This “issue” is fixed.

Advised by Sam, I ran these 2 commands to find modified files that differ from a “clean install/default” of MM.

git status
git diff

Any that varied… I ran:

git checkout <dir-tree>/file.extension

Rebuilt my config.js and found that apiBase HAS to be commented out.

On reflection DO NOT CHANGE ANY FILE aside from “config.js”
I had 3 causes for this issue.

• (edit) i had longitude set in config.js to “long:”… it should be “lon:” and the lat/lon do not have to be surrounded by any quote marks.
• I’d modified other *.js files, that didn’t need to be modified.
• the “apiBase” argument listed in (MagicMirror Documentation > Modules > Weather Module > Configuration Options) was, in my case, not “REQUIRED”.
  

@sdetweil … Sam, publically, I cant thank you enough for your help with this. Sorry for being a n00b, your insight and help was invaluable, and you taught me some stuff, which is great!!

@karsten13
also… replace the hash symbols with various numbers… im not posting my exact Lat/Long for obvious reasons…

make sure ur doing

lat:

and

lon:

i had it set to lat & lon(G) which is incorrect. hence why it was 80+miles, way tf over there!

quote marks or none surronding the numbers doesnt appear to matter, for me at least

@karsten13

i too am getting this… showing me some 80+miles SEE of my actual location

Just to update the forum, as to what happened behind closed doors

Sam kindly tested my code, and it worked for him.

I am recieving browser errors (previously requested but i wasnt looking in the right bit of the browser window)… he is not

Issues Tab

Console Tab

the last 5 entries here will reoccur, im guessing at every “retry” for weather info

attempted to use useCorsProxy: true to no avail

Sam kindly posted into git hub issues.
https://github.com/MichMich/MagicMirror/issues/271

@sdetweil

weather.js and weatherprovider.js i have set back to defaults.

i have set config.js as requested

  weatherProvider: 'ukmetofficedatahub',
  lat: "52.###############",
  long: "-1.###############",
//apiBase: 'https://api-metoffice.apiconnect.ibmcloud.com/v0/forecasts/point/daily/',
  apiKey: 'e52#############################',
  apiSecret: 'd3a#############################',

the result:-

@Kayababe @sdetweil

openweathermap works… albiet the location its suggested is 3 miles down the road. (ukmetoffice has data for 2 streets away)

@sdetweil,

apiBase commented out in config.

server restart, and browser log request, showing loaded weather modules

i still have “loading” in module location

looking at source gives me the impression that i need to go and look at 2 more .js files. Previously i have been working with /default/weather/ukmetofficedatahub.js and /MagicMirror/config/config.js

ill see if thes hold any info:
/root/MagicMirror/modules/default/weather/weatherproviders.js
(Edit: //weather provider properties: null, modified to:
)

/root/MagicMirror/modules/default/weather/weather.js
(Edit: this file is set to “openweathermap”, changing to “ukmetofficedatahub”

)

server restart, no effect noted :(

@kayakbabe
For some reason i glossed over your reply, apologies.

Trying with a different provider will be my plan of attack today. After running some diag, as sam has suggested.

I find the met office to be insanely accurate for my area when compared to other online weather services. Hence my desire to use it.

One of the reasons my posts are peppered with pictures and code is to help ensure i am setting it up correctly. I didnt realise about the .js in the weather folder for 2 days i thought it was all set up from config.js…

As it stands im convinced i have it set right, now, but its totally possible i have a comma in the wrong place. As im a total n00b with JS. i know sometimes it is difficult to see the forest through the trees and a fresh set of eyes can help.

Thank-you for your reply, looks like im experiencing option 4 😄

any ideas?? @sdetweil

Is this portion of the module broke for me, do i need to use a different service?

I’m stumped!

As outlined here

ukmetofficedatahub.js is set to

        // Set the default config properties that is specific to this provider
        defaults: {
                apiBase: "https://api-metoffice.apiconnect.ibmcloud.com/v0/forecasts/point/daily/",
                apiKey: "<myID>",
                apiSecret: " <my secret>",
                lat: <my lat>,
                lon: <mylong>,
                windUnits: "mph"

(lines 50-55)

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

config.js set to

  		weatherProvider: "ukmetofficedatahub",
  		apiBase: "https://api-metoffice.apiconnect.ibmcloud.com/v0/forecasts/point/daily/",
  		apiKey: "<myID>",
  		apiSecret: " <my secret>",
  		lat: <my lat>,
  		lon: <my long>,
 		windUnits: "mph",
 		tempUnits: "metric",

