Posts made by habedehab

Yes it is. I can see white lights coming out from the back of the display.

So…I got the right LCD Cable for my screen, i connected it to my controller board. After I turn it on i dont get the white screen anymore, but now its black. The board reacts to the remote (changes color when i press a button) but i cant find a way to get a picture on screen. I already tried the hdmi and vga port, but had no success.

Did I miss something? Or is the board i bought broken?

@MadScientist …I can’t find one where the cable matches. Either the power cables are on the left side and not like my panel, or the GND Cables are not matching at all…how to I proceed now?

Hello @MadScientist,
I bought this Controller board

https://m.banggood.com/de/T_SK106A_03-Universal-LCD-LED-TV-Controller-Driver-Board-+7-Key-button+1ch-6bit-30Pins-LVDS-Cable+1-Lamp-Inverter+Speaker+EU-Power-Adapter-p-1401877.html?akmClientCountry=DE&rmmds=search&act_poa=SKUA72427&cur_warehouse=CN

cause it looked like a good kit to install my monitor.
Then I realized that I need a different inverter so I ordered this on too:

https://m.banggood.com/de/4-Lamp-Universal-CCFL-Inverter-10V-30V-Output-For-15-24-inch-LCD-Display-Monitor-With-4-Cords-p-1497719.html?akmClientCountry=DE&rmmds=orderdetail

Now after installing the firmware and flashing it on the board and connecting all the cables, my screen just turns white. I have to mention that the firmware installing process didn’t go like in the description. My led turned on red and after a couple of seconds it turned off. After a couple of minutes I turned it off and on again an then it went from red to blue.
Can you or anybody else help me with my white screen? Is it because of the firmware or do need to get a different LVDS cable? I can do pictures if needed

@MadScientist thank you for the answer, that’s was very helpful. I tried to find a LCD board with a p two connection (that’s the cable from my monitor). Do I need to get some kind of adapter or how can I connect a P-two cable into a LVDS Board? :(

Hello, this is my first Magic Mirror and I’m struggling with the hardware. I bought a used TV with a LG LC220WXE TBA1 screen.
Now I want to buy a new controller board but don’t know which one to chose and how to power it. I’m a total newbie so please help me out!