 4
} -
RE: Help with upgrading to 2.30.0posted in Troubleshooting
@sdetweil After everything was borked, I did try to run 2.29.0 and everything went back to “normal” except MMM-Pir, which remained as “undefined”.
Currently nothing works at all.
-
Help with upgrading to 2.30.0posted in Troubleshooting
My MM worked fine under 2.29.0. I had to run some updates recently to MMM-CalendarExt3 and MMM-Pir, and noticed that there was a new version - 2.30.0. I tried to run the sdetweil upgrade script, but things totally went sideways. At first, MMM-CalendarExt3 wouldn’t pull events from Google Calendar, and MMM-Pir would show up as undefined. Then things got worse - now MM won’t even run at all.
Please help.
Below is the output from my current state of trying to run the sdetweil scripts:
Running test script:
@raspberrypi:~/MagicMirror $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)”
update log will be in /home//MagicMirror/installers/upgrade.logdoing test run = true, NO updates will be applied!
Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: V1.0.0
Node should be upgraded.
Node.js upgrade defered, doing test run
Check current NPM installation …
NPM currently installed. Checking version number.
Minimum npm version: V10.8.2
Installed npm version: V10.8.2
No npm upgrade necessary.saving custom.css
reverting to master branch from (HEAD, saving changed files
Previous HEAD position was 94c3c699 Release 2.29.0 (#3568)
Switched to branch ‘master’
upgrading from version 2.30.0 to 2.30.0
fetching latest revisions
cp: cannot stat ‘installers/mm.sh’: No such file or directoryChecking for modules with removed libraries
bash: line 937: /usr/local/bin/node: No such file or directory
no modules found needing npm refresh
restoring custom.cssRunning update script:
@raspberrypi:~/MagicMirror $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)” apply
update log will be in /home//MagicMirror/installers/upgrade.log
doing test run = false
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: V1.0.0
installing correct version of node and npm, please wait
/usr/local/bin/n: line 746: /usr/local/bin/node: No such file or directory
Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: V1.0.0
Node should be upgraded.
Installing Node.js …
apply: line 318: [: too many arguments
tar (child): /home//node_release-.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
node version is apply: line 353: /usr/local/bin/node: No such file or directory
apply: line 355: /usr/local/bin/node: No such file or directory
Node.js installation Done! version=
apply: line 361: [: too many arguments
Check current NPM installation …
NPM currently installed. Checking version number.
Minimum npm version: V10.8.2
Installed npm version: V10.8.2
No npm upgrade necessary.saving custom.css
local version 2.30.0 already same as master 2.30.0
restoring custom.css
@raspberrypi:~/MagicMirror $—--------------------------
Trying to run MagicMirror@raspberrypi:~/MagicMirror $ npm run start
magicmirror@2.30.0 start
npm run start:x11magicmirror@2.30.0 start:x11
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js[2025-01-03 02:01:30.545] [ERROR] App threw an error during load
[2025-01-03 02:01:30.549] [ERROR] Error: Cannot find module ‘undici’
Require stack:- /home//MagicMirror/js/app.js
- /home//MagicMirror/js/electron.js
at Module._resolveFilename (node:internal/modules/cjs/loader:1232:15)
at s._resolveFilename (node:electron/js2c/browser_init:2:121498)
at Module._resolveFilename (/home//MagicMirror/node_modules/module-alias/index.js:49:29)
at Module._load (node:internal/modules/cjs/loader:1058:27)
at c._load (node:electron/js2c/node_init:2:17025)
at Module.require (node:internal/modules/cjs/loader:1318:19)
at require (node:internal/modules/helpers:179:18)
at Object. (/home//MagicMirror/js/app.js:15:40)
at Module._compile (node:internal/modules/cjs/loader:1484:14)
at Module._extensions…js (node:internal/modules/cjs/loader:1564:10)
at Module.load (node:internal/modules/cjs/loader:1295:32)
at Module._load (node:internal/modules/cjs/loader:1111:12)
at c._load (node:electron/js2c/node_init:2:17025)
at Module.require (node:internal/modules/cjs/loader:1318:19)
at require (node:internal/modules/helpers:179:18)
at Object. (/home//MagicMirror/js/electron.js:4:14)
A JavaScript error occurred in the main process
Uncaught Exception:
Error: Cannot find module ‘undici’
Require stack: - /home//MagicMirror/js/app.js
- /home//MagicMirror/js/electron.js
at Module._resolveFilename (node:internal/modules/cjs/loader:1232:15)
at s._resolveFilename (node:electron/js2c/browser_init:2:121498)
at Module._resolveFilename (/home//MagicMirror/node_modules/module-alias/index.js:49:29)
at Module._load (node:internal/modules/cjs/loader:1058:27)
at c._load (node:electron/js2c/node_init:2:17025)
at Module.require (node:internal/modules/cjs/loader:1318:19)
at require (node:internal/modules/helpers:179:18)
at Object. (/home//MagicMirror/js/app.js:15:40)
at Module._compile (node:internal/modules/cjs/loader:1484:14)
at Module._extensions…js (node:internal/modules/cjs/loader:1564:10)
at Module.load (node:internal/modules/cjs/loader:1295:32)
at Module._load (node:internal/modules/cjs/loader:1111:12)
at c._load (node:electron/js2c/node_init:2:17025)
at Module.require (node:internal/modules/cjs/loader:1318:19)
at require (node:internal/modules/helpers:179:18)
at Object. (/home//MagicMirror/js/electron.js:4:14)
^C/home//MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
—--------------------------------------------------
Trying full installation:@raspberrypi:~/MagicMirror $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”
$$\ $$\ $$\ $$\ $$\ $$\ $$$$$$
$$$\ $$$ | _| $$$\ $$$ |_| $$ $$
$$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ _/ $$ |
$$$$$$ $$ | _$$\ $$ $$\ $$ |$$ |$$$$$$ $$ |$$ |$$ $$\ $$ $$\ $$ $$\ $$ $$\ $$$$$$ |
$$ $$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ $$$ $$ |$$ |$$ | _|$$ | _|$$ / $$ |$$ | _|$$ /
$$ |$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ |
$$ | _/ $$ |$$$$$$$ |$$$$$$$ |$$ |$$$$$$$\ $$ | _/ $$ |$$ |$$ | $$ | $$$$$$ |$$ | $$$$$$$$
_| _| _| _$$ |_| _|_| _|_|_| __| _/ _| _______|
$$\ $$ |
$$$$$$ |
_____/install log being saved to /home//install.log
Updating packages …
[ <=> ]
Installing helper tools …
bash: line 287: /usr/local/bin/node: No such file or directory
node failed to execute, please check the error message and resolve before trying again
@raspberrypi:~/MagicMirror $ -
RE: MMM-CalendarExt3 24hr timeposted in Troubleshooting
Thank you.