(lines 20-27)

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

logs are clear… many server restarts…

i can curl required info and get something vaguely intelligent from the Met office Servers

curl --request GET \
  --url 'https://api-metoffice.apiconnect.ibmcloud.com/v0/forecasts/point/hourly?excludeParameterMetadata=false&includeLocationName=true&latitude=<my lat>&longitude=<my long>' \
  --header 'X-IBM-Client-Id:  <myID>' \
  --header 'X-IBM-Client-Secret: <my secret>' \
  --header 'accept: application/json'

in addition… looking at “ukmetofficedatahub.js”
API Base URL looks like this…
apiBase: “https://api-metoffice.apiconnect.ibmcloud.com/v0/forecasts/point/<hourly/3hourly/daily>”,

where as the next section down API URL is stated to be
“https://metoffice.apiconnect.ibmcloud.com/metoffice/production/api”

seems to be a mismatch although im still looking at where to test that theory…
i would have hoped which ever way the URL is structured its the JS info thats the important bit, not the structure of the URL

@sdetweil

could it be *js file setup.

been poking around on the Met Office website

is this “request” something that could be used

GET https://api-metoffice.apiconnect.ibmcloud.com/v0/forecasts/point/hourly?latitude=52.################&longitude=-1.################
Headers:
Accept: application/json
X-IBM-Client-Id: e52######################
X-IBM-Client-Secret: *********

a “Header”

cache-control: no-cache, no-store, max-age=0, must-revalidate
content-length: 3634
content-type: application/json
expires: 0
pragma: no-cache
x-global-transaction-id: 9####################
x-ratelimit-limit: name=rate-limit-1,360;
x-ratelimit-remaining: name=rate-limit-1,358;

theres also a “Body” that starts

{
    "type": "FeatureCollection",
    "features": [
        {
            "type": "Feature",
            "geometry": {
                "type": "Point",
                "coordinates": [
                    -1.###,
                    52.###,
                    ###
                ]
            },
            "properties": {
                "requestPointDistance": 736.6499,
                "modelRunDate": "2022-06-28T13:00Z",
                "timeSeries": [
                    {
                        "time": "2022-06-28T13:00Z",
                        "screenTemperature": 19.6,
                        "maxScreenAirTemp": 19.6,
                        "minScreenAirTemp": 19.1,
                        "screenDewPointTemperature": 7.7,
                        "feelsLikeTemperature": 16.83,
                        "windSpeed10m": 5.1,
                        "windDirectionFrom10m": 200,
                        "windGustSpeed10m": 11.3,
                        "max10mWindGust": 13.42,
                        "visibility": 24714,
                        "screenRelativeHumidity": 46.06,
                        "mslp": 101420,
                        "uvIndex": 4,
                        "significantWeatherCode": 3,
                        "precipitationRate": 0,
                        "totalPrecipAmount": 0,
                        "totalSnowAmount": 0,
                        "probOfPrecipitation": 1

i hashed out sensitive info BTW, the Long/lat and API Keys

@sdetweil
:grinning_face_with_smiling_eyes: always the way.

@sdetweil
many restarts as i was modifying and testing layouts and features

couple of syntax errors, when i was playing around last night.

(blanked out sensitve info on calendar line)

@sdetweil said in Struggling with Weather... module:

you can do pm2 flush to empty the log and then start again (pm2 restart all)

@thgmirror I’d gladly try, but I’d need an API key, my friend.
without an API for that particular weather service, it will just come up with “loading” as the server will not give the info to you.

i saw the post of yours earlier, but as it didnt match my issue with UK Met Office weather service.

@sdetweil

hi all
been trying for a while to get the default “weather” app to work for me and im struggling a little bit, NPM syntax check comes back clean.

im 95% sure i have all the relevant info in the config.js file.

But im not seeing weather output on screen.

Figured i’d put it here instead of Discord.

All suggestions warmly recieved

Hi all,

I’ve spent the past week furiously trying to get MM to run in an LXC in “server mode” and to use a Pi0 as the “Client” that will be attached to the screen of the MM.

I put together a Github for how to do it, I’d really appreciate any feedback for making the Pi0 side more lightweight, if at all possible, but also posting here just so people are aware it is an option for those who want to utilise LXC for their MM Server or a Pi0 as their client regardless of what server option they pick.

https://github.com/D3dl3g/Magic-Mirror