Posts made by jeaniouso

jeaniouso

@Mykle1 That DID THE TRICK!!!

jeaniouso

@Mykle1 Hi There! yes I wanted to get a near accurate location of the same area or at least the immediate surrounding area versus just having the general NYC temp… I kinda wanted to at least get a neighborhood close to weather the temperature might be … Let me fix that… Thanks as ALWAYS

jeaniouso

@sdetweil Got it … I’m learning i’m learning lol

jeaniouso

@sdetweil I did , I just removed it for privacy reasons.

jeaniouso

Hi All!

I just installed a transit module last night after feverishly trying to get it to work for hours so, after success with that thanks to two members, I now have another problem. The current weather portion of my MM no longer shows up. I tried disabling the new module however that doesn’t help. I also tried an entire different API and with that variable it’s still the same… Please help… Thanks…```

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	timeFormat: 12,
	units: "imperial",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		  
		{
    module: 'MMM-nyc-transit',
    position: "top_bar",
    header: "Next Train",
    config: {
      apiKey: '632718b7d31a32ec745fd296c6d824a0',
      displayType: 'list',
      mtaType: 'train',
      stations: [
        {
          stationId: 604,
          walkingTime: 5,
          dir: {
              upTown: true,
              downTown: false
          }
        },
        {
          stationId: 604,
          walkingTime: 5,
          dir: {
            upTown: false,
            downTown: true
          }
        }
      ],
      updateInterval: 300000
    }
  },
  
		

		
  
  
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "5133268 ", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: ""
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "884eb65b89072dea57b1be818275ceca"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

jeaniouso

@sdetweil I stand corrected. The APIKEY in the code is mine… I just confirmed

jeaniouso

@sdetweil I did but, for some reason it’s not working hence why I used the other one

jeaniouso

@sdetweil @Mykle1

Thank you so much for your tireless efforts! I finally have it working… I played around with the script after getting rid of errors pointed out by @Mykle1 plus his tutorial was excellent as I read it again and I opted for another API key that I found on here as suggested by @sdetweil … I finally got it working thanks to you two!! Now I can rest lol… Man what a workout!!!

jeaniouso

@Mykle1 ```
code_text

 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
  
  
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

jeaniouso

@Mykle1 /* Magic Mirror Config Sample
*

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
For more information on how you can configure this file
See https://github.com/MichMich/MagicMirror#configuration

*/

var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out or empty, is “localhost”
port: 8080,
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

language: "en",
timeFormat: 24,
units: "metric",
// serverOnly:  true/false/"local" ,
		     // local for armv6l processors, default
		     //   starts serveronly and then starts chrome browser
		     // false, default for all  NON-armv6l devices
		     // true, force serveronly mode, because you want to.. no UI on this device

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "US Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
			]
		}
	},
	{


	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "New York",
			locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "New York",
			locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "New York Times",
					url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true,
			broadcastNewsFeeds: true,
			broadcastNewsUpdates: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

jeaniouso

@jeaniouso [0_1589594860883_config.js](Uploading 100%)

jeaniouso

@Mykle1 I followed your posting I believe as much as possible.

jeaniouso

@Mykle1 Hi Mykle, I appreciate your reply… I see that you’re in the big apple like me , I hope that you’re well and staying healthy.

So, I tried adding ; to the last curly and I restarted MM however, a splash screen popped up upon restart.

jeaniouso

))

I hope that everyone is well and healthy at this time. So, I successfully installed magic mirror as well as a module after several attemps and several segues to make it happen.

I’ve been struggling trying to install the MTA Subway Module however, after several attempts with use of the newbie guide to modules, It finally worked and didn’t cause my MM to corrupt however, none of the modules that I have personally installed doesn’t seem to work for some strange odd reasoning . I have posted on what I think is a decent config script however, I notice that my line of module is a bit off from the program file…

I’ve included a screenshot .

Thank you