MTA MODULE MM NEWBIE HERE!

Mykle1

At first glance, I see you’re missing a closing comma at the end of the transit module entry. You can start there. :-)

        updateInterval: 300000
    }
},

jeaniouso

@Mykle1 Hi Mykle, I appreciate your reply… I see that you’re in the big apple like me , I hope that you’re well and staying healthy.

So, I tried adding ; to the last curly and I restarted MM however, a splash screen popped up upon restart.

jeaniouso

@Mykle1 I followed your posting I believe as much as possible.

sdetweil

@jeaniouso he said “a closing comma”, not semicolon,

the config is a list (array ) of module entries
each starts with { and ends with }
if there is another one coming, add a ‘,’ to the end of the 1st, to say ‘more coming’

it won’t hurt to have a ‘,’ after the module block }

modules: [                                  // start of list (array)
{                                           // start of a module 
...
}                                           // end of a module entry
,                                           // another entry to follow
{
...
}, 
etc
etc
]                                           // end of the modules list (array)

jeaniouso

@jeaniouso [0_1589594860883_config.js](Uploading 100%)

jeaniouso

@Mykle1 /* Magic Mirror Config Sample
*

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
For more information on how you can configure this file
See https://github.com/MichMich/MagicMirror#configuration

*/

var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out or empty, is “localhost”
port: 8080,
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

language: "en",
timeFormat: 24,
units: "metric",
// serverOnly:  true/false/"local" ,
		     // local for armv6l processors, default
		     //   starts serveronly and then starts chrome browser
		     // false, default for all  NON-armv6l devices
		     // true, force serveronly mode, because you want to.. no UI on this device

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "US Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
			]
		}
	},
	{


	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "New York",
			locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "New York",
			locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "New York Times",
					url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true,
			broadcastNewsFeeds: true,
			broadcastNewsUpdates: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

jeaniouso

@Mykle1 ```
code_text

 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
  
  
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

sdetweil

@jeaniouso but that is the default config.js, not the one w the module u are having trouble with…

Also, u can edit your forum posts to correct posting errors.
.I worked w u tonight, and u had the modules installed correctly, but the API key was not correct for some reason

jeaniouso

@sdetweil @Mykle1

Thank you so much for your tireless efforts! I finally have it working… I played around with the script after getting rid of errors pointed out by @Mykle1 plus his tutorial was excellent as I read it again and I opted for another API key that I found on here as suggested by @sdetweil … I finally got it working thanks to you two!! Now I can rest lol… Man what a workout!!!

sdetweil

@jeaniouso said in MTA MODULE MM NEWBIE HERE!:

I opted for another API key that I found on here

u are supposed to create a new apikey on the train providers web site