Installed this on my pi3 for the Mp select mini today. This is great!

Maybe look into a laptop screen, though I don’t think you would be able to find one to fit your whole mirror.
I use my old laptop’s 15.6in screen with a controller board. The screen and controller board are less than 1.5cm thick but the power brick is about 4 cm thick if i recall correctly.
I never got around to building a frame for it so it just sits on a desk(I don’t use a mirror).

You can link your alexa shopping list with todoist and install the todoist magic mirror module.

@Sean
Hey, is there a way to rename/hide the location of an event for a specific calendar?
Similar to the replaceTitle configuration.
Thanks,

@aro28 “Ok google, set volume to max” should do it

I have been thinking about a work around for to run this on a pi3 because I really want this module on my set up.
Would it be possible to render a full rotation(or 5/6 of them) on the pi and output it to a video/gif, then have it play on a loop on the MM?

You should take a look at this
How to Create an alexa Security Profile

@Mykle1 I agree with you on that.
There’s no reason to upgrade to stretch unless you really need to. In my case, I had to upgrade to stretch because the latest alexa sdk doesn’t support jessie. When I say upgrade, I moved every thing to a new card.
My pi zero runs pihole + open vpn and is still on jessie. No reason to switch that one unless the foundation stops releasing updates for jessie.

Yes, my pi runs MM with about 10 modules and the amazon alexa sdk.
I documented the process here.
[link text]https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=198501(link url)

@Mykle1
Hey,
I was able to get bluetooth audio to work on Raspbian stretch. I tried it last weekend and ran into some issues but I was able to solve(with some help from the raspberry pi forum) it this morning. I’ve had a stable connection for about 3 hours.

@Sean I’ll stick to my $10 PS3 camera which already has a decent mic!

@Fix-Not-Found I’ve got everything on a pi3 now not sure how I fixed this back then.

@devtech8 Just remembered there was something else too.
Did you take a look at this?
https://github.com/cbrooker/MMM-Todoist/issues/16

@devtech8 Everything else seem fine.

Go to settings then integrations on the todoist website. You’ll find your api token there.

Had the same issue. added

address:"0.0.0.0",

to the config and it’s working again.
https://github.com/MichMich/MagicMirror/issues/1036

@Mykle1 My bad, I had a long day.
I’ll let you know once I try a Stretch image.

@Mykle1 I’ll try to get an sd card and give Stretch a try. The extra sd card I have died.(PS: Don’t buy Lexar. Card only lasted for 6months). I use my PI3 for amazon alexa and MM. Aside from not having a spare card, main reason I haven’t tried stretch yet is because the alexa code on github does not support stretch yet.

These disable bt and wifi:

dtoverlay=pi3-disable-bt
dtoverlay=pi3-disable-wifi

@Mykle1 said in No Country (Bluetooth) For Old Men:

@d3r

It was only when prompted to update the firmware for Stretch that this happened.

Hang on, so you upgraded the same card from Jessie to Stretch? They recommend not doing that because it can potentially break stuff.
See this:

HOW TO GET RASPBIAN STRETCH

As this is a major version upgrade, we recommend using a clean image; these are available from the Downloads page on our site as usual.

Upgrading an existing Jessie image is possible, but is not guaranteed to work in every circumstance. If you wish to try upgrading a Jessie image to Stretch, we strongly recommend taking a backup first – we can accept no responsibility for loss of data from a failed update.

https://www.raspberrypi.org/blog/raspbian-stretch/

@Mykle1 Out of curiosity, you start with a fresh Stretch image or upgrade from Jessie?
I’m taking a look at my config. I have my onboard BT disabled.

@Mykle1 I haven’t tried stretch yet. I don’t have a spare microsd card. Did you check your /boot/config.txt?
Maybe both wifi and bt are disabled in the config.