I used the following in the Ext3 section and it seemed to work:
locale: “en-GB”,
eventTimeOptions: {timeStyle: ‘short’}, -
RE: MMM-CalendarExt3 24hr timeposted in Troubleshooting
I also have MMM-Config installed if that makes a difference.
/* Config Sample * * For more information on how you can configure this file * see https://docs.magicmirror.builders/configuration/introduction.html * and https://docs.magicmirror.builders/modules/configuration.html * * You can use environment variables using a `config.js.template` file instead of `config.js` * which will be converted to `config.js` while starting. For more information * see https://docs.magicmirror.builders/configuration/introduction.html#enviromnent-variables */ let config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-US", logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging timeFormat: 24, units: "metric", modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: 'MMM-2Day-NOAA-Forecast', position: 'top_right', config: { lat: LAT, lon: LONG, units: 'imperial', fontSize: '32px', interval: 10 * 60 * 1000 } }, { module: "MMM-OnThisDayWikiApi", position: "top_center", // All available positions // <= this works in landscape // position: "middle_left", // trying for vertical mode config: { // See below for configurable options, this is optional reloadInterval: 10000 } }, { module: "calendar", /* default/calendar module configuration */ // position: "top_left", config: { broadcastPastEvents: true, // <= IMPORTANT to see past events calendars: [ { url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics", name: "us_holiday", // <= RECOMMENDED to assign name color: "orange" // <= RECOMMENDED to assign color }, { url: "CALENDAR", name: "NAME", color: "purple" }, ] } }, { module: "MMM-CalendarExt3", // position: "bottom_bar", position: "lower_third", // <= works in landscape mode // position: "upper_third", // trying for vertical mode title: "", config: { mode: "month", instanceId: "basicCalendar", locale: 'en-US', maxEventLines: 5, firstDayOfWeek: 0, calendarSet: ['us_holiday', 'CALENDAR'], eventTransformer: (event) => { if (event.title.search("STB") > -1) event.color = "blue"; else if (event.title.search("St. B") > -1) event.color = "blue"; else if (event.title.search("FMCHS") > -1) event.color = "green"; else if (event.title.search("B-Day") > -1) event.color = "red"; // else if (event.description.search("Birthday") > -1) event.color = "red"; // else if (event.getDescription()?.toLowerCase().includes("birthday")) event.setColor(CalendarApp.EventColor.red); return event; } } }, { module: "MMM-Dad-Jokes", position: "top_center", // <= this works in landscape mode // position: "middle_right", // <= trying for vertical mode // color: "red", config: { updateInterval: 15000 } }, { module: 'MMM-Pir', position: 'top_left', config: { debug: false, Display: { // timeout: 2 * 60 * 1000, timeout: 60 * 1000, animate: true, // style: 1, stile: 2, colorFrom: "#FF0000", colorTo: "#00FF00", // mode: 1, mode: 2, counter: true, lastPresence: true, lastPresenceTimeFormat: "LL H:mm", availability: false, // availability: true, autoDimmer: false, xrandrForceRotation: "normal", wrandrForceRotation: "normal", wrandrForceMode: null, waylandDisplayName: "wayland-0", relayGPIOPin: 0 }, Pir: { mode: 0, // gpio: 21 gpio: 4 }, Motion: { deviceId: 0, captureIntervalTime: 1000, scoreThreshold: 100 }, Cron: { ON: [], OFF: [] }, Touch: { mode: 3 }, Governor: { sleeping: 4, working: 2 }, Sounds: { on: "open.mp3", off: "close.mp3" } } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") { module.exports = config; } -
MMM-CalendarExt3 24hr timeposted in Troubleshooting
I’m having some difficulty getting the module to show 24hr time instead of 12. Raspberry Pi 4 set to 24 hour time, and config.js is set with locale: “en-US” and timeformat: 24. Other modules show 24hr time, but Google calendar doesn’t. When viewing calendar.google.com, 24hr time is shown.
Any insights?
-
Rolling 30 day calendarposted in Utilities
Re: MMM-CalendarExt3
Is it possible to display the calendar showing the current week + 3 weeks after that? If you use mode: “month” it shows the current month but it’s not as helpful near the end of the month. If you use mode: “week” and weeksInView, I have only been able to get 3 weeks total.
Any help on new language for config.js would be helpful.
On a side note, it would also be nice if someone could comment on how to change the css to highlight the particular day, ideally by changing the white box around the current day to yellow or some other color + the date highlight bar at the top of the day.
Thank you.